Samsung HL-S5087W - Manuals

Your New Wide TV BP68-00588A-03Eng(002~015) 8/22/06 5:15 PM Page 7

Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. Your New Wide TV English - 8 When installing the product, make sure to keepit away from the wall (more t...

Your New Wide TV English - 10 Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. The product color and shape may vary depending on the model. Indicator Light Key : Light is On : Light is Blinking : Light is Off Remote Control Sensor Aim the remote control ...

English - 11 Side Panel Jacks Use the right side panel jacks to connect a component that is used only occasionally (a camcorder orvideo game, for example). The product color and shape may vary depending on the model. Connect the video signal from a camcorder or video game. Connect the audio signal f...

Your New Wide TV English - 12 Rear Panel Jacks Œ VIDEO/AUDIO INPUT jacks Connect video/audio signals from external sources, such as VCRor DVD players. (Refer to pages 19, 20, and 24) ´ S-VIDEO INPUT jacks Connects an S-Video signal from an S-VHS VCR or DVD player. (Refer to pages 19, 20, and 24) ˇ V...

English - 13 Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player and Set-top box. See pages 34~40 for details. 1. POWER Turns ...

Your New Wide TV English - 14 Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performancedegradation while using the remote, the batteries may need to be replaced. Make sure you replace bothbatteries and do not...

Connections BP68-00588A-03Eng(002~015) 8/22/06 5:15 PM Page 15

Connections English - 16 Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead intothe ANT 2 IN (AIR) on the rear panel of...

English - 17 Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable intothe ANT 1 IN (CABLE) on therear panel of your TV. Cable ...

Connections English - 18 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxialcables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect thecable ...

English - 19 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack 1 Connect a video cablebetween the VIDEO IN (1 or 2) (or S-VIDEO IN 1 or 2)jack on the TV and theVIDEO (or S-VIDEO) outputjack on the VCR. 2 Connect a set of audio cables between the AUDIOIN (1 or 2) jacks on the TVand...

Connections English - 20 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV.You can use your camcorder to view tapes without using a VCR. 1 Locate the A/V output jackson the camcorder. They areusually found on the side orback of the camcorder. 2 Con...

English - 21 Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to HDMI (High Definition Multimedia Interface) 1 Connect an HDMI cablebetween the HDMI IN 2 (orHDMI IN 1/DVI IN) jack onthe TV and the HDMI OUT jackon the Set-Top Box. Con...

Connections English - 22 Connecting to Audio and Video Jacks 1 Connect a video cable between the VIDEO IN (1or 2) jack on the TV and theVIDEO OUT jack on the DVD player. 2 Connect a set of audiocables between the AUDIOIN (1 or 2) jacks on the TVand the AUDIO OUT jackson the DVD player. NOTES • Compo...

English - 23 Connecting a DTV Set-Top Box Connecting to Y, P B , P R 1 Connect a set of Componentcables between the COMPONENT (1 or 2) VIDEO(Y, P B , P R ) IN jacks on the TV and VIDEO (Y/P B /P R or Y/C B /C R ) OUT jacks on the Set-Top Box. 2 Connect a set of audio cablesbetween the COMPONENT (1 o...

Connections English - 24 Connecting a VCR and DTV Set-Top Box 1 Connect the Video or S-Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. 2 Connect the Video/Audiocables between the VIDEO or S-VIDEO/AUDIO inputjacks on the ...

English - 25 Connecting a Digital Audio System There are many types of digital audio systems on the market today.A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. 1 If your audio system has anoptical digital audio input,connect t...

Connections English - 26 Connecting to an Analog Amplifier 1 The “AV OUT (AUDIO L/R)”terminals cannot be used for external speakers. You must hook them up to anamplifier. When an audio amplifier is connected to the “AV OUT (AUDIO L/R)” terminals: Decrease the gain (volume) of the TV, and adjust thev...

Operation BP68-00588A-01Eng(016~027) 5/8/06 4:48 PM Page 27

Turning the TV On and Off Press the POWER button on the remote control.You can also use the POWER button on the front panel. Dynamic Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on t...

English - 29 Navigating Menus by Using the Menu Map Using the Menu Map of the main menu enables you to view all menus and select a function quickly. You can select any menu by using the menu map. 1 Press the MENU button.The main menu will appear at the bottom of the screen. 2 Press the œ or √ button...

English - 30 Operation Selecting a Menu Language When you start using your television for the first time, you must select the language which willbe used for displaying menus and indications. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the …...

English - 31 Memorizing Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cablechannels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering th...

English - 33 Changing Channels Using the Channel Buttons When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.)You will not see channels that were either erased or not mem...

Operation English - 34 Customizing Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, VCR,Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you toswitch between these modes, and control whicheve...

English - 35 Setting Up the Remote to Operate Your Cable Box 1 Turn off your cable box. 2 Press the CABLE button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the cable box code listed on page ...

English - 36 Operation Setting Up the Remote to Operate Your DVD 1 Turn off your DVD. 2 Press the DVD button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the DVD code listed on page 40 of this...

English - 37 Setting Up the Remote to Operate Your Set Top Box 1 Turn off your STB. 2 Press the STB button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the STB code listed on page 39 of this m...

Operation English - 38 Remote Control Codes continued... VCR Brand SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO LG(Goldstar) HARMAN KARDON H...

English - 39 continued... CABLE BOX Brand SAMSUNGGIHAMLINHITACHIJERROLDMACOMMAGNAVOXOAKPANASONICPHILIPSPIONEERRCAREGAL Code 000 001 002 003 004 005 006 007041003 024 031025 030038 039025 030019 023 028026003 022 027 037 044019 021 023 028004 018 020 044014 022 040003 Brand REGENCYSASCIENTIFIC ATLANS...

Operation English - 40 SAMSUNG DVD Product DVDDVDRBD RecordVCR COMBOVCR RecordDHR COMBO Code 000 001 002003 004005 006007 008 009 010 011 012013 Product Home Theater VCR COMBOHDD Record COMBOTWIN TRAY COMBOSTB DVD COMBODVD ReceiverAV Receiver Code 014 015 016017018019020021 DVD Code 030075085072070 ...

English - 41 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV.Also, you can check the time while watching the TV. (Just press the INFO button.) 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press...

Operation English - 42 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Clock”, then press the ENTE...

English - 43 Setting the On/Off Timer 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Timer”, then press the ENTER button.Press the … or † button to select “On Timer”, then press the ENTERbutton.Press the … or † bu...

English - 44 Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Timer”, then press the ENT...

English - 45 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment,such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select“Input”. 2 Press ...

English - 46 Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. 1 Press the MENU button. Press the ENTER button to select“Input”. 2 Press the … or † button to select “Edit Name”, then press the ENTERbutton. 3 Press the … or † button...

Channel Control BP68-00588A-03Eng(028~055) 8/22/06 5:14 PM Page 47

Channel Control English - 48 Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV).This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button onthe remote control. Preset : To use the Chan...

English - 49 Viewing the Channel Lists You can display a list of all channels, added channels, or your favorite channels. Preset : To use the Channel Manager function, first run Auto Program (see pages 31~32). 1 Press the MENU button.Press the œ or √ button to select “Channel”, then press the ENTERb...

English - 50 Adding and Erasing Channels Preset : To use the Channel Manager function, first run Auto Program (See pages 31~32). 1 Press the MENU button.Press the œ or √ button to select “Channel”, then press the ENTERbutton. 2 Press the … or † button to select “Channel Manager”, then press theENTER...

English - 51 Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or ablank. When the INFO button is pressed, the channel label will appear. 1 P...

English - 52 Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the œ or √ button to select “Channel”, then press the ENTER button. 2 Press the … or † button to select “Fine Tune”, then press the E...

English - 53 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.Y...

Picture Control BP68-00588A-03Eng(028~055) 8/22/06 5:14 PM Page 55

Picture Control English - 56 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † button to select “M...

1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † button to select “Mode”, then press the ENTER button.Press the … or † button again to select “Mode”, then press theENTER button. 3 Press the … or † button to select the desired pictu...

Picture Control English - 58 5 Press the ENTER button to return to “Mode”.Press the … or † button to select “Color Tone”, then press the ENTER button. 6 Press the … or † button to select a particular item (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. 7 To return the factory d...

English - 59 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button.Press the … or † button to select “Size”, then press the ENTER button. 2 Press...

Picture Control English - 60 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the œ or √ button to select “Picture”, t...

Picture Control English - 62 Setting the My Color Control Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky,and grass tones using the predefined settings (Red, Green, Blue, Yellow, Pink, Standard, and Custom)without affecting other colors on the s...

Picture Control English - 64 Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to compensate for the user’s particular color weakness. 1 Press the MENU button. Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † butt...

English - 65 Setting the Film Mode You can automatically sense and process film signals and adjust the picture for optimum quality. 1 Press the MENU button. Press the œ or √ button to select “Picture”, then press the ENTER button. 2 Press the … or † button to select “Film Mode”, then press the ENTER...

Picture Control English - 66 Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound willstill be heard.) To cancel this function, press the STILL button again or press anybutton on the remote control. BP68-00588A-03Eng(056~069) 8/22/06 5:15 PM Page 66

English - 67 Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”. 1 Press the MENU button. Press the œ...

Sound Control BP68-00588A-03Eng(056~069) 8/22/06 5:15 PM Page 69

Sound Control English - 70 Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– button to increase or decrease the volume. Using the MUTE Button At any time, you can temporarilycut off the sound.Press...

Sound Control English - 72 Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannelcontent over two speakers. Trusurround delivers a compelling, virtual surround sound experiencethrough any two-speaker playback system, including internal te...

Sound Control English - 76 Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can setInternal Mute to On to cut off sound from the TV's internal speakers. 1 Press the MENU button. Press the œ or √ button to select “Sound”, then press the E...

English - 77 Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. 1 Press the MENU button. Press the œ or √ button to select “Sound”, then press the ENTER button. 2 Press the … or † button to select “Melody”, then press the ENTERbutton.Press the … or † but...

Special Features BP68-00588A-01Eng(070~079) 5/8/06 4:49 PM Page 79

Special Features English - 80 Setting the Function Help Displays Help on the menu functions. The Help appears at the top of the screen. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Function Help”, then press theE...

English - 81 Menu Transparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Menu Transparency”, then pressthe ENTER button.Press the … or † button to select leve...

Special Features English - 82 Using Game Mode When connecting to a game console such as PlayStation TM or Xbox TM , you can enjoy a more realistic gaming experience by setting the game mode to on. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 2 Press...

English - 83 Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that isdefined by the user). The on-screen menu will instruct you to assign a password (you can change itlater, if necessary). How to Change Your Password 1 Press the MENU button.Pr...

Special Features English - 84 How to Enable/Disable the Rating Controls 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Press the † button. Press the number buttons to enteryour ...

English - 85 How to Set up Restrictions Using “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or“MPAA Rating”. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † bu...

English - 87 How to Set up Restrictions Using “MPAA Rating” The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and itsmain application is for movies.When the rating control is on, the TV will automatically block any programs that are coded withobjectionable ratin...

Special Features English - 88 Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-MA Mature audiences only. This program may contain mature themes, profane language,graphic violence and explicit sexual content. TV-14 Parents strongl...

English - 89 How to Set up Restrictions Using Canadian English 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Press the † button. Press the number buttons to enteryour current 4...

English - 91 How to Set up Restrictions Using Canadian French 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Press the † button. Press the number buttons to enteryour current 4-...

English - 93 Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then press the ENTER button. 2 Press...

PC Display BP68-00588A-03Eng(080~099) 8/22/06 5:13 PM Page 99

PC Display English - 100 Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. Connecting a PC (15p D-SUB) to the TV 1 Connect a PC cable between the...

English - 101 Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. But the actual screens on yourPC will probably be different, depending upon your particular version of Windows and your particularvideo card. But even if your actual s...

PC Display English - 102 NOTES • The Modes Table conforms to the regulations of IBM/VESA and is prepared based on analog input standards. • Resolutions other than the resolutions above are not supported in PC mode. Resolution 640 x 350640 x 480640 x 480 800 x 600 1024 x 768 1152 x 8641280 x 960 1280...

English - 103 Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is notremoved by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.After the noise has been reduced, re-adjust the picture so ...

PC Display English - 104 Changing the Picture Position After connecting the TV to your PC, adjust the position of the picture if it is not well-aligned. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press t...

1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press the … or † button to select “PC”, then press the ENTER button. 4 Press the … or † button to select “Auto Adjustment”, then press theENTER button.The pictu...

English - 107 Viewing the Current Resolution You can get the resolution information of your PC. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press the … or † button to select “PC”, then press the ENTER but...

PC Display English - 108 Initializing the Picture Settings You can replace all picture settings with the factory default values. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the œ or √ button to select “Setup”, then press the ENTER button. 3 Press the … or † button to sele...

WISELINK BP68-00588A-03Eng(100~109) 8/22/06 5:13 PM Page 109

WISELINK English - 110 Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio files (MP3)saved on a USBMass Storage Class (MSC) device. Press the power button on theremote control or front panel. Connect a USB device containingJPEG and/or MP3 files to theW...

English - 111 1 Press the MENU button. Press the œ or √ button to select “Application”, thenpress the ENTER button. 2 Press the … or † button to select “WISELINK”, thenpress the ENTER button. 3 Press the … or † button to select the correspondingMSC Memory Device, thenpress the ENTER button. A menu f...

English - 113 Selecting a Photo and Slide Show 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 111) 2 Press the œ or √ button to move to “Photo”, then pressthe ENTER button. The saved file information isdisplayed as a folder or file. 3 Press the INFO button todisplay “View” or “Sli...

WISELINK English - 114 5 Press the INFO button during “SlideShow” to set the option(Slide ShowSpeed, Background Music On/Off,Background Music Setting, List). Press the … or † button to select the option, then press the ENTER button. 6 To change the sub option, press the INFObutton again to open the ...

English - 115 (Photo) SlideShow Photo SlideShow is in progress. When the SlideShow and musicis paused by the PLAY/PAUSEbutton on the remote controlduring a SlideShow.To resume the SlideShow, pressthe PLAY/PAUSE button on theremote control again. When pressing the VOL +, -buttons on the remote contro...

WISELINK English - 116 Rotating 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 111) 2 Press the œ or √ button to move to “Photo”, then pressthe ENTER button. The saved file information isdisplayed as a folder or file. 3 Press the … , † , œ and √ buttons to select a file, thenpress...

WISELINK English - 118 Zoom (x 2) Zoom-in to a photo x2. Zoom-in to a photo x4. Current OSD Icon Zoom (x 4) Restore a photo to its original size. Zoom (x 1) Pan down to view the lower part of a zoomed-in photo. Pan Down Function Pan up to view the upper part of a zoomed-in photo. Pan Up Pan right to...

English - 119 Using the MP3 List This menu shows MP3 files from among the files saved on an MSC memory device. 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 111) 2 Press the œ or √ button to move to “Music”, then pressthe ENTER button. The saved file information isdisplayed as a ...

WISELINK English - 120 4 Press the PLAY/PAUSE button whileplaying an MP3 file to pause the file.Press the STOP button to exit Play mode. To exit WISELINK mode, press theWISELINK button on the remote control. NOTES • This menu only shows files with the mp3 file extension. Files with other file extens...

English - 121 Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 111) 2 Press the œ or √ button to move to “Setup”, then pressthe ENTER button. 3 Press the … or † button to select an item you want, thenpress t...

Appendix BP68-00588A-01Eng(110~131) 5/8/06 4:51 PM Page 123

Appendix English - 124 Replacing the Lamp • Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new. • When do I need to replace...

Appendix English - 126 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of thesetroubleshooting tips apply, then call your nearest Samsung authorized service center. Possible Solution Try another channel.Adjust the antenna.Check all w...

Possible Solution The best visual quality is obtained with 1080p inputsignal. ➔ To view TV in the best 1080p visual quality, connect to a PC whose graphic output is1920 x 1080. The visual qualities of digital channels may varydepending on the original production method (analogor digital). ➔ If the o...

Appendix English - 128 Cleaning and Maintaining Your TV Please follow these guidelines to get the maximum performance from your TV. Placement • Do not put the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near appliances with electric motors that create magnetic fields, su...

English - 129 Specifications Model Dimensions (W x D x H) Weight TV System Channel Component Video IN HDMI IN PC IN Speaker Output Voltage Frequency of Operation Power Consumption D-sub 15-pin, analog RGB 10W(L), 10W(R) AC110-120V 60Hz 230W In Use, Less than 1W In Standby NTSC ATSC (8VSB terrestrial...

This page is intentionally left blank. BP68-00588A-01Eng(110~131) 5/8/06 4:51 PM Page 130

BP68-00588A-06 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country CANADA U.S.A Customer Care Center 1-800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864) Web Site www.samsung.com/ca www.samsung.com Address...