Samsung AC035RN1DKG/EU - Manuals

Safety Infor mation 5 English CAUTION Install your appliance on a level and hard floor that can support its weight. • Failing to do so may result in abnormal vibrations, noise, or problems with the product. Install the drain hose properly so that water is drained correctly. • Failing to do so may re...

Safety Information Safety Infor mation 6 English CAUTION When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the circuit breaker. • Failing to do so may result in electric shock or fire. FOR USING WARNING If the appliance is flooded, ple...

Safety Information Safety Infor mation 8 English If any foreign substance such as water has entered the appliance, cut-off the power supply and contact the nearest service center. • Failing to do so may result in electric shock or fire. Do not attempt to repair, disassemble, or modify the appliance ...

Safety Information Safety Infor mation 10 English For use in Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning ...

At a Glance 11 English Indoor Unit Overview At a Glance 1WAY (PC1BWFMAN) 02 01 04 05 03 01 Display 02 Remote control sensor 03 Airflow blade 04 Wind-Free panel (You can use the Wind-Free Cooling function when the Cool, Dry, or Fan mode is running.) (Refer to the remote control manual for product ope...

At a Glance 13 English Operation Features Operating temperature and humidity Model Mode Outdoor temperature Indoor temperature Indoor humidity AC026RN1DKGAC035RN1DKG Cool mode -15°C to 46°C 18°C to 32°C 80% or less Heat mode -20°C to 24°C 30°C or less - Dry mode -15°C to 46°C 18°C to 32°C 80% or les...

Cl eaning and Maint enanc e 14 English Cleaning and Maintaining Cl eaning and Maint enanc e Cleaning and Maintaining Cleaning the indoor unit exterior 1WAY Wipe the surface of the unit with a slightly wet or dry cloth when needed. Wipe off dirt of odd- shaped areas by using a soft brush. CAUTION • D...

Cl eaning and Maint enanc e 15 English Cl eaning and Maint enanc e Cleaning the air filter CAUTION • Before cleaning the indoor unit, be sure to turn off the auxiliary power switch. • Be sure to hold the grille with a hand to prevent dropping from the opening of the front grille. 1WAY (PC1BWFMAN) 1 ...

Cl eaning and Maint enanc e 16 English Cleaning and Maintaining Cl eaning and Maint enanc e 2 Cleaning the air filter Clean the air filter with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with running water and dry it in a ventilated area. CAUTION Do not scrub the air filter ...

Cl eaning and Maint enanc e 17 English Cl eaning and Maint enanc e 4 Resetting the air filter After cleaning and reassembling the air filter, be sure to reset the filter-cleaning reminder as follows: • Indoor unit with the wired remote control: Press the Filter Reset button. • Indoor unit with the w...

Cl eaning and Maint enanc e 19 English Cl eaning and Maint enanc e 3 Reassembling the air filter CAUTION • If the indoor unit is used without the air filter, the indoor unit may be damaged due to dust. DB68-08166A-05_IB_CAC R32 Universal Wind Free 1,4way_EU_EN.indd 19 2024-01-18 오전 9:52:29

Cl eaning and Maint enanc e 21 English Cl eaning and Maint enanc e Periodical maintenance Unit Maintenance item Interval Requires qualified technicians Indoor unit Clean the air filter. At least once a month Clean the condensate drain pan. Once a year Required Clean up the heat exchange. Once a year...

Cl eaning and Maint enanc e 22 English Cleaning and Maintaining Cl eaning and Maint enanc e Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expense. Problem Solution The air conditioner does not operate immediately after it ...

Cl eaning and Maint enanc e 25 English Technical specifications Type Model Net weight(kg) Net dimension(W x D x H) (mm) Indoor unit AC026RN1DKG/EU 9.2 970 x 410 x 135 AC035RN1DKG/EU 9.2 970 x 410 x 135 AC052RN4DKG/EU 14.5 840 x 840 x 204 AC071RN4DKG/EU 14.5 840 x 840 x 204 AC100RN4DKG/EU 18.0 840 x ...

COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/support IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support GERMANY 06196 77 555 77 www.samsung.com/de/support FRANCE 01 48 63 00 00 www.samsung.com/fr/support SPAIN 91 175 00 15 www.samsung.com/es/support PORTUGAL 210 608 098 ...

5 English Safe ty Inf ormation ŷ Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric specifications and with the instructions provided in the wiring scheme. Always verify that all connections comply with the standards applicable to th...

6 Installation Procedure Installation Pr ocedur e English Installation Procedure Step 1 Checking and preparing accessories The following accessories are supplied with the indoor unit. The type and quantity may differ, depending on the specifications. 1 way Cassette Pattern sheet A (1) Pattern sheet ...

7 Installation Pr ocedur e English Step 2 Choosing the installation location Installation location requirements ŷ There must be no obstacles near the air inlet and outlet. ŷ Install the indoor unit on a ceiling that can support its weight. ŷ Maintain sufficient clearance around the indoor unit. ŷ Be...

8 Installation Procedure Installation Pr ocedur e English Indoor unit dimensions 1 way Cassette (Unit: mm) 410 145 34 22 46 50 77 970 80 A B 500 1198 Ceiling 1150 (Ceiling opening dimension) 249 (Spac e o f suspension bolts) 440 (C eiling opening dimension) 1036 (Space of suspension bolts) Model AC0...

11 Installation Pr ocedur e English Step 3 Optional: Insulating the body of the indoor unit If you install a cassette type indoor unit on the ceiling when temperature is over 27°C and humidity is over 80%, you must apply an extra 10 mm thick polyethylene insulation or a similar type of insulation to...

12 Installation Procedure Installation Pr ocedur e English Step 4 Installing the indoor unit When deciding on the location of the air conditioner the following restrictions must be taken into account. 1 Place the pattern sheet on the ceiling at the spot where you want to install the indoor unit. NOT...

13 Installation Pr ocedur e English 7 Adjust the unit to the appropriate position, taking into account the installation area for the front panel. ŷ Place the pattern sheet on the indoor unit. ŷ Adjust the space between the ceiling and the indoor unit by using a dimension gauge. ŷ Fix the indoor unit...

14 Installation Procedure Installation Pr ocedur e English Step 6 Cutting and flaring the pipes 1 Make sure that you have the required tools available: pipe cutter, reamer, flaring tool, and pipe holder. 2 If you wish to shorten the pipes, cut them with a pipe cutter, ensuring that the cut edge rema...

15 Installation Pr ocedur e English Outer Diameter (mm) 7RUTXH1ŷP Ø6.35 14 to 18 Ø9.52 34 to 42 Ø12.70 49 to 61 Ø15.88 68 to 82 Ø19.05 100 to 120 1ŷP NJIŷFP NOTE ŷ If the pipes must be shortened, see Step 6 Cutting and flaring the pipes on page 14 . 2 Be sure to use an insulator thick enough to cove...

16 Installation Procedure Installation Pr ocedur e English NOTE ŷ Always make the seam of pipes face upwards. 2 Wind insulating tape around the pipes and drain hose avoiding compressing the insulation too much. Insulation cover pipe Insulation pipe Be sure to overlap the insulation. Indoor unit CAUT...

17 Installation Pr ocedur e English Step 10 Installing the drain hose and drain pipe 1 Push the supplied drain hose as far as possible over the drain socket. 2 Tighten the metal clamp as shown in the picture. 3 Wrap the supplied large sealing pad over the metal clamp and drain hose to insulate and f...

18 Installation Procedure Installation Pr ocedur e English ŷ Install horizontally. Indoor unit Be horizontal Flexible hose ŷ Max. allowable axis gap. Indoor unit Max. 20 mm ŷ Max. allowable bending angle. Max. 30˚ Indoor unit NOTE ŷ If a concentrated drain pipe is installed, refer to the figure belo...

20 Installation Procedure Installation Pr ocedur e English 4 Reassemble the electrical component box cover, carefully tightening the screw. 1 phase Indoor Unit 1(L)2(N) F2F1 Outdoor Unit Indoor Power Main power cable Communication cable Cable Tie 1(L) 2(N) N L Cableclamp 3 phase 1(L) 2(N) L2(S) L3(T...

21 Installation Pr ocedur e English Step 14 Optional: Extending the power cable 1 Prepare the following tools. Tools Spec Shape Crimping pliers MH-14 Connection sleeve (mm) 20xØ6.5 (HxOD) Insulation tape Width 19 mm Contraction tube (mm) 70xØ8.0 (LxOD) 2 As shown in the figure, peel off the shields ...

22 Installation Procedure Installation Pr ocedur e English 5 Apply heat to the contraction tube to contract it. Method 1 Method 2 Contraction tube Contraction tube 6 Wrap it with the insulation tape twice or more and position your contraction tube in the middle of the insulation tape. Method 1 Metho...

23 Installation Pr ocedur e English 2 Set the option values. CAUTION ŷ The total number of available options are 24: SEG1 to SEG24. ŷ Because SEG1, SEG7, SEG13, and SEG19 are the page options used by the previous remote control models, the modes to set values for these options are skipped automatica...

24 Installation Procedure Installation Pr ocedur e English Steps Remote control display 3 Set the SEG4 and SEG5 values: a Set the SEG4 value by pressing the (Low Fan) button repeatedly until the value you want to set appears on the remote control display. SEG4 b Set the SEG5 value by pressing the (H...

28 Installation Procedure Installation Pr ocedur e English Setting the indoor unit addresses Option No. for an indoor unit address: 0AXXXX-1XXXXX-2XXXXX-3XXXXX Before installing an indoor unit, be sure to set an address for the indoor unit by taking the following steps: 1 Make sure that the power is...

31 Installation Pr ocedur e English Installation Pr ocedur e ŷ Even if you set the Use of drain pump (SEG8) option to 0, it is automatically set to 2 (the drain pump is used with 3 minute delay). ŷ If you set the Maximum filter usage time (SEG18) option to a value other than 2 and 6, it is automatic...

32 Installation Procedure Installation Pr ocedur e English Installation Pr ocedur e Emergency Temperature Output (ETO) function CAUTION ŷ In order to deploy the ETO function, the MIM-B14, an external contact interface module, must be installed in each indoor unit. – The ETO is a concept of emergency...

33 Installation Pr ocedur e English Installation Pr ocedur e ETO operation specifications 1 Main indoor unit – Based on the external contact control settings, the main indoor unit decides whether to generate output when an error (indoor unit stop) occurs. – Based on the ETO settings, the main indoor...

34 English Troubleshooting Appendix Troubleshooting 1 way Cassette Abnormal conditions LED lamp display Remarks Operation Defrost Timer Fan Filter reset Blue Yellow Power reset X X X X Error of temperature sensor in the indoor unit (Open/Short) X X X X Error of heat exchanger sensor in the indoor un...