Samsung HT-AS730ST - Manuals

E N G ● COntent S safety information 2 2 Safety Warnings 3 Precautions features 4 4 Accessories description 7 7 Front Panel 8 Rear Panel 10 Display11 Insert Remote Control Batteries11 Operation Range of the Remote Control12 Tour of the Remote Control connections 14 14 Speaker Positioning16 Connectin...

Contents troubleshooting 59 59 Troubleshooting appendix 61 61 Specifications miscellaneous 56 56 Operating Your TV with the Remote Control58 Operating Your DVD or BD with the Remote Control HT-AS730S-XAC_0213.indd 6 2009-02-16 �� 5:05:55

E N G ● D e SCri P ti O n frOnt PaneL 1 STANDBY/ON button Sets the AV receiver to Standby. 2 VOLUME Control Adjusts the volume level. 3 SELECT button Used to change the radio frequency or select detailed options in Surround mode. 4 TUNING MODE button Used to select Manual or Auto mode for FM radio. ...

Description rear PaneL 1 FM Antenna JACK Connect the FM Antenna here. 2 7.1 CH ANALOG AUDIO INPUT JACKS Receives the analog audio signal from an external player with a multi-channel port. 3 VIDEO INPUT JACKS Receives the video signal from a video player (DVD, SAT, TV, VCR). 4 HDMI INPUT JACKS Receiv...

10 DiSPLay 1 SPEAKER INDICATORS Receives the audio/video signal from an iPod. 2 LISTENING MODE INDICATORS Displays the current listening mode. 3 TUNING INDICATORS Displays the status of the current radio broadcasting. 4 AUDIO INPUT INDICATORS Displays the input signal type of the current audio sourc...

11 E N G ● DeSCri P ti O n inSert reMOte COntrOL BatterieS follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–). Use the correct type of batteries. Batteries that look similar may differ in voltage.A...

1 tOUr Of tHe reMOte COntrOL HT-AS730S-XAC_0213.indd 12 2009-02-16 �� 5:06:01

1 SPeaker POSitiOning Position of aV receiver Place AV Receiver on a dedicated stand or rack. Subwoofer SBL SBR The position of the subwoofer is not so critical. Place it anywhere you like. Subwoofer function Active subwoofer with integrated 150W amplifier provides rich bass sound. Connect the SW OU...

1 E N G ● COnne C ti O n S SPeaker POSitiOning (COntinUeD) Center speaker SBL SBR It is best to install it at the same height as the front speakers.You can also install it directly over or under the TV. Surround Speakers SBL SBR SBL SBR Place these speakers behind your listening position.If there is...

1 COnneCting tHe SPeakerS Connecting Speaker Wire Loosen the knob by turning counterclockwise.Insert the bare part of the wire into the hole in the side of each terminal.Tighten the knob by turning clockwise to secure the wire. Keep the subwoofer speaker out of reach of children to prevent them from...

1 E N G ● C O nne C ti O n S COnneCting tHe ViDeO OUt tO yOUr tV Video Connection If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video I...

1 COnneCting eXternaL DeViCeS/yOUr tV Via HDMi HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, settop box and more.HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was...

1 E N G ● C O nne C ti O n S HDMi fUnCtiOn Using anynet+(HDMi-CeC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSU...

0 COnneCting a DVD Or BD(Blu-ray) PLayer Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (DVD) (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. or Connect a Video cable from the VIDEO IN (DVD) jack...

1 E N G ● C O nne C ti O n S COnneCting a CaBLe, SateLLite Or Set-tOP BOX Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT. or Connect a Video cable from ...

COnneCting a VCr Video Connection for playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. for recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VC...

E N G ● C O nne C ti O n S COnneCting a CD PLayer audio Connection Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player. or Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player. If the external component has only one audio output jack,...

COnneCting 7.1 CHanneL DeViCeS You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output. FRONT SURROUND SURROUND BACK SUB WOOFER CENTER C SW SW C 5.1 CH7.1 CH 7.1 Channel device HT-AS730S-XAC_0213.indd 24 2009-02-16 �� 5:06:34

E N G ● COnne C ti O n S COnneCting an iPod You can listen to the audio from an iPod through the main unit. For iPod operation with your receiver, see pages 26 and 54 ~ 55. Connect the iPod dock connector to the iPod jack on your reciever.Place the iPod in the Dock. If you want to play a movie store...

COnneCting an iPod (Continued) iPod models that are compatible with Ht-aS730S “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.Apple is not responsible for the operation of...

ENG ● COnneCtiOnS COnneCting tHe fM antenna Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface. Do not place the antenna cable cl...

Setup For your convenience, you can set this AV receiver's features for the best use. SetUP MenU tree Here’s a quick look at how the setup menus are organized on your AV Receiver. INPUT COAXIAL DVD OPTICAL 1,2,3 COAXIAL SAT OPTICAL 1,2,3 COAXIAL TV OPTICAL 1,2,3 COAXIAL CD OPTICAL 1,2,3 COAXIAL AUX ...

inPUt SetUP Selecting a source device and connection jack Select the external devices you have connected to the receiver. Press SETUP/MENU button “INPUT” appears on the display and goes into Setup Mode. Press the ▶ button to select a desired device. Press the ▲ or ▼ button to select a desired jack. ...

E N G ● S etUP SPeaker SetUP Setting the speaker size Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not. Press SETUP/MENU button. “INPUT” appears on the display. Press ▲▼ button to select “SPEA...

SPeaker SetUP (Continued) Setting the speaker listening distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. Press SETUP/MENU button. “INPUT” appears on the display and goes...

E N G ● S etUP SPeaker SetUP (Continued) Setting the speaker level You can set the balance and level of speakers. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SPEAKER", and then press the ENTER . Press ▲▼ button to select "S...

SPeaker SetUP (Continued) Setting the test tone Use the test tone to check the speaker connection status or level. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SPEAKER", and then press the ENTER . Press ▲▼ button to select "...

E N G ● S etUP SUrrOUnD SetUP Setting the stereo mode You can select this mode when listening to sound through the front left and right speakers and subwoofer. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SURROUND", and then pre...

SUrrOUnD SetUP (Continued) Setting Dolby Pro Logic ii X mode This mode provides 7.1 channel sound from 2 channel sources. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SURROUND", and then press the ENTER . Press ▲▼ button to sele...

1 E N G ● S etUP SUrrOUnD SetUP (Continued) Setting tone Control This will enable you to adjust the bass and treble level. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SURROUND", and then press the ENTER . Press ▲▼ button to sel...

OPtiOn SetUP The Option menu enables you to make different audio settings to enhance your AV receiver experience. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select the “OPTION”, and then press the ENTER . Press ▲▼ ◀▶ button to set the OPTION ...

OPtiOn SetUP (Continued) DrC You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. Each time you press ▲▼ button, DRC : STD  DRC : MIN  DRC : MAX will be selecte...

E N G ● O P erati O n Operation BefOre USing tHe aV reCeiVer turning On/Off Connect the power plug to the outlet.Press the POWER button of the remote control. This unit will be turned on or set to Standby mode. remote control functions You can operate your AMP (this AV receiver), TV, DVD and BD play...

SeLeCting DigitaL/anaLOg inPUt You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit.Press the INPUT MODE button on the remote control to select the external device you have connected. Each time you press this button, input mode changes as follows: for DVD/Sat function ...

E N G ● O P erati O n USing tHe SUrrOUnD MODeS Using the neO:6 MODe button Press neo:6 mode button.- Each time you press this button, MUSIC  CINEMA will be selected in turn. Using the Sfe MODe button Press sfe mode button. Each time you press this button, HALL 1  HALL 2  J.CLUB  CHURCH  ROCK  ...

USing tHe SUrrOUnD MODeS (Continued) Using the SUrrOUnD button on the front of the main unit selecting the neo:6 mode Press SURROUND button briefly to select “NEO:6” mode. Each time you press this button, STEREO  PLIIx  NEO:6  SFE will be selected in turn. Press SELECT ( . , , ) button. Each time...

0 USing tHe SPeaker aDJUStMent BUttOnS Using the SPk SeLeCt button Press spK select button to select the speaker you want. Each time you press this button, FRONT  CEN  SURR  S.BACK  S.W  CROVR  SPK MODE OFF will be selected in turn Press ▲▼ button to set the mode (Large, Small etc.) for the se...

1 E N G ● O P erati O n LiStening tO tHe raDiO You can listen to the radio by using either automatic or manual tuning. Press TUNER button. Selected frequency. Automatic tuning 1 : 1) Press TUNING MODE button to select PRESET. 2) Press TUNING/CH ( . , , ) button to select the preset frequency. Automa...

USing an iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (iPOD audio function) You can play music files stored in the iPod player by connecting it to the AV receiver. Connect the iPod dock connector to the iPod jack on the AV Receiver.Place the iPod in ...

COnVenient fUnCtiOnS Sleep timer function You can set the time that this unit will shut itself off. Press SLEEP button. SLEEP : OFF  15  30  45  60  90  120 M (MIN) will be selected in turn. to check sleep timer Press the SLEEP button. The remaining time before this unit will shut itself off i...

E N G ● O P erati O n COnVenient fUnCtiOnS (Continued) adjust the display You can adjust the brightness of the display. Press the DIMMER button. Each time you press this, the brightness changes as follows : DARK  BRIGHT. Using headphones Use headphones (not supplied) for private listening pleasure....

Miscellaneous OPerating yOUr tV WitH tHe reMOte COntrOL Press POWER button to turn on the TV. Press TV button to set the remote to TV mode. Point the remote control toward the TV.While holding down POWER button, enter the code corresponding to your brand of TV. If there is more than one code listed ...

E N G ● M iSCe LL ane OUS TV Brand Code List Brand Code Number Brand Code Number Brand Code Number Admiral (M.Wards) 056, 057, 058 Luxman 018 Sylvania 018, 040, 048, 054, 059, 060, 062 A Mark 001, 015 LXI (Sears) 019, 054, 056, 059, 060, 062, 063, 065, 071 Anam 001, 002, 003, 004,005, 006, 007, 008,...

OPerating yOUr DVD Or BD PLayer WitH tHe reMOte COntrOL Press POWER button to turn on the DVD (BD) player. Press DVD (BD) button to set the remote to DVD (BD) mode. If you operate VCR, press VCR button to set the remote to VCR mode. Point the remote control toward the DVD (BD).While holding down poW...

E N G ● trOUBL e SHOO ting Troubleshooting Before requesting service, please check the following. Symptom Check Remedy The unit will not turn on. • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there stati...

0 Symptom Check Remedy There is no sound from surround back speakers • Are the surround back speakers connected properly? • Is the S.BACK(Surround Back) selected to NONE in Speaker Setup? • Is Surround Mode set to EX/ES? • Refer to pages 14 ~16 to connect it properly. • Refer to page 33 to select LA...

1 E N G ● a PPenD iX Appendix SPeCifiCatiOnS GENERAL Power supply 120V, 60 Hz Standby power consumption 0.9W Power consumption Main unit 75W Subwoofer 90W Weight 12.7 Ibs Dimensions (W x H x D) 16.9 x 5.7 x 13.7 inches Operating temperature range 41°F~+95°F Operating humidity range 10%~75% FM TUNER ...

LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workm...