Samsung HL-S5679W - Manuals

SAMSUNG BP68-00587A-00Eng(002~017) 4/28/06 7:43 PM Page 8

Your New Wide TV BP68-00587A-00Eng(002~017) 4/28/06 7:43 PM Page 9

Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. Your New Wide TV English - 10 When installing the product, make sure to keepit away from the wall (more ...

Your New Wide TV English - 12 Front Panel Indicators The three lights on the front panel indicate the status of your TV. Indicator Light Key TIMER Standby state. The picture will automatically appear in about 15 seconds.Auto Timer ON/OFF has been set and the set will automatically beturned on in abo...

Your New Wide TV English - 14 Rear Panel Jacks Œ CableCARD TM Insert a CableCARD into the slot. (Refer to page 22) ´ S-VIDEO INPUT jacks Connects an S-Video signal from an S-VHS, VCR or DVD player. (Refer to page 21) ˇ VIDEO/AUDIO INPUT jacks Connect video/audio signals from external sources, such a...

English - 15 Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player and Set-top box. See pages 38~44 for details. 1. POWER Turns ...

Your New Wide TV English - 16 Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performancedegradation while using the remote, the batteries may need to be replaced. Make sure you replace bothbatteries and do not...

Connections BP68-00587A-00Eng(002~017) 4/28/06 7:43 PM Page 17

Connections English - 18 Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead intothe ANT 2 IN (AIR) on the rear panel of...

English - 19 Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable intothe ANT 1 IN (CABLE) on therear panel of your TV. Cable ...

Connections English - 20 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxialcables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect thecable ...

English - 21 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack 1 Connect a video cablebetween the VIDEO IN (1 or 2) (or S-VIDEO IN 1 or 2)jack on the TV and theVIDEO (or S-VIDEO) outputjack on the VCR. 2 Connect a set of audio cables between the AUDIOIN (1 or 2) jacks on the TVand...

Connections English - 22 Connecting CableCARD You must obtain a CableCARD from a local cable service provider. 1 Insert the CableCARD into the “CableCARD” slot andthe message “CableCARD TM Inserted” is displayed on the screen. If the channel information does not already exist, the message“Updating C...

Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV.You can use your camcorder to view tapes without using a VCR. 1 Locate the A/V output jackson the camcorder. They areusually found on the side orback of the camcorder. 2 Connect a video or S-Video c...

Connections English - 24 Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to HDMI (High Definition Multimedia Interface) 1 Connect an HDMI cablebetween the HDMI IN 2 (orHDMI 1/DVI IN) jack on theTV and the HDMI OUT jack onthe DVD pla...

English - 25 Connecting to Audio and Video Jacks 1 Connect a video cable between the VIDEO IN (1or 2) jack on the TV and theVIDEO OUT jack on the DVD player. 2 Connect a set of audiocables between the AUDIOIN (1 or 2) jacks on the TVand the AUDIO OUT jackson the DVD player. NOTES • Component Video s...

Connections English - 26 Connecting a DTV Set-Top Box Connecting to Y, P B , P R 1 Connect a set of Componentcables between the COMPONENT (1 or 2) VIDEO(Y, P B , P R ) IN jacks on the TV and VIDEO (Y/P B /P R or Y/C B /C R ) OUT jacks on the Set-Top Box. 2 Connect a set of audio cablesbetween the CO...

English - 27 Connecting a VCR and DTV Set-Top Box 1 Connect the Video or S-Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. 2 Connect the Video/Audiocables between the VIDEO or S-VIDEO/AUDIO inputjacks on the TV and VIDEO...

Connections English - 28 Connecting a Digital Audio System There are many types of digital audio systems on the market today.A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. 1 If your audio system has anoptical digital audio inp...

English - 29 Connecting to an Analog Amplifier 1 The “AV OUT (AUDIO L/R)”jacks cannot be used for external speakers. You must hook them up to anamplifier. When an audio amplifier is connected to the “AV OUT (AUDIO L/R)” jacks: Decrease the gain (volume) of the TV, and adjust thevolume level with the...

Operation BP68-00587A-00Eng(018~031) 4/28/06 7:44 PM Page 31

Turning the TV On and Off Press the POWER button on the remote control.You can also use the (Power) button on the front panel. Dynamic Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on...

English - 33 Navigating Menus by Using the Menu Map Using the Menu Map of the main menu enables you to view all menus and select a function quickly. You can select any menu by using the menu map. 1 Press the MENU button.The main menu will appear at the bottom of the screen. 2 Press the œ or √ button...

English - 34 Operation Selecting a Menu Language When you start using your television for the first time, you must select the language which willbe used for displaying menus and indications. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the …...

English - 35 Memorizing Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cablechannels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering th...

English - 37 Changing Channels Using the Channel Buttons When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.)You will not see channels that were either erased or not mem...

Operation English - 38 Customizing Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, VCR,Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you toswitch between these modes, and control whicheve...

English - 39 Setting Up the Remote to Operate Your Cable Box 1 Turn off your cable box. 2 Press the CABLE button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the cable box code listed on page ...

English - 40 Operation Setting Up the Remote to Operate Your DVD 1 Turn off your DVD. 2 Press the DVD button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the DVD code listed on page 44 of this...

English - 41 Setting Up the Remote to Operate Your Set Top Box 1 Turn off your STB. 2 Press the STB button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the STB code listed on page 43 of this m...

Operation English - 42 Remote Control Codes continued... VCR Brand SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO LG(Goldstar) HARMAN KARDON H...

English - 43 Remote Control Codes continued... CABLE BOX Brand SAMSUNGGIHAMLINHITACHIJERROLDMACOMMAGNAVOXOAKPANASONICPHILIPSPIONEERRCAREGAL Code 000 001 002 003 004 005 006 007041003 024 031025 030038 039025 030019 023 028026003 022 027 037 044019 021 023 028004 018 020 044014 022 040003 Brand REGEN...

Operation English - 44 Remote Control Codes SAMSUNG DVD Product DVDDVDRBD RecordVCR COMBOVCR RecordDHR COMBO Code 000 001 002003 004005 006007 008 009 010 011 012013 Product Home Theater VCR COMBOHDD Record COMBOTWIN TRAY COMBOSTB DVD COMBODVD ReceiverAV Receiver Code 014 015 016017018019020021 DVD ...

English - 45 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV.Also, you can check the time while watching the TV. (Just press the INFO button.) 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press...

Operation English - 46 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Clock”, then press the ENTE...

English - 47 Setting the On/Off Timer 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Timer”, then press the ENTER button.Press the … or † button to select “On Timer”, then press the ENTERbutton.Press the … or † bu...

English - 48 Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Timer”, then press the ENT...

English - 49 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment,such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select“Input”. 2 Press ...

English - 50 Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. 1 Press the MENU button. Press the ENTER button to select“Input”. 2 Press the … or † button to select “Edit Name”, then press the ENTERbutton. 3 Press the … or † button...

Channel Control BP68-00587A-00Eng(032~059) 4/28/06 7:43 PM Page 51

Channel Control English - 52 Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV).This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button onthe remote control. Preset : To use the Chan...

English - 53 Viewing the Channel Lists You can display a list of all channels, added channels, or your favorite channels. Preset : To use the Channel Manager function, first run Auto Program (see pages 35~36). 1 Press the MENU button.Press the œ or √ button to select “Channel”, then press the ENTERb...

English - 54 Adding and Erasing Channels Preset : To use the Channel Manager function, first run Auto Program (See pages 35~36). 1 Press the MENU button.Press the œ or √ button to select “Channel”, then press the ENTERbutton. 2 Press the … or † button to select “Channel Manager”, then press theENTER...

English - 55 Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or ablank. When the INFO button is pressed, the channel label will appear. 1 P...

English - 56 Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the œ or √ button to select “Channel”, then press the ENTER button. 2 Press the … or † button to select “Fine Tune”, then press the E...

English - 57 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.Y...

Picture Control BP68-00587A-00Eng(032~059) 4/28/06 7:43 PM Page 59

Picture Control English - 60 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † button to select “M...

1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † button to select “Mode”, then press the ENTER button.Press the … or † button again to select “Mode”, then press the ENTER button. 3 Press the … or † button to select the desired pict...

Picture Control English - 62 5 Press the ENTER button to return to “Mode”.Press the … or † button to select “Color Tone”, then press the ENTER button. 6 Press the … or † button to select a particular item (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. 7 To return the factory d...

English - 63 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button.Press the … or † button to select “Size”, then press the ENTER button. 2 Press...

Picture Control English - 64 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the œ or √ button to select “Picture”, t...

Picture Control English - 66 Setting the My Color Control Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky,and grass tones using the predefined settings (Red, Green, Blue, Yellow, Pink, Standard, and Custom)without affecting other colors on the s...

English - 67 My Color Control Custom Settings Users can adjust the 5 My Color Control colors (Red, Green, Blue, Yellow, and Pink). 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † button to select “My Color Control”, then press the...

Picture Control English - 68 Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to compensate for the user’s particular color weakness. 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † butt...

English - 69 Setting the Film Mode You can automatically sense and process film signals and adjust the picture for optimum quality. 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † button to select “Film Mode”, then press the ENTER...

Picture Control English - 70 Viewing Picture-In-Picture One of the best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP systemallows you to watch two different pictures at once, even if you don’t have a VCR or DVD connectedto your TV. Activating the PIP 1 Press the MENU...

English - 71 Swapping the Sub (PIP) Picture and Main Picture 1 Press the MENU button.Press the œ or √ button to select “PIP”, then press the ENTER button. 2 Press the … or † button to select “Swap”, then press the ENTER button.The sub picture appears in the mainpicture, and vice versa. Select “Retur...

Picture Control English - 72 Changing the Size of the Sub (PIP) Picture 1 Press the MENU button.Press the œ or √ button to select “PIP”, then press the ENTER button. 2 Press the … or † button to select “Size”, then press the ENTER button. Press the … or † button to select a size you want, then press...

English - 73 Changing the Location of the Sub (PIP) Picture 1 Press the MENU button.Press the œ or √ button to select “PIP”, then press the ENTER button. 2 Press the … or † button to select “Position”, then press the ENTER button. Press the … or † button to select a position you want, then press the...

Picture Control English - 74 Selecting a Signal Source (Air or Cable) for PIP If the PIP source is TV while PIP is On, you can select a different broadcasting source for the PIP picture from the main picture. 1 Press the MENU button.Press the œ or √ button to select “PIP”, then press the ENTER butto...

English - 75 Changing the Channel of the Sub (PIP) Picture After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels. 1 Press the MENU button.Press the œ or √ button to select “PIP”, then press the ENTER button. 2 Press the … or † button to select “Channel”...

Picture Control English - 76 Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound willstill be heard.) To cancel this function, press the STILL button again or press anybutton on the remote control. NOTE • In the PIP mode, the main and sub pictures are stilled at the...

English - 77 Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”. 1 Press the MENU button. Press the œ...

Picture Control English - 78 Setting the Color Gamut You can choose your favorite color gamut. Color gamut means a color matrix made up with the basiccolors of Red, Green and Blue. 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † b...

Sound Control BP68-00587A-00Eng(060~079) 4/28/06 7:41 PM Page 79

Sound Control English - 80 Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– button to increase or decrease the volume. Using the MUTE Button At any time, you can temporarilycut off the sound.Press...

English - 81 Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use oneof the automatic settings. See previous page.) 1 Press the MENU button. Press the œ or √ button to select “Sound”, then press the ENTER button. 2 Press the … or † bu...

Sound Control English - 82 Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannelcontent over two speakers. Trusurround delivers a compelling, virtual surround sound experiencethrough any two-speaker playback system, including internal te...

Sound Control English - 86 Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can setInternal Mute to On to cut off sound from the TV's internal speakers. 1 Press the MENU button. Press the œ or √ button to select “Sound”, then press the E...

English - 87 Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. 1 Press the MENU button. Press the œ or √ button to select “Sound”, then press the ENTER button. 2 Press the … or † button to select “Melody”, then press the ENTERbutton.Press the … or † but...

Special Features BP68-00587A-00Eng(080~089) 4/28/06 7:40 PM Page 89

Special Features English - 90 Setting the Function Help Displays Help on the menu functions. The Help appears at the top of the screen. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Function Help”, then press theE...

English - 91 Menu Transparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Menu Transparency”, then pressthe ENTER button.Press the … or † button to select a le...

Special Features English - 92 Using Game Mode When connecting to a game console such as PlayStation TM or Xbox TM , you can enjoy a more realistic gaming experience by selecting the Game Mode to On. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Pre...

English - 93 Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that isdefined by the user). The on-screen menu will instruct you to assign a password (you can change itlater, if necessary). How to Change Your Password 1 Press the MENU button.Pr...

Special Features English - 94 How to Enable/Disable the Rating Controls 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Press the † button. Press the number buttons to enteryour ...

English - 95 How to Set up Restrictions Using “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or“MPAA Rating”. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † bu...

English - 97 How to Set up Restrictions Using “MPAA Rating” The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and itsmain application is for movies.When the rating control is on, the TV will automatically block any programs that are coded withobjectionable ratin...

Special Features English - 98 Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-Y All children. The themes and elements in thisprogram are specifically designed for a veryyoung audience, including children from agestwo to six. TV-...

English - 99 How to Set up Restrictions Using Canadian English 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Press the † button. Press the number buttons to enteryour current 4...

Special Features English - 100 4 Press the … or † button to select a appropriate restriction. Press the ENTER button to activate the restriction selected.The “ ” symbol is indicated.To unlock items that are locked, press the ENTER button again. Select “Return” by pressing the … or † button, then pre...

English - 101 How to Set up Restrictions Using Canadian French 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Press the † button. Press the number buttons to enteryour current 4...

English - 103 Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Pres...

English - 109 Using a CableCARD This menu works with a CableCARD provided by a local cable service provider.Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV.For detailed connection instructions, refer to the “Connecting CableCARD” section on page 22 of thisma...

Special Features English - 110 Using the CableCARD Setup Function Sets up relevant CableCARD options. CableCARD Reset Resets CableCARD when the channels provided by CableCARD are not available. 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press t...

English - 113 Using TV Guide On Screen TM Setup 1 If you want to set up the TV Guide On Screen TM now, select “Set up TV Guide On Screen now“. For more information, referto INITIAL GUIDE SETUP in the TV Guide Manual. 2 If you want to set up TV Guide On Screen TM later and want the reminder screen to...

Using the D-Net English - 116 How to connect compatible IEEE1394 Devices Connecting compatible IEEE1394 devices is simple using this TV equipped with IEEE1394. A secure digital interface is provided to other digital home entertainment units, such as a DTV, a Set-Top Box, an AVHDD, a digital VCR, a M...

Using the D-Net English - 118 Connection Options There are two different connection options for connecting D-Net (IEEE1394) compatible devices. Select the most suitable option according to your network of audio/video products. The Direct Device-To-Device Option D-Net (IEEE1394) permits the chaining ...

Using the D-Net English - 120 Selecting a D-Net device Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List. 1 Connect the relevant D-Net (IEEE1394) Compatible device in the list.(See “How to connect compatible IEEE1394 Devices” on page 116) 2 Press the D-Net b...

English - 121 Follow the instructions below to activate D-Net in the menu. 1 Press the MENU button. Press the œ or √ button to select “Application”, then press the ENTER button. 2 Press the … or † button to select “D-Net”, then press the ENTER button. 3 Press the … or † button to select a D-Net (IEE...

Using the D-Net English - 122 The D-Net control panel Select an IEEE1394 device from the D-Net device list. The TV will then display the D-Net control panel.This panel allows you to use the TV remote control to control the selected IEEE1394 device. 1 Press the D-Net button on the remote control. 2 P...

Using the D-Net English - 124 Operating Tips 1) When the screen is switched to the TV program. - When you select the first button, the TV button, in the Device List, it switches to the TV program. - Although you have selected another device from the Device List, if detecting a video signal from the ...

English - 125 10) When multiple devices are connected, some devices may appear and then disappear periodically in the Device List. This is because some devices malfunction when multiple devices are connected. If this occurs, you have to discover and remove the defective device from the connection by...

Using the D-Net English - 126 Recording Tips 1) Recording using the Target List while also watching the screen being recorded. - Check that the AVHDD and DVHS devices are connected. - Select a source device to be recorded and press the Target button in the menu. (Target button : The Target button is...

English - 127 Continued... Possible Solution Only DTVs, STBs, AVHDDs, DVHSs and MPEG camcorder IEEE 1394 devices are controllable.Other devices will display “UNCONTROLLABLE” inthe device list. Some supported devices may display as“UNCONTROLLABLE” due to an initialization error. ➔ If a device is supp...

PC Display BP68-00587A-00Eng(130~141) 4/28/06 7:37 PM Page 131

PC Display English - 132 Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. Connecting a PC (15p D-SUB) to the TV 1 Connect a PC cable between the...

English - 133 Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. But the actual screens on yourPC will probably be different, depending upon your particular version of Windows and your particularvideo card. But even if your actual s...

PC Display English - 134 Checklist Before Connecting to a PC • Adjust the PC Display Setup to the resolution and frequency values that are supported by the TV.• Please read the user’s manual provided with the PC (Graphic Card & Sound Card).• Do not supply power to either device until all connect...

English - 135 Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is notremoved by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.After the noise has been reduced, re-adjust the picture so ...

PC Display English - 136 Changing the Picture Position After connecting the TV to your PC, adjust the position of the picture if it is not well-aligned. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press t...

1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press the … or † button to select “PC”, then press the ENTER button. 4 Press the … or † button to select “Auto Adjustment”, then press theENTER button.The pictu...

English - 139 Viewing the Current Resolution You can get the resolution information of your PC. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press the … or † button to select “PC”, then press the ENTER but...

PC Display English - 140 Initializing the Picture Settings You can replace all picture settings with the factory default values. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press the … or † button to sele...

WISELINK English - 142 Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USBMass Storage Class (MSC) device. Press the power button on theremote control or front panel. Connect a USB device containingJPEG and/or MP3 files to the...

English - 143 1 Press the MENU button. Press the œ or √ button to select “Application”, thenpress the ENTER button. 2 Press the … or † button to select “WISELINK”, thenpress the ENTER button. 3 Press the … or † button to select the correspondingMSC Memory Device, thenpress the ENTER button. A menu f...

English - 145 Selecting a Photo and Slide Show 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 143) 2 Press the œ or √ button to move to “Photo”, then pressthe ENTER button. The saved file information isdisplayed as a folder or file. 3 Press the INFO button todisplay “View” or “Sli...

WISELINK English - 146 5 Press the INFO button during “SlideShow” to set the option(Slide ShowSpeed, Background Music On/Off,Background Music Setting, List). Press the … or † button to select the option, then press the ENTER button. 6 To change the sub option, press the INFObutton again to open the ...

English - 147 (Photo) SlideShow Photo SlideShow is in progress. When the SlideShow and musicis paused by the PLAY/PAUSEbutton on the remote controlduring a SlideShow.To resume the SlideShow, pressthe PLAY/PAUSE button on theremote control again. When pressing the VOL +, -buttons on the remote contro...

WISELINK English - 148 Rotating 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 143) 2 Press the œ or √ button to move to “Photo”, then pressthe ENTER button. The saved file information isdisplayed as a folder or file. 3 Press the … , † , œ and √ buttons to select a file, thenpress...

WISELINK English - 150 Zoom (x 2) Zoom-in to a photo x2. Zoom-in to a photo x4. Current OSD Icon Zoom (x 4) Restore a photo to its original size. Zoom (x 1) Pan down to view the lower part of a zoomed-in photo. Pan Down Function Pan up to view the upper part of a zoomed-in photo. Pan Up Pan right to...

English - 151 Using the MP3 List This menu shows MP3 files from among the files saved on an MSC memory device. 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 143) 2 Press the œ or √ button to move to “Music”, then pressthe ENTER button. The saved file information isdisplayed as a ...

WISELINK English - 152 4 Press the PLAY/PAUSE button whileplaying an MP3 file to pause the file.Press the STOP button to exit Play mode. To exit WISELINK mode, press theWISE LINK button on the remote control. NOTES • This menu only shows files with the mp3 file extension. Files with other file exten...

English - 153 Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 143) 2 Press the œ or √ button to move to “Setup”, then pressthe ENTER button. 3 Press the … or † button to select an item you want, thenpress t...

Appendix BP68-00587A-00Eng(142~159) 4/28/06 7:36 PM Page 155

Appendix English - 156 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of thesetroubleshooting tips apply, then call your nearest Samsung authorized service center. Possible Solution Try another channel.Adjust the antenna.Check all w...

Appendix English - 158 Cleaning and Maintaining Your TV Please follow these guidelines to get the maximum performance from your TV. Placement • Do not put the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near appliances with electric motors that create magnetic fields, su...

Specifications Model Dimensions (W x D x H) Weight TV System Channel Component Video IN HDMI IN PC IN Speaker Output Voltage Frequency of Operation Power Consumption D-sub 15-pin, analog RGB 10W(L), 10W(R) AC110-120V 60Hz 230W NTSC 8VSB (terrestrial) QAM (cable) Terrestrial (analog) Cable TV (analog...

BP68-00587A-00 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country CANADA U.S.A Customer Care Center 1-800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864) Web Site www.samsung.com/ca www.samsung.com Address...