Samsung HL-S4266W - Manuals

Your New Wide TV BP68-00586D-01Eng(002~015) 3/16/06 4:17 PM Page 7

Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. Your New Wide TV English - 8 When installing the product, make sure to keepit away from the wall (more t...

Your New Wide TV English - 10 Right side buttons The buttons on the right side panel control your TV’s basic features, including the on-screen menu system.To use the more advanced features, you must use the remote control.The product color and shape may vary depending on the model. Press to switch b...

English - 11 Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. The product color and shape may vary depending on the model. Indicator Light Key TIMER Standby state. The picture will automatically appear in about 15 seconds.Auto Timer ON/OFF has been set a...

Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect different componentssuch as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks andtwo sets of component video input jacks on the rear panel of your TV. For more inform...

English - 13 Remote Control You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the leftand right sides of the TV’s remote control receiver. You can also use your remote control to operate yourVCR, Cable box, DVD player and Set-top box. See pages 38~40 for de...

Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performancedegradation while using the remote, the batteries may need to be replaced. Make sure you replace bothbatteries and do not mix old and new batteries in ...

Connections BP68-00586D-01Eng(002~015) 3/16/06 4:17 PM Page 15

Connections English - 16 Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead intothe ANT 2 IN (AIR) on the rear panel of...

English - 17 Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable intothe ANT 1 IN (CABLE) on therear panel of your TV. Cable ...

Connections English - 18 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxialcables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect thecable ...

Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack 1 Connect a video cablebetween the VIDEO IN (1 or 2) (or S-VIDEO IN) jackon the TV and the VIDEO (orS-VIDEO) output jack on theVCR. 2 Connect a set of audiocables between the AUDIOIN (1 or 2) jacks on the TVand the AUDIO output jac...

Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV.You can use your camcorder to view tapes without using a VCR. 1 Locate the A/V output jackson the camcorder. They areusually found on the side orback of the camcorder. 2 Connect a set of audio cable...

Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y, P B , P R 1 Connect a set of audiocables between the COMPONENT (1 or 2)AUDIO (L, R) IN jacks on the TV and the AUDIO OUTjacks on the DVD player. 2 To enable Component videoviewin...

Connecting a DTV Set-Top Box Connecting to Y, P B , P R 1 Connect a set of audiocables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. 2 Connect a set of videocables between the COMPONENT (1 or 2) VIDEO (Y, P B , P R ) IN jacks on the TV and...

English - 23 Connecting to DVI (Digital Visual Interface) 1 Connect a set of audiocables between the DVIAUDIO (L, R) IN jacks on theTV and the AUDIO OUTjacks on the Set-Top Box. 2 Connect an HDMI/DVI cablebetween the HDMI 2/DVI INjack on the TV and the DVIOUT jack on the Set-Top Box. NOTES • Make su...

Connecting to an Analog Amplifier 1 The AV OUT (AUDIO L/R)terminals cannot be used for external speakers. You must hook them up to anamplifier. When an audio amplifier is connected to the AV OUT (AUDIO L/R) terminals: Decrease the gain (volume) of the TV, and adjust thevolume level with the volumeco...

Operation BP68-00586D-01Eng(016~025) 3/16/06 4:18 PM Page 25

Turning the TV On and Off Press the POWER button on the remote control.You can also use the POWER button on the front panel. Plug & Play Feature When the TV is initially powered On, basic customer settings proceed automatically and subsequently:Setting the language, checking the antenna input, m...

Option 1: Setting the Clock Automatically If you set “Clock Mode” to “Auto” in step 6, follow the instructions below. 7 Press the ENTER button to select“DST”(Daylight Saving Time).Press the … or † button to select “Off” or “On”, then press the ENTER button. 8 Press the … or † button to select time z...

English - 29 Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, usethe … / † / œ / √ /ENTER buttons on your remote contr...

English - 30 Operation Selecting a Menu Language 1 Press the MENU button. Press the … or † button to select “Setup”, then press theENTER button. 2 Press the ENTER button toselect “Language”.Press the … or † button to select “English”, “Español” or “Français”, then press theENTER button. Press the EX...

English - 31 Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by enteri...

English - 33 Changing Channels Using the Channel Buttons When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.)You will not see channels that were either erased or not mem...

Operation English - 34 Customizing Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, VCR,Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you toswitch between these modes, and control whicheve...

English - 35 Setting Up the Remote to Operate Your Cable Box 1 Turn off your cable box. 2 Press the CABLE button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the cable box code listed on page ...

Operation English - 36 Setting Up the Remote to Operate Your DVD 1 Turn off your DVD. 2 Press the DVD button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the DVD code listed on page 40 of this...

English - 37 Setting Up the Remote to Operate Your Set Top Box 1 Turn off your STB. 2 Press the STB button on your TV’s remote control. 3 Press the SET button on your TV's remote control. 4 Using the number buttons on your remote control, enter threedigits of the STB code listed on page 39 of this m...

Operation English - 38 Remote Control Codes continued... VCR Brand SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO LG(Goldstar) HARMAN KARDON H...

English - 39 Remote Control Codes continued... CABLE BOX Brand SAMSUNGGIHAMLINHITACHIJERROLDMACOMMAGNAVOXOAKPANASONICPHILIPSPIONEERRCAREGAL Code 000 001 002 003 004 005 006 007041003 024 031025 030038 039025 030019 023 028026003 022 027 037 044019 021 023 028004 018 020 044014 022 040003 Brand REGEN...

Operation English - 40 Remote Control Codes SAMSUNG DVD Product DVDDVDRBD RecordVCR COMBOVCR RecordDHR COMBO Code 000 001 002003 004005 006007 008 009 010 011 012013 Product Home Theater VCR COMBOHDD Record COMBOTWIN TRAY COMBOSTB DVD COMBODVD ReceiverAV Receiver Code 014 015 016017018019020021 DVD ...

English - 41 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 1 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. 2 Pre...

English - 42 Operation Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Time”, then press the ENTER...

English - 43 Setting the On/Off Timer 1 Press the MENU button. Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Press the … or † button to select “Time”, then press theENTER button.Press the … or † button to select “On Timer”, thenpress the ENTER button.Press the … or † butto...

English - 44 Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180minutes). 1 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Time”, then press theENTER ...

English - 45 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment,such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button toselect “Input”. 2 Press ...

English - 46 Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. 1 Press the MENU button. Press the ENTER button toselect “Input”. 2 Press the … or † button to select “Edit Name”, thenpress the ENTER button. 3 Press the … or † button...

Channel Control BP68-00586D-01Eng(026~047) 3/16/06 4:20 PM Page 47

English - 48 To Store Your Favorite Channels: 1 Press the MENU button. Press the … or † button to select “Channel”, then pressthe ENTER button. 2 Press the … or † button to select “Channel Manager”,then press the ENTER button. 3 Press the ▲ or ▼ button to select “All” or “Added”, then press the ENTE...

English - 49 To View Your Favorite Channels list: 1 Press the MENU button. Press the … or † button to select “Channel”, then pressthe ENTER button. 2 Press the … or † button to select “Channel Manager”,then press the ENTER button. 3 Press the … or † button to select“Favorite”, then pressthe ENTER bu...

English - 50 Channel Control Viewing the Channel Lists You can display a list of all channels or your favorite channels. Preset : To use the Channel Manager function, first run Auto Program (see page 31). 1 Press the MENU button. Press the … or † button to select “Channel”, then pressthe ENTER butto...

English - 51 Editing the Channel Lists You can edit channels to be added or deleted. Preset : To use the Channel Manager function, first run Auto Program (see page 31). 1 Press the MENU button. Press the … or † button to select “Channel”, then pressthe ENTER button. 2 Press the … or † button to sele...

English - 54 Channel Control Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or ablank. When the INFO button is pressed, the channel label ...

English - 55 Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the … or † button to select “Channel”, then pressthe ENTER button. 2 Press the … or † button to select “Fine Tune”, then pressthe ENTER button. 3 Pre...

English - 56 Channel Control Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a d...

Picture Control BP68-00586D-01Eng(048~059) 3/16/06 4:21 PM Page 59

Picture Control English - 60 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the ENTER buttonagain to select ...

English - 61 1 Press the MENU button. Press the … or † button to select “Picture”, then press theENTER button. 2 Press the ENTER button toselect “Mode”. 3 Press the ENTER button. Press the … or † button to select the desired picture mode(Dynamic, Standard, Movie,Custom), then press the ENTERbutton. ...

Picture Control English - 62 5 Press the ENTER button to return to“Mode”.Press the … or † button to select “Color Tone”, then press the ENTERbutton. 6 Press the … or † button to select a particular option (Cool2, Cool1, Normal,Warm1, or Warm2), then press theENTER button. 7 To return the factory def...

English - 63 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button.Press the … or † button to select “Size”, then press theENTER button. 2 Press th...

Picture Control English - 64 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button.Press the … or † button to select “Picture”, th...

English - 65 Viewing the DNIe Demonstration This TV includes the DNIe function so as to provide a high visual quality.If you set DNIe Demo to On, you can view the applied DNIe and normal pictures on the screen for demonstration purposes. Using this function, you can view the difference in visual qua...

Picture Control English - 66 Setting the My Color Control Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky,and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”)without affecting other colors on the scre...

Picture Control English - 68 Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to enhance the picture according to the user’s particular color weakness. 1 Press the MENU button.Press the … or † button to select “Setup”, then press the ENTER button. 2 Pres...

English - 69 Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the … or † button to select “Film Mode”, thenp...

Picture Control English - 70 Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound willstill be heard.) To cancel this function, press the STILL button again or press anybutton on the remote control. BP68-00586D-01Eng(060~073) 3/16/06 4:22 PM Page 70

English - 71 Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces thenoisy picture background. If you wish to continue viewing the poor picture, you must set the “BlueScreen” mode to “Off”. 1 Press the MENU button.Press the … or...

Sound Control BP68-00586D-01Eng(060~073) 3/16/06 4:22 PM Page 73

Sound Control English - 74 Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– button to increase or decrease the volume. Using the MUTE Button At any time, you can temporarilycut off the sound.Press...

English - 75 3 Press the œ or √ button to select a particular item to be changed.Press the … or † button to increase or decrease the selected frequency. Press the EXIT button to exit. NOTES • If you make any changes to the equalizer settings, the sound mode is automatically switched to the custom mo...

English - 79 Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can setInternal Mute to On to cut off sound from the TV’s internal speakers. 1 Press the MENU button.Press the … or † button to select “Sound”, then pressthe ENTER button. 2 P...

English - 80 Sound Control Setting the On/Off Melody A melody sound can be set to come on when the TV is powered on or off. 1 Press the MENU button.Press the … or † button to select “Sound”, then pressthe ENTER button. 2 Press the … or † button to select “Melody”, then pressthe ENTER button.Press th...

English - 81 Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannelcontent over two speakers. Trusurround delivers a compelling, virtual surround sound experiencethrough any two-speaker playback system, including internal television speak...

English - 82 Sound Control Sound Reset If Game Mode is On (Refer to page 86), the Reset Sound function is activated. Selecting the Resetfunction after setting the equalizer resets the equalizer to the factory defaults. 1 Press the MENU button.Press the … or † button to select “Sound”, then pressthe ...

Special Features BP68-00586D-01Eng(074~083) 3/16/06 4:23 PM Page 83

1 Press the MENU button.Press the … or † button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Function Help”, thenpress the ENTER button. 3 Press the … or † button to select “Off” or “On”, thenpress the ENTER button. Press the EXIT button to exit. NOTE • The fu...

English - 85 Menu Transparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button.Press the … or † button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Menu Transparency”,then press the ENTER button.Press the … or † button to select leve...

Special Features English - 86 Using Game Mode When connecting to a game console such as PlayStation TM or Xbox TM , you can enjoy a more realistic gaming experience by selecting the game mode to on. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Pres...

English - 87 Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that isdefined by the user). The on-screen menu will instruct you to assign a password (you can change itlater, if necessary). How to Change Your Password 1 Press the MENU button.Pr...

1 Press the MENU button.Press the … or † button to select “Setup”, then press the ENTER button.Press the … or † button to select “V-Chip”, then pressthe ENTER button. 2 Press the number buttons toenter your current 4-digitPIN. (The default PIN for anew TV set is “0000”.)“V-Chip” menu is displayed. 3...

English - 89 How to Set up Restrictions Using “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: “TV Parental Guidelines” or“MPAA Rating”. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button.Press the … or † button ...

English - 91 How to Set up Restrictions Using “MPAA Rating” The Movie rating system uses “MPAA” (Motion Picture Association of America) system, and its mainapplication is for movies.When the rating control is on, the TV will automatically block any programs that are coded withobjectionable ratings (...

Special Features English - 92 Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-MA Mature audiences only. This program may contain mature themes, profane language,graphic violence and explicit sexual content. TV-14 Parents strongl...

English - 93 How to Set up Restrictions Using Canadian English 1 Press the MENU button.Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then pressthe ENTER button. 2 Press the number buttons toenter your current 4-digitPIN. (The defa...

English - 95 How to Set up Restrictions Using Canadian French 1 Press the MENU button.Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then pressthe ENTER button. 2 Press the number buttons toenter your current 4-digitPIN. (The defau...

English - 97 Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button.Press the … or † button to select “V-Chip”, then pressthe ENTER button. 2 Press t...

PC Display BP68-00586D-01Eng(084~103) 3/16/06 4:27 PM Page 103

PC Display English - 104 Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. Connecting a PC (15p D-SUB) to the TV 1 Connect a PC cable between the...

English - 105 Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. But the actual screens on yourPC will probably be different, depending upon your particular version of Windows and your particularvideo card. But even if your actual s...

PC Display English - 106 NOTES • The PC text quality is optimum in XGA mode (1024 x 768@60Hz).• Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table above shows all of the display modes that are supported:* The interlace mode is not supported.* T...

English - 107 Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is notremoved by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.After the noise has been reduced, re-adjust the picture so ...

PC Display English - 108 Changing the Picture Position After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 3 Press the … ...

1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 3 Press the … or † button to select “PC”, then press theENTER button. 4 Press the … or † button to select “Auto Adjustment”,then press the ENTER button.The picture...

English - 111 Viewing the Current Resolution You can get the resolution information of your PC. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 3 Press the … or † button to select “PC”, then press theENTER butto...

PC Display English - 112 Initializing the Picture Settings You can replace all picture settings with the factory default values. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 3 Press the … or † button to selec...

WISELINK BP68-00586D-01Eng(104~127) 3/16/06 4:28 PM Page 113

WISELINK English - 114 Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio files (MP3)saved on a USBMass Storage Class (MSC) device. Press the power button on theremote control or front panel. Connect a USB device containingJPEG and/or MP3 files to theW...

English - 115 1 Press the MENU button. Press the ENTER button toselect “Input”. 2 Press the … or † button to select “WISELINK”, thenpress the ENTER button. 3 Press the … or † button to select the correspondingMSC Memory Device, thenpress the ENTER button. A menu for selecting theformat of the files ...

English - 117 Selecting a Photo and Slide Show 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 115) 2 Press the œ or √ button to move to “Photo”, then pressthe ENTER button. The saved file information isdisplayed as a folder or file. 3 Press the INFO button todisplay “View” or “Sli...

WISELINK English - 118 5 Press the INFO button during “SlideShow” to set the option(Slide ShowSpeed, Background Music On/Off,Background Music Setting, List). Press the … or † button to select the option, then press the ENTER button. 6 To change the sub option, press the INFObutton again to open the ...

English - 119 (Photo) SlideShow Photo SlideShow is in progress. When the SlideShow and musicis paused by the PLAY/PAUSEbutton on the remote controlduring a SlideShow.To resume the SlideShow, pressthe PLAY/PAUSE button on theremote control again. When pressing the VOL +, -buttons on the remote contro...

WISELINK English - 120 Rotating 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 115) 2 Press the œ or √ button to move to “Photo”, then pressthe ENTER button. The saved file information isdisplayed as a folder or file. 3 Press the … , † , œ and √ buttons to select a file, thenpress...

WISELINK English - 122 Zoom (x 2) Zoom-in to a photo x2. Zoom-in to a photo x4. Current OSD Icon Zoom (x 4) Restore a photo to its original size. Zoom (x 1) Pan down to view the lower part of a zoomed-in photo. Pan Down Function Pan up to view the upper part of a zoomed-in photo. Pan Up Pan right to...

English - 123 Using the MP3 List This menu shows MP3 files from among the files saved on an MSC memory device. 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 115) 2 Press the œ or √ button to move to “Music”, then pressthe ENTER button. The saved file information isdisplayed as a ...

WISELINK English - 124 4 Press the PLAY/PAUSE button whileplaying an MP3 file to pause the file.Press the STOP button to exit Play mode. To exit WISELINK mode, press theWISE LINK button on the remote control. NOTES • This menu only shows files with the mp3 file extension. Files with other file exten...

English - 125 Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1 Complete Steps 1 to 4 of Using the WISELINK Menu.(Refer to page 115) 2 Press the œ or √ button to move to “Setup”, then pressthe ENTER button. 3 Press the … or † button to select an item you want, thenpress t...

Appendix BP68-00586D-01Eng(104~127) 3/16/06 4:29 PM Page 127

Appendix English - 128 Replacing the Lamp • Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new. • When do I need to replace...

Appendix English - 130 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of thesetroubleshooting tips apply, then call your nearest Samsung authorized service center. Possible Solution Try another channel. Adjust the antenna.Check all ...

English - 131 Cleaning and Maintaining Your TV Please follow these guidelines to get the maximum performance from your TV. Placement • Do not put the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near appliances with electric motors that create magnetic fields, such as vac...

BP68-00586D-01 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country CANADA U.S.A Customer Care Center 1-800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864) Web Site www.samsung.com/ca www.samsung.com Address...