Samsung C01 - Manuals

SiPTel C01 IP Phone User Manual 1. INTRODUCTION 1.1. Overview The SiPTel IP Phone is a single user VoIP (Voice over Internet Protocol) phone for the home or small- medium size businesses. The SiPTel IP Phone supports ITU - T H.323 protocol for voice communication on data lines . It is a stand -alone...

SiPTel C01 IP Phone User Manual • Data Modulation Standards V.90, V.34, V.432bis, V.22bis, V.22, V.23, V.21 and V.23 reversible (Minitel), Bell 212, Bell 103 Dialup Modem V.42 Error Control • Country Code support • V.42 Error Control • V.42bis Compression • Protected Against Surge and Over voltage o...

SiPTel C01 IP Phone User Manual 1.4. Structure of SiPTel IP Phone 1.4.1. Keypad Figure 1) Keypad Structure of SiPTel IP Phone The description for each key is as follows. Key name Description Menu Ÿ Used to initiate the menu on LCD Ÿ Used to change between preferences when entering characters (Englis...

SiPTel C01 IP Phone User Manual ƒ P-Book Ÿ Used to move the cursor to the left in Phone Book mode. Ÿ Used to initiate the Phone Book menu. OK Ÿ Used to complete the input in Phone Book menu. Ÿ Used to confirm the entered or selected settings. Cancel Ÿ Used to cancel the selected menu, entered data, ...

SiPTel C01 IP Phone User Manual Status Flashing : Trying to find the Gatekeeper. Constant : Registered with Gatekeeper successfully. Call status display : Displayed when the call is connected successfully. : Displayed when the call isn’t connected. Kinds of connection : Static IP : DHCP : PPPoE Mute...

SiPTel C01 IP Phone User Manual 2. PRE-INSTALLATION CHECK LIST 2.1. Power Requirements § AC Voltage : External power adapter (100V -240V, 50/60Hz). § Please use only the power adapter provided with the SiPTel IP Phone. § For additional power adapter, please ask your product provider. Safety Should l...

SiPTel C01 IP Phone User Manual STEP 2 If the booting is completed properly, the following display will appear. You can see some Icons, Brand Name, ITSP given VoIP Phone Number, Time, etc. 3.3. Keying Instructions Some setup menus support a few character input mode, English lower -case, English capi...

SiPTel C01 IP Phone User Manual 4. GETTING STARTED WITH MENU 4.1. Call Log This menu allows user to look up the Dialed, R eceived and Missed calls list. User can look up the call lists up to 100 lists. User can make a call by using this call logs, and delete them when not required. 4.1.1. Rcvd Calls...

SiPTel C01 IP Phone User Manual STEP 6 You can see the information such as the C aller Name if exists a phone book entry for that number, Date [Date/Month(day)], Time, etc., Press ‘Cancel’ button to move to the previous screen. STEP 7 Last information is Call duration in minutes [HH:MM]. Press ‘Canc...

SiPTel C01 IP Phone User Manual STEP 2 Select Received or Transmitted ( Dialed ) that you want to clear from list. Press ‘Cancel’ button to move to the previous screen. STEP 3 Deleting all the options requires the authentication. Enter your user password. Press ‘Cancel’ button to move to the previou...

SiPTel C01 IP Phone User Manual 4.2.1.1. Find the number by Index STEP 1 Select ‘1: Find Number’ to find the telephone number registered in the phone book. Use the navigation key or press the menu number to select the menu, and press ‘OK’ button. Press ‘Cancel’ key to move to the upper menu. STEP 2 ...

SiPTel C01 IP Phone User Manual 4.2.1.2. Find the number by Name STEP 1 Select ‘1: Find Number’ to find a telephone number from the phone book. Use the navigation key or press the menu number to select the menu, and press ‘OK’ button. Press ‘Cancel’ key to move to the upper menu. STEP 2 Select ‘By N...

SiPTel C01 IP Phone User Manual 4.2.2. Add This menu is to register a new telephone number into the phone book of IP Phone. The phone numbers can be registered up to 100 numbers. STEP 1 Select ‘2: ADD’ menu in PHONE BOOK menu selection. Use the navigation key and press OK or press the menu number to...

SiPTel C01 IP Phone User Manual STEP 1 Select ‘3: Memory Dial’ in the PHONE BOOK menu selection. Use navigations key and press OK or press the menu number to select the menu. Press ‘Cancel’ key to return to the upper menu. STEP 2 Select the menu related to which of the three single touch KEYs you wa...

SiPTel C01 IP Phone User Manual 4.3.1. Ring Selection STEP 1 Select ‘1: Ring Select’ menu in the RING/VOLUME menu. Use navigation key or press the menu number to select the number. Press ‘Cancel’ key to move to the previous display. STEP 2 The cur rent ringing tone will be displayed in the second li...

SiPTel C01 IP Phone User Manual STEP 2 Adjust the ringing tone volume. Use the navigation key to adjust the volume of the ring tone. Press ‘OK’ button to save the volume setting and to return to the upper menu. Press ‘Cancel’ key to return to the upper menu without adjusting the volume. 4.4. Setup T...

SiPTel C01 IP Phone User Manual STEP 1 Select ‘2: User PWD’ option under ‘My Phone’ Menu Press 2 or select ‘2. User PWD’ using navigation keys and press OK key. STEP 2 The icon will appear. Enter the new password. You can enter password up to 15 digits. Enter the current password, press OK key. Ente...

SiPTel C01 IP Phone User Manual STEP 5 Enter the DNS Server IP address, and press ‘OK’ button. Enter the DNS IP Address given by ISP and press OK. Here you can give three DNS Addresses of you choice and press OK after each DNS entry. Ex: To enter 202.54.30.1, you would key in 202*54*30*1 STEP 6 If y...

SiPTel C01 IP Phone User Manual STEP 2 Select ‘YES’ to select DHCP, and press ‘OK’ button. Use left arrow button from navigation keys to select ‘YES’ option and press OK key. STEP 3 After a while you’ll be able to see the following screen Use left arrow button from the navigation key to select YES a...

SiPTel C01 IP Phone User Manual STEP 3 Enter the password for your ADSL ID. Enter the Password related to the User ID of your ADSL / PPPoE. STEP 4 Select ‘YES’ to apply the new setting, and press ‘OK’ button. Use navigation key to select the option YES and wait for a while. STEP 5 Select ‘YES’ to re...

SiPTel C01 IP Phone User Manual STEP 2 Select ‘1. GK Selection[GKx]’ and press ‘OK’ button. Just press OK button here as there will be only one option for selection. Press CANCEL button to leave thing as it is. STEP 3 Select GK option that are available from GK1 to GK6. Use navigation key to select ...

SiPTel C01 IP Phone User Manual STEP 1 Select ‘4. Modem’ from SETUP menu after pressing MENU button. Press 4 or select ‘4: Modem’ using navigation keys and press OK key. 4.4.4.1. Editing Profile This menu is used to configure the ISP account to be used to connect to a dial- up ISP. ISP account inclu...

SiPTel C01 IP Phone User Manual STEP 4 Select ‘2 : Tel [101] to enter the telephone number of the ISP Press 2 or use the up and down arrow keys to select the Telephone option and press OK. STEP 5 Enter the telephone number of the ISP for the profile. Use ‘Menu’ key to toggle the character input mode...

SiPTel C01 IP Phone User Manual STEP 9 Enter the password for the ISP of this profile. If you want to edit the existing password, use ‘Delete’ key. Use ‘Menu’ key to toggle the character input mode. Press OK key after editing the password 4.4.4.2. ACT: [Profile] This menu is to select one of the thr...

SiPTel C01 IP Phone User Manual STEP 2 Select your country. This is also important to get proper time displayed on SiPTel screen. Use left and right arrow button in the navigation keys to select your Country press OK key. 4.4.4.3.2. Dial Type STEP 1 Select ‘2: Dial Type’. Press 2 or select ‘2: Dial ...

SiPTel C01 IP Phone User Manual STEP 2 Enter the Time Out value. The range is 0 ~ 255 minutes. Enter the time- out value, and press ‘OK’ button. 4.4.4.3.4. Speaker This menu is to select whether you will hear the modem connection beep sound or not. Modem sound, though it is rather unpleasant to hear...

SiPTel C01 IP Phone User Manual STEP 1 Select ‘5.TIME’ from SETUP menu list after pressing MENU key. Use navigation key or press the menu number to select the menu. Press ‘Cancel’ button to move to the upper menu. 4.4.5.1. Time Zone STEP 1 Select “1: Time Zone’ from TIME menu under SETUP. Use naviga...

SiPTel C01 IP Phone User Manual STEP 2 Select ENABLE / DISABLE as per your area’s requirement. Use navigation key or press the menu number to select the menu. Press ‘Cancel’ button to move to the upper men u. 4.4.6. PSTN The general telephone network that we have for our Fixed Wire Phones at home ar...

SiPTel C01 IP Phone User Manual 4.4.6.2. Default Call. Default Call allows you to select whether VOIP or PSTN should work as default when the phone goes off- Hook. This option mainly required when u have both CABLE and PSTN connected to the same phone for both VOIP and PSTN calls. If you are only a ...

SiPTel C01 IP Phone User Manual 4.4.7.1. Proxy IP STEP 1 Select ‘1. IP’ to enter IP Address of your local proxy server. Use navigation key or press the menu number to select the menu. Press ‘Cancel’ button to move to the upper menu. STEP 2 Enter Proxy IP address or DNS name of your local proxy. Pres...

SiPTel C01 IP Phone User Manual 4.5. Information This menu is to provide users with the information on the SiPTel IP Phone such as network setting and version, Mac address etc. 4.5.1. Network This menu shows the network status the phone is employed, which includes IP address, subnet mask, default ga...

SiPTel C01 IP Phone User Manual STEP 5 You can see the SiPTel IP Phone IP information in the second information display. Use navigation key to see the next information. Press ‘Cancel’ key to return to the upper menu. STEP 6 You can see the subnet mask information in the third information display. Us...

SiPTel C01 IP Phone User Manual STEP 2 Select ‘5: Information’ in menu selection. Press OK button or Press 5 to select. STEP 3 Select ‘2: Version’ from the menu. Press OK button or Press 2 to select. Press ‘Cancel’ key to return to the upper menu. STEP 4 You can see the following display. ‘Boot’ mea...

SiPTel C01 IP Phone User Manual STEP 2 You will see following screen while it attempts to get your account balance. It may take few seconds dependi ng on the speed of internet to get the account balance. Please wait for a moment. STEP 4 You will see the account balance there after. It displays your ...

SiPTel C01 IP Phone User Manual 5. Using SiPTel IP Phone 5.1. Connecting IP phone to Internet 5.1.1. Using in Dial-up Mode STEP 1 Press @ISP button on the key pad of SiPTel IP Phone. The built-in modem will try to connect to the dial -up ISP preset in Modem setup. If you want to cancel to connect to...

SiPTel C01 IP Phone User Manual STEP 5 If you can see the following display, you can dial the destination number to make a call. Please wait till the SiPTel IP Phone can be registered with the Gatekeeper of ITSP. If you can see constant top left display , you can dial the number. 5.1.2. Using with B...

SiPTel C01 IP Phone User Manual STEP 2 Pick up the handset or Press Speaker button. The call will be dialed to the destination number automatically. Pleas e wait till the call is placed successfully. STEP 3 If the call is connected to the destination TEL number, the duration of the ongoing calls wil...

SiPTel C01 IP Phone User Manual STEP 3 If the call is connected to the destination party successfully, the call starting time, and call duration time will be displayed on the LCD. If you can see the icon on the LCD, you can start to speak over the phone. 5.3. Making a PSTN call To use PSTN mode, you...

SiPTel C01 IP Phone User Manual 5.5. Making a call in Call Log mode STEP 1 Press ‘Call Log’ button, or press ‘MENU’ and select ‘1: Call Log’. STEP 2 Select either ‘Received Calls’, ‘Dialed Calls’, or ‘TX/Rx Calls’ etc., STEP 3 Select the desired number. STEP 4 Pick up the handset. The call will be m...