Samsung 820DXN-2 - Manuals

When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it with a soft, dry cloth. • (Do not use chemicals such as wax, benzene, alcohol, thinner,mosquito repellant, lubric...

Power Installation Guide • Make sure to read and follow the instructions carefully and correct-ly. Failing to do so, may result in death, serious personal injury orfire. Power Installation Guide • Before installing the product, make sure to check the power requirementsfor the installation location. ...

Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure a...

• Component : PC • HDMI : PC / BNC Power button [ ] Use this button for turning the LCD Display on and off. Brightness Sensor (Optional) Automatically detects the surrounding brightness it accordingly. Note This function is activated only on the models equipped with an auto bright-ness sensor. Power...

AV IN [VIDEO] Connect the [ VIDEO ] terminal of your mon-itor to the video output terminal of the exter-nal device using a VIDEO cable. AUDIO OUT Headphone/External speaker output termi-nal. HDMI IN Connect the HDMI terminal at the back ofyour LCD Display to the HDMI terminal ofyour digital output d...

RGB OUT LAN (LAN Connection Terminal) USB1,USB2 (USB Connection Terminal) Keyboard / Mouse, Mass Storage DeviceCompatible. Note See Connecting Cables for further information regarding cable connections. Remote Control Note The performance of the remote control may be affected by a TV or other electr...

RETURN EXIT MagicInfo 1. POWER Turns the product On. 2. OFF Turns the product Off. 3. Number Buttons Used to enter the password during the OSD adjustment orto use MagicInfo . 4. DEL / GUIDE but- ton The "-" button is used to select Digital channels. Electronic Program Guide (EPG) display. - ...

FM Stereo Mono Mono ManualChange Stereo Mono ↔ Stereo SAP Mono ↔ SAP Mono DUAL- STEREO/MONO, DUAL l / DUAL ll and MONO/NICAMMONO/NICAM STEREO can be operated depending on thebroadcasting type by using the DUAL button on the remotecontrol while watching TV. 14. ENTER/PRE-CH This button is used to ret...

Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearestSAMSUNG Distributor to place an order. After your order is placed, installation profes-sionals will visit y...

Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm tocustomers when the installatio...

To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastichanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the product on the wall...

A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (direction of the arrow) toadjust the angle. Note You can...

Connections Connecting a Computer There are several ways to connect the computer to the monitor. Chooseone from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, RGB port on the back of your LCDDisplay and the 15 pin D-sub Port on the com...

Connect the DVI/RGB AUDIO IN port on the rear side of the monitor to thesound card of the PC. Connect the power cord for your LCD Display to the power port on the backof the LCD Display. Turn on the power switch. Note • Turn on both your computer and the LCD Display. • Contact a local SAMSUNG Electr...

Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or backof the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks onthe camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display . 2. Connect a video cable b...

2. Select BNC for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control. Connecting Using a DVI Cable 1. Connect between the DVI OUT port on the LCD Display and the input port on anothermonitor using a DVI cable. 2. Connect between the AUDIO OUT po...

Note In HDMI mode, only PCM format audio is supported. Connecting Using a DVI to HDMI Cable 1. Connect the DVI output terminal of a digital output device to the HDMI IN terminal of theLCD Display using a DVI to HDMI cable. 2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the ...

Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM andAUDIO OUT on LCD Display. Connecting a LAN Cable Connect the LAN cable. Connecting a USB device Connections

Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from oneoperating system to another. Follow the directions appropriate for the oper-ating system you have. Prep...

5. Set a Keyboard for your computer. 6. The next screen is for setting your monitor. 7. First of all, set a horizontal frequency for your monitor. (You can enter the frequencydirectly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.) 9. Enter the model name of y...

Uninstall The MDC program can be removed only by using the "Add or Remove Programs" option ofthe Windows ® Control Panel. Perform the following steps remove MDC. Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a pro-gram". Select M...

1. The Multiple Display Control is originally set to COM1.2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu.3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. Th...

Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - Turns the power of the selected display On/Off. 2) Volume - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets and displays it in the s...

The Input Source Control feature is available only for the displays whose power status is ON. Image Size PC, BNC, DVI 1. Click Image Size of the main icons and the Image Size control screen appears. Info Grid shows some basic information necessary to Image Size Control. 1) ( Power Status) - Shows th...

Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV 1. Click Image Size of the main icons and the Image Size control screen appears. Info Grid shows some basic information necessary to Image Size Control. 1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Component, DVI(...

1. Click Time of the main icons and the Time Control screen appears. Info Grid shows some basic information necessary to Time Control. 1) Current Time - Set the current time for the selected display (PC Time).- To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour, Mi...

PIP Size 1. Click PIP of the main icons and the PIP control screen appears. Click Select All or use Check Box to select a display to control. Info Grid shows some basic information necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns off the P...

Settings Picture 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide.When selected, each function fetches th...

Image Lock 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display...

You may not operate this function in MagicInfo.The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON. Troubleshooting 1. The display you wish to control does not appear on the Power Control Info Grid - Check th...

Adjusting the LCD Display Input Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Source List MENU → ENTER → → ENTER → → , → ENTER Use to select PC , DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Co...

→ , → ENTER Adjusts the Transparency of PIP windows. • High • Medium • Low • Opaque Note • PIP turns off when the LCD Display is switched to an external source. • For PC and DVI , this is deactivated if the cable is disconnected. Edit Name MENU → ENTER → → ENTER → → → → , → ENTER Name the input devi...

→ , → ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available when Dynamic Contrast is set to On .) 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool2 , Cool1 , Normal , Warm1 , or Warm2 , the Color Temp...

→ , → ENTER The Size can be switched. 1. 16:9 : Sets the picture to 16:9 wide mode. 2. Zoom 1 : Magnifies the size of the picture on the screen. 3. Zoom 2 : Magnifies the size of the picture more than Zoom 1 . 4. 4:3 : Sets the picture to 4:3 normal mode. 5. Screen Fit : Displays the input scenes as...

Custom The sound settings can be adjusted to suit your personal preferences. MENU → → → ENTER → → → ENTER → Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. Bass MENU → → → ENTER → → → ENTER → → ENTER → → , →...

7. 180 On Timer MENU → → → → ENTER → → → ENTER → → → → ENTER → → , / , → ENTER Turns the LCD Display on automatically at a preset time. Controls the mode and the volumelevel at the time the LCD Display turns on automatically. Off Timer MENU → → → → ENTER → → → ENTER → → → → → ENTER → → , / , → ENTER...

3. Low 4. Opaque Safety Lock Change PIN MENU → → → → ENTER → → → → → ENTER → → EN- TER → → [0 ∼ 9] → [0 ∼ 9] → [0 ∼ 9] → [0 ∼ 9] The password can be changed. Note The preset password for the LCD Display is "0000". Lock On MENU → → → → ENTER → → → → → ENTER → → → ENTER → → [0 ∼ 9] → [0 ∼ 9] →...

1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU → → → → ENTER → → → → → → → → ENTER → → → → ENTER → → , → ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, ...

The screen can be divided into several images. A number of screens can be selected with adifferent layout when dividing. • Select a mode in Screen Divider. • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Scre...

→ , → ENTER Select the brightness of the grey for the screen background. 1. Off 2. Light 3. Dark Resolution Select MENU → → → → ENTER → → → → → → → → → → ENTER → → , → ENTER When the picture is not displayed properly on the screen when setting the graphics cardresolution of the computer to 1024 x 76...

Power On Adjustment MENU → → → → ENTER → → → → → → → → → → → ENTER → → , → ENTER Adjusts the Power On time for the screen. OSD Rotation MENU → → → → ENTER → → → → → → → → → → → → → → → ENTER → → , → ENTER OSD Rotate 1. Landscape 2. Portrait Reset Reverts the product settings to factory defaults. The...

Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center forproblems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back o...

• Do not use benzene, thinner or other flammable sub-stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screensurface.) • The user is responsible for any damage caused b...

A: Check if the signal cable between the computer and the LCD Display is securely con-nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensu...

Specifications General General Model Name SyncMaster 820DXN-2 LCD Panel Size 82 inches (207 cm) Display area 1805.76 mm (H) x 1015.74 mm (V) Pixel Pitch 0.9405 mm (H) x 0.9405 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 85 Hz Display Color 16.7 M Resolution Optimum resolu-tion 1920 x...

State Normal Opera- tion Power saving mode Power off (Power-switch) Power Con- sumption 820DXN-2 920 watts Less than 5 watts Less than 0 watts Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes,the screen will be adjusted automatically. H...

Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have anuneven picture quality on screen if the best picture quality is not provided for TFT-LCD. • Resolution: 1920 x 1...

Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact theSAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAM...

CIS http://www.samsung.com/ua_ru UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com/kz_ru Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 400-810-5858 010-6475 1880 http://www.samsung.com/cn HONG KONG 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/hk_en/ INDIA 30...

Vertical Frequency The screen must be redrawn several times per second inorder to create and display an image for the user. The fre-quency of this repetition per second is called the VerticalFrequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per sec-ond, this is r...

Correct disposal of batteries in this product - Europe only (Applicable in the European Union and other European countries withseparate battery return systems.) This marking on the battery, manual or packaging indicates that the bat-teries in this product should not be disposed of with other househo...