Samsung DVD-V5600 - Manuals

English - 5 Overviews Front View of the DVD-VCR (DVD-V5600) 1. DVD DECK.2. OPEN/CLOSE BUTTON.3. VIDEO CASSETE COMPARTMENT.4. EJECT BUTTON.5. STANDBY/ON BUTTON.6. AUX VIDEO INPUT JACK.7. AUX AUDIO L/R INPUT JACK.8. PROGRESSIVE SCAN MODE BUTTON.9. FRONT PANEL DISPLAY.10. PROGRAMME SELECTION BUTTON.11....

6 - English 1. AUDIO L, R OUT JACKS.2. AERIAL IN CONNECTOR.3. AV2 (DEC./EXT.) IN/OUT SCART (EURO-21) JACK. 4. AUDIO L, R OUT JACKS (DVD only).5. VIDEO OUT JACK. 6. OUT TO TV CONNECTOR.7. AV1 (EURO AV) IN/OUT SCART. (EURO-21) JACK. 8. DIGITAL AUDIO OUT JACKS (COAXIAL).9. COMPONENT VIDEO OUT JACKS.10....

English - 7 Make sure that the following basic accessoriesare supplied with your DVD-VCR. You must insert or replace the batteries in theremote control when you:• Purchase the DVD-VCR• Find that the remote control is no longer working correctly 1 To release the battery compartment cover, push the ta...

8 - English 1. DVD,VCR Used to operate DVD, VCR. 2. STANDBY/ON Used to turn the power on or off. 3. Number buttons 4. TIMER Used to activate the timer recording ofa programme. 5. REC ( ● ) Used to make a recording on cassette. 6. SKIP ( / ) Use to skip a title, chapter or track. 7. STOP ( ■ ) Used t...

English - 9 TV RF cable Aerial 5 TV RF cable Aerial 2 3 4 4 1 2 3 Connecting DVD-VCR to the TVusing the RF Cable To receive television programmes a signal mustbe received from one of the following sources:• An outdoor aerial.• An indoor aerial.• A cable television network.• A satellite receiver. 1 R...

10 - English Connecting DVD-VCR to the TVusing the Audio/Video Cable You can connect your DVD-VCR to the televi-sion using the audio/video cable if the appropri-ate input is available on the television. 1 Connect one end of the video cable into the VIDEO output jack on the rear of the DVD- VCR. 2 Pl...

12 - English AV Receiver Connections Digital Audio out Jack To take full advantage of the movie theaterexperience that DVD offers, you may want toconnect your DVD-VCR to a complete SurroundSound system, including an A/V Receiver andsix Surround Sound speakers. If your A/Vreceiver is equipped with a ...

5 The current time and date are displayedautomatically. Check the Date and Time if it is :• Incorrect, refer to “Setting the Date and Time”. (See page 15) • Correct, press the RETURN button twice to exit the menu. 14 - English SETUP VCR PROG FUNC DVD OK RETURN MENU Clock Set Time Date Year 12 : 00 0...

English - 15 Tuning Your Television for the DVD-VCR Your DVD-VCR contains a 24-hour clock andcalendar used to:• Automatically stop programme recording.• Preset your DVD-VCR to record a programme automatically. You must set the date and time when:• You purchase the DVD-VCR.• Do not forget to reset th...

16 - English Setting the Menu Language Presetting the StationsAutomatically 1 Press the MENU button, then press the OK or Š button. 2 Press the OK or Š button again. The Language Set menu is displayed. 3 Press the › or ‚ button to select desired language, then press the OK or Š button. • Press the M...

English - 17 You do not need to preset the stations manuallyif you have already set them automatically. 1 Press the MENU button, then press the OK or Š button. 2 Press the › or ‚ button to select Install , then press the OK or Š button. The Install menu is displayed. 3 Press the › or ‚ button to sel...

18 - English If you have stored a TV station:• That you do not require• At the wrong programme position, you can cancel it. 1 Press the MENU button, then press the OK or Š button. 2 Press the › or ‚ button to select Install , then press the OK or Š button. The Install menu is displayed. 3 Press the ...

English - 19 6 Press the › or ‚ button to select required position, then press the OK button to swap the position. For example to move a TV station inprogramme 1 to programme 3. • Press the MENU button to exit the menu. Changing the Preset Station Table You can rearrange the station table and givedi...

20 - English Setting the VCR Output Channel Your DVD-VCR output channel may need to bechanged if the pictures suffer from interferenceor if your TV cannot find the pictures. 1 Press the MENU button, then press the OK or Š button. 2 Press the › or ‚ button to select Install , then press the OK or Š b...

English - 21 Before recording or playing back a cassette,you can select the required system standard.Otherwise, the system automatically selects thereception standard when you select AUTO.• When playing back a cassette, the standard is automatically selected by the DVD-VCR. • When you playback an NT...

22 - English Auto Power Off This feature automatically turns off your DVD-VCR if no signal is received and you do notpress any button for the selected time. 1 Press the MENU button, press the OK or Š button. 2 Press the › or ‚ button to select Auto Power Off . 3 Press the OK or Š button to select th...

English - 23 Screen Messages Your DVD-VCR displays most information boththe DVD-VCR and the television.You can choose to display or hide this informationon the television screen (If you configure theScreen Message to Off, the Fast Forward andRewind messages will not be displayed on thescreen. Howeve...

24 - English Selecting the Recording Speed Video cassettes have a safety tab to preventaccidental erasure. When this tab has beenremoved, you cannot record on the tape. 1 If you wish to protect a cassette, break off thetab using a small screwdriver. 2 To re-record over a protected cassette (safetyta...

English - 25 Recording from Another VCR orCamcorder You can copy a cassette to your DVD-VCR fromanother video source, such as another VCR or aCamcorder etc.• It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of...

26 - English Using the Assemble Edit Function This function allows you to start a new recordingat a specific position on the cassette while main-taining a very smooth scene change. 1 Insert the cassette to be edited in yourDVD-VCR. 2 Press the Š ll button to start playback. 3 When you reach the posi...

English - 27 9 When you have finished, press the OK button to set the Timer Programming. 10 Press the MENU button to exit the menu. 11 Press the STANDBY/ON button to activate the timer. Before starting recording, the DVD-VCR compares the timer duration with the remaining time on the cassette. You ca...

28 - English Cancelling a Preset Recording You can cancel any programmes that are:• Incorrect• No longer required 1 Press the MENU button, then press the › or ‚ button to select PROG . The Timer Method menu is displayed. 2 Press the OK or Š button. The list of preset recodings is displayed with the ...

English - 29 You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs.The following options are available.Press the AUDIO button on the remote control until the required option is displayed. Option Description L Used to listen to the sound on the left Hi-Fi channel...

30 - English Playing a Sequence Frame byFrame Searching for a Specific Sequence You can vary the playback speed using theShuttle function (up to nine times the normalspeed). Example: You wish to analyse a sportsperson’s technique, movement by movement.• No sound is heard when playing a sequence at v...

English - 31 Index Skip Search This feature will enable you to fastforward/rewind to a specific point on a tape: e.g.If you have recorded 3 different programmes ona tape and you have rewound the tape to thebeginning, by using this feature you can godirectly to the start of programme 2 simply bypress...

32 - English The tape counter:• Indicates the elapsed time in the play and record modes (Hours, Minutes and Seconds). • Is reset when a cassette is inserted in the DVD-VCR. • Allows you to find the beginning of a sequence easily. • If the remaining time is to be calculated correctly, you must indica...

English - 33 Setting Up the Language Features D D VD VD F F unctions unctions If you set disc menu, audio and subtitle lan-guage in advance, it will come up automaticallyevery time you watch a movie. Using the Disc Menu Language 1 Press the MENU button in the stop mode. Press the › or ‚ button to se...

34 - English Setting Up the Audio Options Dolby Digital Out • PCM : Converts to PCM (2CH) audio. Select PCM when using the Analog Audio Outputs. • Bitstream : Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the Digital Audio Output. MPEG-2 Digital Out • PCM : Converts to PCM ...

36 - English DVD Out • RGB : Sends RGB signal from the AV JACK (SCART terminal). • S-Video : Sends S-VIDEO signal from the AV JACK (S-Video terminal). • Video : Sends COMPOSITE VIDEO signal from the AV JACK (SCART terminal). The Parental Control function works in conjunc-tion with DVDs that have bee...

English - 37 37 - English DivX(R) Registration DivX, DivX Certified,and associated logosare trademarks ofDivXNetworks, Inc andare used under license. 6 Press the › or ‚ button to select the required level (e.g. Level 6 ). Press the OK or Š button. • Discs that contain Level 7 will now not play. OK R...

38 - English Firmware Upgrade Please read the below information beforeupdate procedure. 1 The following events may interrupt the updateprocedure and may result in permanent damage to DVD-VCR . • Unplugging the power cord.• Power outage.• Dirt or Scratch in the discs.• Open a tray door during process...

English - 39 Special Playback Features During DVD/VCD/CD playback you can selectfrom the following special playback options. To resume normal playback, press the Š ll but- ton. Still Press the Š ll button during playback. • The picture will still and the audio will mute.• To resume playback, press t...

40 - English Stop/Resume • Press the ■ button once to stop playback. To resume the DVD/VCD/CD from the pointwhere the disc stopped, press the Š ll button. • Press the ■ button twice to completely stop playback. The next time you press the Š ll button, the disc will start over from the begin-ning. • ...

English - 41 Adjusting the Aspect Ratio (EZ View) This function may be different depending on thetype of disc. To play using aspect ratio (DVD) 1 Press the EZ VIEW button. • The screen size changes when the button is pressed repeatedly. • The screen zoom mode operates differently depending on the sc...

42 - English If you are using a 4:3 TV For 16:9 aspect ratio discs - 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. - 4:3 Pan Scan The left and right portions of the screen are cut off an the central portion ...

English - 43 Zoom 1 During playback, press the MENU button. Press the › or ‚ button to select FUNC , then press the OK or Š button. The Function menu is displayed. 2 Press the Š button, then press the › or ‚ button to select ZOOM. 3 Press the OK or Š button. Press the › / ‚ or ¥ / Š button to select...

44 - English Marks Up to three Bookmarks can be inserted for agiven DVD/VCD, allowing you to quickly jump toyour favorite scene or song. 1 During playback, press the MARK button. 2 Press the ¥ or Š button to select one of the three mark placeholders (- - -).Keep on playing the DVD up to the scene yo...

English - 45 Cancel A-B Repeat 1 Press the REPEAT button to open the repeat menu. 2 Press the ¥ or Š button to selected Off , then press the OK button. • It is available to press the CLEAR button in order to stop repeat play. • When in VCD 2.0 mode (MENU ON mode), this function does not work. • Use ...

46 - English MP3/WMA Play If you insert an MP3/WMA Disc intothe DVD-VCR, you can see the folder directory. MP3/WMA Play Function 1 Press the › or ‚ button to select the desired music folder, then press the OK button. • Up to 7 music folders can be displayed at a time. If you have more than 8 folders...

English - 47 If you insert a Picture (JPEG) CD Disc into theDVD-VCR, you can see the folder directory. 1 Press the › or ‚ button to select the picture you want to view, then press the OK button. The selected picture is displayed. 2 Press the l ¥¥ or ŠŠ l button to display the previous or next pictur...

48 - English • If no buttons on the remote control are pressed for 10 seconds, the menu bar will disappear.Press the DISC MENU button on the remote control to display the menu bar. Slide show Press the ¥ or Š button to select . Press the OK button. The 3 icons are displayed for time interval. Press ...

English - 51 Technical Specifications Rated voltage AC 220 - 240V, 50Hz Power consumption 19Watts Weight 3.9 Kg Size 430mm X 282mm X 82mm Operating ambient temperature +5°C ~ +40°C Installation conditions Operation position : Horizontal, Relative humidity : Below 75% Video input (Rear) Euro Scart so...

52 - English Before contacting the Samsung after-sales service, perform the following simple checks.If you are unable to solve the problem after reading the below instructions, note: • The model and serial number on the rear of your DVD-VCR. • The warranty information. • A clear description of the p...

English - 53 Troubleshooting Guide (DVD) The icon appears onscreen. Disc does not play. 5.1 channel sound is notbeing reproduced. Playback mode differsfrom the Setup menu selection. The screen ratio cannotbe changed. No audio. Forgot password. If you experience otherproblems. ◆ Ensure that the disc ...

54 - English UNITED KINGDOM REPUBLIC OF IRELAND This Samsung product is warranted for the period oftwelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service isrequired, you should return the product to the retailerfrom whom...

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNGcustomer care centre. North America Latin America Europe CIS Asia Pacific Middle East & Africa CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864...