Samsung CTN464NC01 - Manuals

safety instructions _ 5 S a FET y INST ruCTIo NS SEvErE warNINg SIgNS For INSTallaTIoN The installation of this appliance must be performed by a qualified hob service technician trained by the manufacturer. Please see the section “Installing your Hob”. Plug the power cord into the proper wall socket...

6 _ safety instructions Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.- If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire. Pl...

8 _ safety instructions Do not insert fingers, foreign substances or metal objects such as pins or needles into the inlet, outlet, and holes. If foreign substances are inserted into any of these holes, unplug the power plug from the wall socket and contact your product provider or nearest service ce...

safety instructions _ 9 S a FET y INST ruCTIo NS Small amounts of food require shorter cooking or heating time. If normal times are allowed they may overheat and burn. Children should be supervised to ensure that they do not play with the appliance. Any spillage should be removed from the lid before...

10 _ disposal instructions CauTIoN SIgNS For ClEaNINg The hob should be cleaned regularly and any food deposits removed. Failure to maintain the hob in a clean condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possibly result in a hazardou...

Contents _ 11 CoNTENTS contents INsTAllING The hOb 12 12 Regulations and compliance12 Safety instructions for the installer13 Connecting to the mains power supply14 Installing into the countertop pARTs ANd feATURes 16 16 Cooking zones16 Control panel17 Components17 Induction heating18 The key featur...

12 _ installing the hob installing the hob Be sure the new appliance is installed and grounded only by qualified personnel. Please observe this instruction. The warranty will not cover any damage that may occur as a result of improper installation. Technical data is provided at the end of this manua...

installing the hob _ 13 INST all IN g T h E hob CoNNECTINg To ThE maINS powEr Supply Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of th...

14 _ installing the hob INSTallINg INTo ThE CouNTErTop Make a note of the serial number on the appliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer accessible after installation, as it is on the original rating plate on the u...

16 _ parts and features parts and features CooKINg zoNES 1. Induction cooking zone 1400 W with Power Boost 2000 W 2. Induction cooking zone 2200 W with Power Boost 3200 W 3. Induction rear Bridge zone 1800 W with Power Boost 2600 W 4. Induction front Bridge zone 1800 W with Power Boost 2600 W 5. Ind...

parts and features _ 17 p arTS a ND FEaT urES CompoNENTS Induction hob Installation brackets Screws INDuCTIoN hEaTINg • The principle of Induction heating : When you place your cookware on a cooking zone and you turn it on, the electronic circuits in your induction hob produce “induced currents” in ...

18 _ parts and features ThE KEy FEaTurES oF your applIaNCE • Ceramic glass cooking surface : The appliance has a ceramic glass cooking surface and four rapid - response cooking zones. • Touch control sensors : Your appliance is operated using touch control sensors. • Easy cleaning : The advantage of...

parts and features _ 19 p arTS a ND FEaT urES SaFETy ShuToFF If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off.Any residual warmth will be indicated with (for “hot”) ...

20 _ before you begin TEmpEraTurE DETECTIoN If for any reason the temperatures on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level.When you have finished using the hob, the cooling fan will continue t...

hob use _ 21 hob u SE SuITabIlITy TEST Cookware is suitable for induction cooking,if a magnet sticks to the bottom of thecookware and cookware is labelled as suitable by the cookware manufacturer. SIzE oF paNS Induction cooking zones adapt automatically to the size of the bottom of the cookware up t...

22 _ hob use uSINg SuITablE CooKwarE Better pans produce better results. • You can recognise good pans by their bases. The base should be as thick and flat as possible. • When buying new pans, pay particular attention to the diameter of the base. Manufacturers often give only the diameter of the upp...

hob use _ 23 hob u SE SwITChINg ThE applIaNCE oN 1. Touch the lock control sensor for approximately 3 seconds. 2. The appliance is switched on using the On/Off control sensor. Touch the On/Off control sensor for 1 second. The digital displays will show . After the On/Off control sensor has been actu...

24 _ hob use SwITChINg a CooKINg zoNE oFF To switch off a cooking zone, return the setting to by using the control panel’s control sensor. To switch off more quickly, touch the corresponding cooking zone’s key twice. uSINg ThE ChIlD SaFETy loCK You can use the child safety lock to safeguard against ...

hob use _ 25 hob u SE TImEr There are two ways to use the timer: using the timer as a safety shutoff: If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed. This function can be used for multiple cooking zones simultaneously. using t...

26 _ hob use Countdown timer For the countdown timer to be used, the appliance must be switched on but all the cooking zones must be switched off. 1. Touch the Timer control sensor. will appear in the timer display. 2. Set the desired period of time using the Timer setting selectors ( or ). The coun...

hob use _ 27 hob u SE waTEr boIlINg 1. Touch the corresponding cooking zone’s key. 2. Touch the Water boiling sensor. 3. Set the desired power level which will be used after water boiling. After water boiling, the cooking zone will automatically reduce to this power level and an acoustic signal soun...

28 _ hob use powEr maNagEmENT The cooking zones have a maximum power available to them. If this power range is exceeded by switching on the power boost function , Power Management automatically reduced the heat setting of paired another cooking zone. • Left side : No.1 and No.2 is paired cooking zon...

cleaning and care _ 29 C lE a NINg aND C arE cleaning and care hob Cleaning agents must not come into contact with a heated ceramic glass surface: All cleaning agents must be removed with adequate amounts of clean water after cleaning because they can have a caustic effect when the surface becomes h...

30 _ cleaning and care problem Dirt 1. Remove burnt-on sugar, melted plastic, aluminium foil or other materials with a glass scraper immediately and while still hot. There is a risk of burning yourself when the glass scraper is used on a hot cooking zone: 2. Clean the hob as normal when it has coole...

warranty and service _ 31 w arra NTy aND SEr v ICE warranty and service FaqS aND TroublEShooTINg A fault may result from a minor error that you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each speci...

32 _ warranty and service What should I do if the display is illuminated? Check for the following: • The hob is overheated because of abnormal operation. • After hob is cooled down, press the “On/Off” control sensor for resetting. What should I do if the display is illuminated? Check for the followi...

technical data _ 33 TEC h NICal D aT a technical data TEChNICal DaTa appliance dimensions Width 575 mm Depth 505 mm Height 56 mm worktop cut - out dimensions Width 560 mm Depth 490 mm Corner radius 3 mm Connection voltage 220 - 240 V ~ 50 / 60 Hz maximum connected load power 7.2 kW weight Net 11.3 k...

note CTN464NC01_XEU_00344A-01_EN-121018.indd 34 2012-10-18 �� 9:40:20