Samsung AC052MNADKH/EU - Manuals

6 English Safety Inf ormation Install your appliance on a level and hard floor that can support its weight. • Failing to do so may result in abnormal vibrations, noise, or problems with the product. Install the drain hose properly so that water drains correctly. • Failing to do so may result in wate...

7 English Safety Inf ormation FOR USING WARNING If the appliance is flooded, please contact your nearest service centre. • Failing to do so may result in electric shock or fire. If the appliance generates a strange noise, a burning smell or smoke, cut off the power supply immediately and contact the...

11 English Safety Inf ormation concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. FOR CLEANING WARNING Do not clean the appliance by spraying w...

12 English A t a Glanc e The actual product may differ slightly from the image depicted below. Indoor Unit Overview At a Glance AC  MNADKH Main parts Air fi lter Air fl ow blade (up and down) Air fl ow blade (left and right) Air intake Room temperature sensor Display Power button/ Remote controll...

13 English A t a Glanc e At a Glance AC  MNTDEH Main parts Air fi lter (under the panel) Air fl ow blade (up and down) Blade pin lever Air intake Air fl ow blade(left and right) Room temperature sensor Display Turbo indicator Timer/Auto clean indicator Power indicator Power button Remote controll...

14 English A t a Glanc e Remote Control Overview 01 05 06 070809 16 17 18 20 21 02 03 04 11 12 13 19 14 15 10 01 Set temperature indicator 02 Timer option indicator 03 Operation mode indicator 04 Options indicator 05 Low battery indicator 06 Transmit indicator 07 Fan speed indicator 08 Vertcal air s...

15 English A t a Glanc e Replacing batteries When the icon appears in the remote control display, replace the batteries with new ones. Two 1.5V AAA type batteries are required. two 1.5V AAA type batteries Correct disposal of batteries in this product (Applicable in countries with separate collection...

16 English Basic Oper ation Auto In Auto mode, the air conditioner will automatically adjust the temperature and fan speed to maintain your fresh environment. • When the indoor temperature is too high, the powerful cool breeze is generated and when the indoor room becomes cool enough, the soft breez...

17 English Basic Oper ation Heat In Heat mode, you can warm your room even in fall and winter. • The fan may not commence immediately to avoid generating a cold breeze. • In Heat mode, defrost operation may be performed to remove the frost formed on the outdoor unit. (When the frost is removed by th...

18 English Basic Oper ation Turning the air conditioner on Press the button to operate the air conditioner. Selecting the operation mode Press the button to select an operation mode. ► ► ► ► Adjusting the temperature Press the button to adjust the temperature. Mode Temperature control Auto/Cool/ Dry...

19 English Basic Oper ation Selecting air flow direction Keep the air flow in a constant direction by stopping the movements of the vertical and horizontal air flow blades. In operation ► NOTE • If you adjust the vertical air flow blade manually, it may not close completely when you turn off the air...

20 English A dvanced Oper ation Setting the On timer When the air conditioner is turned off: 1. Press the button to select (On). • The (On) indicator will keep blinking and you can set the time. 2. Press the or button to set the time. • You can set the time in half hour intervals from 30 minutes (0....

21 English A dvanced Oper ation Setting the Off timer When the air conditioner is turned on: 1. Press the button to select (Off). • The (Off) indicator will keep blinking and you can set the time. 2. Press the or button to set the time. • You can set the time in half hour intervals from 30 minutes (...

22 English A dvanced Oper ation When the air conditioner is operating in Cool mode; 1. Press the button to select . • The ( ) indicator will keep blinking and you can set the time. 2. Press the or button to set the time. • You can set the time in half hour intervals from 30 minutes (0.5 on the displ...

23 English A dvanced Oper ation • Fall asleep mode: Provides you with comfortable environment for a good sleep by rapid cooling and hypnagogue expedition breeze. • Sound sleep mode: The sound sleep mode adjusts temperature and air flow in waves to maintain healthy skin temperature while it aids deep...

24 English A dvanced Oper ation When the air conditioner is operating in Cool mode; 1. Press the button. 2. Press the , or button until the (Turbo) indicator starts blinking. 3. Press the button to set the Turbo function. • The (Turbo) indicator will be displayed on the remote control display and Tu...

25 English A dvanced Oper ation When the air conditioner is turned on 1. Press the button. 2. Press the , or button until the ( ) indicator starts blinking. 3. Press the button to set the Purity function. • ( )  ( ) indicator will be displayed on the remote controller display and Ionizer function w...

27 English A dvanced Oper ation When the air conditioner is turned on: 1. Press the button. 2. Press the , or button until the (Zone) indicator starts blinking. 3. Press the button to select the indoor unit to operate. • You can select individual units in order of 1 to 4 or select all indoor units a...

28 English Clea ning and Maint enanc e CAUTION • Before cleaning, be sure to turn off the equipment and disconnect the power plug. Cleaning the exterior AC  MNADKH Wipe the surface of the unit with a slightly wet or dry cloth when needed. Wipe off dirt from oddshaped areas by using a soft brush. ...

29 English Clea ning and Maint enanc e Clea ning and Maintenance Cleaning the filter AC  MNADKH AC  MNTDEH 1. Opening the panel Tightly grab top of the front panel and pull it down to open. Then slightly lift the panel up. Air fi lter 2. Removing the Air fi lter Grab the handle and lift it up....

30 English Clea ning and Maint enanc e 3. Cleaning the air fi lter Washable foam based air fi lter captures large particles from the air. The fi lter is cleaned with a vacuum or by hand washing. Open the panel and put the Air fi lter out. Insert the Air fi lter back in its original position and clos...

31 English Clea ning and Maint enanc e Maintaining the Air Conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain in best conditions. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the po...

32 English Clea ning and Maint enanc e This internal protection operates if an internal fault occurs in the air conditioner. Type Description Against cold air The internal fan will be off against cold air when the heat pump is heating. De-ice cycle The internal fan will be off against cold air when ...

33 English Appendix If the air conditioner operates abnormally, refer to the following chart to save time and unnecessary expenses. Problem Solution The air conditioner does not work at all. • Check the power status, then operate the air conditioner again. • Switch on the circuit breaker, plug in th...

37 English Appendix The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. MODE OPERATIONAL TEMPERATURE INDOOR HUMIDITY INDOOR OUTDOOR COOLING 18 ˚C to 32 ˚C -15 ˚C to 50 ˚C 80 % or less HEATING 30 ˚C or less -2...

38 English Appendix Type Model Net weight (kg) Net dimension (W x D x H) (mm) Indoor unit AC026MNADKH 7.6 750 x 246 x 249 AC035MNADKH 7.6 750 x 246 x 249 AC052MNADKH 10.8 896 x 261 x 261 AC071MNADKH 14.4 1065 x 294 x 301 AC100MNTDEH 18.5 1280 x 253 x 345 Technical specifications

5 English Installation Preparation Step 1.1 Choosing the installation location Overview of installation location requirements CAUTION Step 1.2 Checking and preparing accessories and tools Accessories Accessories in the indoor unit package AC  MNADKH Installation plate (1)  026/035  (01 frame)...

6 English Installation AC  MNTDEH Installation plate (1)  100  Remote control (1) Remote control battery (2) User Manual (1) Installation Manual (1) Remote Control Holder (1) M4 x 16 Tapped Screws (2) Tools General tools • Vacuum pump (Backward flowing prevention) • Manifold gauge • Stud find...

7 English Installation A C B D F E 2 Drill the hole. CAUTION • Be sure to drill only one hole. • Make sure that the hole slants downwards so that the drain hose slants downwards to drain water well. Step 1.4 Performing leak test Leak test LEAK TEST WITH NITROGEN (before opening valves) In order to d...

8 English Installation Step 2.1 Disassembling the cover panel (Only for AC  MNADKH) 1 Remove the cap screws, then the screws. 2 Unlock the side hooks ( , ), then centre hooks ( ).Then unlock the bottom hooks ( ) to pull out the cover panel. B B C A A 1 2 4 Step 2.2 Disassembling the installation ...

11 English Installation have the same level of withstand voltage with the power cable. (Comply with the local regulations on extensions.) WARNING • In case of extending the electric wire, please DO NOT use a round-shaped pressing socket. – Incomplete wire connections can cause electric shock or a fi...

15 English Installation NOTE • Excessive torque may cause gas leakage. When extending the pipe with welding or brazing, ensure that nitrogen is used during the welding or brazing process. The joint must be accessible and serviceable. CAUTION • Tighten the flare nut at the specified torque. If the fl...

16 English Installation Step 2.12 Fixing the indoor unit to the installation plate CAUTION • Make sure that the pipe bundle does not move when you install the indoor unit onto the installation plate. Step 2.13 Assembling the cover panel (Only for AC  MNADKH) 1 Lock the side hooks (D), then centre...

17 English Installation • Set the indoor unit address and installation option with remote controller option. Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting option at the same time. You need to set twice when setting indoor unit address an...

22 English Installation Setting an indoor unit address and installation option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 0 A 1 - - 3 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 1 - 1 - 1 B assign option codes except SEG 1, 7 which are page options. Setting the installation options in a batch 1 Make sure that the power is ...

25 English Installation Detection of errors  If an error occurs during the operation, an LED flickers and the operation is stopped except the LED.  If you re-operate the air conditioner, it operates normally at first, then detect an error again. LED Display on the receiver & display unit LED D...