Samsung 7100 - Manuals - manualsarea.com

Page 3 - INTRODUCTION; Purpose; buttons of digital phone and cautions.; CHAPTER; Acronyms frequently used in this document are described.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications I INTRODUCTION Purpose This guide describes a programming method for the OfficeServ 7100 system users. OfficeServ 7100 allows you to utilize a digital phone to simply change the system setup. Likewise, using a phone to cha...

Page 4 - Conventions; WARNING; Indicates additional information as a reference.; Console Screen Output; The lined box with ‘; Bold Courier New; ’ font will indicate the value entered by the operator on the

Ошибка ! Стиль не определен . II Samsung Business Communications Conventions The following types of paragraphs contain special information that must be carefully read and thoroughly understood. Such information may or may not be enclosed in a rectangular box, separating it from the main text, but is...

Page 5 - Reference Guides; OfficeServ 7100 Installation Guide; wireless LAN provided by the OfficeServ 7100 system.; Revision History; EDITION; First Edition

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications III Reference Guides The following guides are also provided with your OfficeServ 7100 system. OfficeServ 7100 Installation Guide Describes the installation procedures and specifications for the OfficeServ 7100 system. Offi...

Page 6 - This page is intentionally left blank.

Ошибка ! Стиль не определен . IV Samsung Business Communications This page is intentionally left blank.

Page 7 - SAFETY CONCERNS; Symbols; Caution; Indication of a general caution; Restriction; Indication for prohibiting an action for a product; Instruction; Indication for commanding a specifically required action

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications V SAFETY CONCERNS For product safety and correct operation, the following information must be given to the operator/user and shall be read before the installation and operation. Symbols Caution Indication of a general caut...

Page 8 - Warning; Before using the Auto Record feature; Compliance with the National Version Standards

Ошибка ! Стиль не определен . VI Samsung Business Communications Warning Caution Before using the Auto Record feature Before using the Auto Record feature, make sure that you are not violating any laws. Samsung is not responsible for any illegal use of this feature. Caution CALL COST(MMC 508) Changi...

Page 9 - TABLE OF CONTENTS; INTRODUCTION I

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications VII TABLE OF CONTENTS INTRODUCTION I Purpose ...........................................................................................................................................I Audience ..............................

Page 10 - MMC Programming

Ошибка ! Стиль не определен . VIII © SAMSUNG Electronics Co., Ltd. 1.6.7 Diagnosis Function........................................................................................................1-27 1.6.8 Hotel Function ..................................................................................

Page 15 - ABBREVIATION I

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications XIII [835] MGI DSP OPTIONS ........................................................................................................2-307 [836] H.323 GK OPTIONS .................................................................

Page 16 - LIST OF FIGURES

Ошибка ! Стиль не определен . XIV © SAMSUNG Electronics Co., Ltd. LIST OF FIGURES Figure 1.1 24B LCD DCS Euro Phone ..................................................................................... 1-2 Figure 1.2 DS-5038S Phone .......................................................................

Page 17 - gramming; tons and cautions will be discussed.; Introduction to Programming; Program List by User’s Level; For more information about the programming level, refer to

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-1 CHAPTER 1. Overview of MMC Pro- gramming In this chapter, the things to know before you start MMC programming, and the phone but- tons and cautions will be discussed. 1.1 Introduction to Programming The MMC means the c...

Page 18 - Figure 1.1 24B LCD DCS Euro Phone; right column is numbered 13-24 from the top.; Buttons 19 to 24 are special buttons ‘A–F’; phone has 12 programmable buttons numbered 1-12 from top to bottom.; tons 7 to 12 are special buttons ‘A–F’ used for programming.; right column is numbered 4-6 from the top.; Buttons 1 to 3 are special buttons ‘A–C’ and

CHAPTER 1. Ошибка ! Стиль не определен . 1-2 Samsung Business Communications 1.2 Digital Phones You need a digital display(LCD) phone in order to carry out programming. These include DCS Euro keysets and DS/ITP 5000 Series keysets, and some examples are described in the following sections. All use s...

Page 19 - Hold Button: Clear an entry in the display.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-3 The special buttons are referred to within the relevant MMCs. For example, button ‘A’ is used to toggle between uppercase and lowercase characters when entering text on the dis- play. All programmable buttons can be pr...

Page 22 - Using large LCD Phones; Cautions in Programming; Full programming can be done on any digital LCD phone.

CHAPTER 1. Ошибка ! Стиль не определен . 1-6 Samsung Business Communications Using large LCD Phones Large LCD phones(DS/ITP-5012L) do not have programmable buttons. Instead, they display programming functions on the LCD to be selected via the selection buttons. Refer to your keyset user guide for mo...

Page 23 - Programming can be done for only station level programs.; Table 1.1 Station Level Programming list

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-7 1.4 Program List by User’s Level The MMC program can be divided into programmable one and non-programmable one. The programmable MMC is classified into 3 levels, such as technician, operator, and sta- tion level. In th...

Page 24 - ACCESS MMC NUMBER.; Table 1.2 System Related MMC list

CHAPTER 1. Ошибка ! Стиль не определен . 1-8 Samsung Business Communications 1.4.2 Operator Level Programming A technician can do programming within the range set by the MMC [802] CUSTOMER ACCESS MMC NUMBER. Programming is allowed for any phone within the tenant group, but it can be done for only on...

Page 25 - Table 1.3 Station Related MMC list

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-9 1.4.2.2 Station Related MMC The MMC programs related to the function of the station are as follows: Table 1.3 Station Related MMC list MMC No. MMC Name MMC: 300 CUSTOMER ON/OFF PER STATION MMC: 301 ASSIGN STATION COS M...

Page 26 - Table 1.4 Trunk Related MMC list

CHAPTER 1. Ошибка ! Стиль не определен . 1-10 Samsung Business Communications 1.4.2.3 Trunk Related MMC The MMC programs related to the function of the trunk are as follows: Table 1.4 Trunk Related MMC list MMC No. MMC Name MMC: 400 CUSTOMER ON/OFF PER TRUNK MMC: 401 TRUNK LINE/PBX LINE MMC: 402 TRU...

Page 27 - Table 1.5 Timer and Tone Related MMC list; The MMC programs related to the function of a group are as follows:; Table 1.6 Group Related MMC list

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-11 1.4.2.4 Timer and Tone Related MMC The MMC programs related to the function of the timer and tone are as follows: Table 1.5 Timer and Tone Related MMC list MMC No. MMC Name MMC: 500 SYSTEM-WIDE COUNTERS MMC: 501 SYSTE...

Page 28 - MMC Name

CHAPTER 1. Ошибка ! Стиль не определен . 1-12 Samsung Business Communications Table 1.6 Group Related MMC list(continued) MMC No. MMC Name MMC: 614 STATION/TRUNK USE GROUP MMC: 615 MGI GROUP MMC: 616 MGI USER 1.4.2.6 Tables, Codes, AA, DECT and VM MMC The MMC programs related to the function of the ...

Page 30 - Technician Level Programming; This level is allowed to program every level of program.; Table 1.8 Technician Level Programming list

CHAPTER 1. Ошибка ! Стиль не определен . 1-14 Samsung Business Communications 1.4.3 Technician Level Programming This level is allowed to program every level of program. This level of programming can be done on every phone within the system, but it can be done for only one phone at a time. Table 1.8...

Page 32 - Programming List by Name; This programming list is arranged alphabetically; Table 1.9 Alphabetically arranged Programming list

CHAPTER 1. Ошибка ! Стиль не определен . 1-16 Samsung Business Communications 1.5 Programming List by Name This programming list is arranged alphabetically Table 1.9 Alphabetically arranged Programming list MMC Name MMC No. ACCOUNT CODE MMC: 708 ALARM AND MESSAGE MMC: 116 ALARM REMINDER CLOCK MMC: 1...

Page 33 - Table 1.9 Alphabetically arranged Programming list(continued)

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-17 Table 1.9 Alphabetically arranged Programming list(continued) MMC Name MMC No. ASSIGN SYSTEM LINK ID MMC: 820 ASSIGN SYSTEM REFERENCE CLOCK MMC: 826 ASSIGN SYSTEM SPEED DIAL MMC: 705 ASSIGN TRUNK GROUP MMC: 603 ASSIGN...

Page 39 - Program List by Function; Function; Table 1.10 Phone Function Programming list

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-23 1.6 Program List by Function This section describes MMC programs are classified by the function of the OfficeServ 7100. 1.6.1 Phone Function The MMC programs related to the function of a phone that is connected with t...

Page 40 - Table 1.11 Networking Function Programming list; Table 1.12 VoIP Function Programming list

CHAPTER 1. Ошибка ! Стиль не определен . 1-24 Samsung Business Communications 1.6.2 Networking Function The MMC programs related to the function of networking are as follows: Table 1.11 Networking Function Programming list MMC Program No. Program Description MMC: 820 ASSIGN SYSTEM LINK ID MMC: 821 A...

Page 41 - Program Description; Table 1.13 WLAN Function Programming list

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-25 Table 1.12 VoIP Function Programming list(continued) MMC Program No. Program Description MMC: 835 MGI DSP OPTIONS MMC: 836 H.323 GK OPTIONS 1.6.4 WLAN Function The MMC programs related to the function of WLAN(Wireless...

Page 42 - Table 1.15 Auto Attendant/Voice Mail Function Programming list

CHAPTER 1. Ошибка ! Стиль не определен . 1-26 Samsung Business Communications 1.6.6 Auto Attendant/Voice Mail Function The MMC programs related to the function of AA(Auto Attendant) or VM(Voice Mail) are as follows: Table 1.15 Auto Attendant/Voice Mail Function Programming list MMC Program No. Progr...

Page 43 - Table 1.16 Diagnosis Function Programming list; The MMC programs related to the function of a hotel are as follows:; Table 1.17 Hotel Function Programming list

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 1-27 1.6.7 Diagnosis Function The MMC programs related to the function of diagnosing the system are as follows: Table 1.16 Diagnosis Function Programming list MMC Program No. Program Description MMC: 434 CONNECTION STATUS ...

Page 45 - of Programming Procedure

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-1 CHAPTER 2. MMC Programming This chapter describes how to use each MMC program as it was listed. 2.1 Overview of Programming Procedure The order of programming will be discussed before explaining programming method of e...

Page 46 - Programming Procedure; corresponding to the MMC.; No; UNLOCKED; CONDITIONS; tor Level Programming or Technician Level Programming.; DEFAULT DATA; ALL STATIONS UNLOCKED

CHAPTER 2. Ошибка ! Стиль не определен . 2-2 Samsung Business Communications 2.2 Programming Procedure This section describes a procedure of each program. Refer to the programming procedure corresponding to the MMC. [100] STATION LOCK Allows the system administrator or technician to lock or unlock a...

Page 47 - ACTION DISPLAY; RELATED ITEMS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-3 ACTION DISPLAY 1) Press Transfer button and enter 100. Display shows: [201] STN LOCK UNLOCKED 2) Dial station number.(e.g., 205) OR [205] STN LOCK UNLOCKED Press Volume button to select station and press Right Soft but...

Page 48 - Default

CHAPTER 2. Ошибка ! Стиль не определен . 2-4 Samsung Business Communications [101] CHANGE USER PASSCODE Allows the system administrator or technician to reset any phone’s passcode to its default value of ‘1234’. This MMC cannot display station passcodes; it can only reset them to de- fault. Phone us...

Page 51 - have its answer mode set to one of the following options:

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-7 [103] SET ANSWER MODE Allows the system administrator to change the answer mode of any phone. Each phone can have its answer mode set to one of the following options: No Type Description 0 RING MODE The phone will ring...

Page 52 - RING MODE

CHAPTER 2. Ошибка ! Стиль не определен . 2-8 Samsung Business Communications ACTION DISPLAY 1) Press Transfer button and enter 103. Display shows: [201] ANS MODE RING MODE 2) Dial phone number.(e.g., 205) OR [205] ANS MODE RING MODE Press Volume button to select phone and press Right Soft button to ...

Page 53 - tify an individual station.; ENTERING CHARACTERS; your message. Pressing; ‘A’ button; toggles between upper case and lower case.; Volume; The # button can be used for the following special characters:; NONE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-9 [104] STATION NAME Allows the system administrator or technician to enter a name up to 11 characters to iden- tify an individual station. ENTERING CHARACTERS Names are written using the keypad. Each key press selects a...

Page 54 - SAM SMITH

CHAPTER 2. Ошибка ! Стиль не определен . 2-10 Samsung Business Communications ACTION DISPLAY 1) Press Transfer button and enter 104. Display shows: [201] STN NAME 2) Dial station number.(e.g., 205) OR [205] STN NAME _ Press Volume button to select station and press Right Soft button to move cursor. ...

Page 55 - SPDBLK NOT EXIST

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-11 [105] STATION SPEED DIAL Allows the system administrator or technician to assign phone numbers to a station’s per- sonal speed dial locations. CONDITIONS Each station may have up to 50 locations(or bins) assigned to i...

Page 58 - Key

CHAPTER 2. Ошибка ! Стиль не определен . 2-14 Samsung Business Communications [107] KEY EXTENDER Use this program to view the programmable buttons assigned to stations. In addition, it al- lows the system administrator to assign key extenders to some keys to make a general ac- cess feature key more ...

Page 59 - When using the Right Soft button

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-15 ACTION DISPLAY 1) Press Transfer button and enter 107. Display shows first station: [201] EXT (MAST) 01:CALL1 Æ 2) Dial station number.(e.g., 205) OR [205] EXT (MAST) 01:CALL1 Æ Use Volume button to scroll through sta...

Page 61 - ASSIGN STATION COS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-17 RELATED ITEMS MMC 301 ASSIGN STATION COS MMC 302 PICKUP GROUPS MMC 303 ASSIGN BOSS/SECRETARY MMC 601 ASSIGN STATION GROUP MMC 604 ASSIGN STATION TO PAGE ZONE

Page 63 - ) Press Transfer button to save and exit.; ASSIGN DATE AND TIME

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-19 5) Press Transfer button to save and exit. OR Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 505 ASSIGN DATE AND TIME

Page 67 - SELECTION 5

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-23 [111] PHONE RING TONE Allows the system administrator or technician to select the ring tone heard at each phone. Eight ring tones are available. A short tone burst of the selection will be heard when the dial keypad i...

Page 68 - NOTSET

CHAPTER 2. Ошибка ! Стиль не определен . 2-24 Samsung Business Communications [112] ALARM REMINDER CLOCK Allows the system administrator or technician to set or change the alarm clock/appointment reminder feature for any station. Three alarms may be set for each station and each alarm may be defined...

Page 69 - ALARM AND MESSAGE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-25 RELATED ITEMS MMC 116 ALARM AND MESSAGE

Page 70 - ENTER CHARACTERS

CHAPTER 2. Ошибка ! Стиль не определен . 2-26 Samsung Business Communications [113] VIEW MEMO NUMBER Allows a station user the ability to view a memo left by the user. A memo can be left by en- tering it via the dial keypad using the table below. A memo of up to and including 13 char- acters can be ...

Page 71 - for any or all phones.; RING VOLUME

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-27 [114] PHONE VOLUME Allows the station user or system administrator to set the ring volume, off-hook ring vol- ume, handset receive volume, speaker volume, background music volume and page volume for any or all phones....

Page 73 - CANCEL PGM MSG

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-29 [115] SET PROGRAMMED MESSAGE Allows the system administrator to set a programmed message at any or all display phones. There are 20 messages(01-20) available. The last five message can be modified by each phone user. ...

Page 75 - DAILY

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-31 5) Dial valid entry from above list for alarm type. (e.g., 2) [205] ALM REM HHMM:1300 Æ DAILY OR Press Volume button to select alarm type and press Right Soft button to move cursor. 6) Enter message and press Right So...

Page 76 - Blank Message

CHAPTER 2. Ошибка ! Стиль не определен . 2-32 Samsung Business Communications [117] EDIT TEXT MESSAGE Allows the system administrator or technician to set or change text messages for any sta- tion. One station can use up to 10 text messages. CONDITIONS Only stations allowed to use text messages in M...

Page 78 - ) Enter conference member dial number and; ALLOW GROUP CONFERENCE

CHAPTER 2. Ошибка ! Стиль не определен . 2-34 Samsung Business Communications 5) Enter conference member dial number and press Right Soft button to return to step 4. [205] GRP(1)MBR1 9-2794296 6) Press Transfer button to save and exit. OR Press Speaker button to save and advance to next MMC. RELATED...

Page 79 - NO DISPLAY; NUMBER FIRST

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-35 [119] CALLER ID DISPLAY Allows the technician to set the individual station display preference on a per-station basis. Caller ID or CLI can be selected to either show the name, number first, or no display de- pending ...

Page 80 - CALENDER

CHAPTER 2. Ошибка ! Стиль не определен . 2-36 Samsung Business Communications [120] LARGE LCD OPTIONS Allows the system administrator to set any of the following options for large LCD phones. No Option Description 0 IDLE DISPLAY Sets whether to display ‘ CALENDAR ’ or ‘ INFORMATION ’ on LCD when idl...

Page 81 - ) Press Volume button to select display type and press Right; EXT NAME; MMC 719 IDLE DISPLAY

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-37 4) Press Volume button to select display type and press Right Soft button. [203] DS KEY DSP EXT NAME 5) Press Transfer button to save and exit. OR Press Speaker button to save and advance to next MMC. RELATED ITEMS MM...

Page 82 - ENGLISH

CHAPTER 2. Ошибка ! Стиль не определен . 2-38 Samsung Business Communications [121] PHONE LANGUAGE Allows the system administrator to assign an LCD display based on the user’s own lan- guage. No Language 00 ENGLISH 01 GERMAN 02 PORTUGAL 03 NORSK 04 DANISH 05 DUTCH 06 ITALY 07 SPANISH 08 SWEDISH 09 S...

Page 85 - EXEC STATE; IN THE ROOM

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-41 [125] EXECUTIVE STATE Allows the system administrator or technician to set an executive station’s options, as fol- lows. No Option Description 0 EXEC STATE When working with EASYSET, the state of the executive station...

Page 87 - SHOW LICENSE STS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-43 [199] SHOW LICENSE STATUS Allows the system administrator or technician to confirm the status(Valid or Invalid) of the inserted license key. No Feature Description 0 MGI MAX The license status for MGI port 1 VMS MAX T...

Page 88 - DISABLE

CHAPTER 2. Ошибка ! Стиль не определен . 2-44 Samsung Business Communications [200] OPEN CUSTOMER PROGRAMMING Used to open(enable) and close(disable) customer-level programming. If programming is not opened and an attempt is made to access a system MMC, the error message [NOT PERMIT] will be display...

Page 90 - CHANGE PASSCODE

CHAPTER 2. Ошибка ! Стиль не определен . 2-46 Samsung Business Communications [202] CHANGE FEATURE PASSCODE Used to change the passcodes for the following features. No Feature Description 0 RING PLAN The passcode required to place the system in different Ring Plans(RP) or change the Ring Time Overri...

Page 91 - ) Press Transfer button to save and exit.; ASSIGN DISA TRUNK

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-47 4) Press Transfer button to save and exit. OR Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 410 ASSIGN DISA TRUNK MMC 507 ASSIGN RING PLAN TIME

Page 92 - Ringing Device; ASSIGN UA PORT

CHAPTER 2. Ошибка ! Стиль не определен . 2-48 Samsung Business Communications [203] ASSIGN UA DEVICE Assigns ringing device to be accessed when a Universal Answer(UA) key is pressed or the UA pickup code is dialled. UA assignment is made in MMC 601, Assign Station Group, for a group and then the gro...

Page 93 - CONTINUOUS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-49 [204] COMMON BELL CONTROL Determines whether the common bell relay contacts have an interrupted or continuous clo- sure when activated. If interrupted is chosen, the relay follows an internal Trunk Line ring pattern o...

Page 95 - WITH TONE; BARGE IN TYPE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-51 [206] BARGE-IN TYPE Sets the type of barge-in that is permitted. No Type Description 0 NO BARGE-IN Barge-in feature is unavailable regardless of a station’s barge-in status. 1 WITH TONE Barge-in will have an intrusion...

Page 96 - NORMAL PORT

CHAPTER 2. Ошибка ! Стиль не определен . 2-52 Samsung Business Communications [207] ASSIGN VM/AA PORT Enables SLI ports to be designated as NORMAL or VM/AA. VM/AA ports receive digits and also receive a true disconnect signal on completion of a call. Only SLI cards, not key-set daughter-boards, supp...

Page 97 - ICM RING

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-53 [208] ASSIGN RING TYPE Allows programming of single lines to have ICM ringing, Trunk Line ringing and data se- cure. With the many types of external ringing devices, all configurations can be met. All devices will als...

Page 105 - DISA ALARM RING

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-61 [214] DISA ALARM RINGING STATION Assigns the DISA alarm to ring at a specific phone. It is recommended that the person who can clear the alarm also receives the notification. CONDITIONS y A valid destination can be ei...

Page 106 - When report; MANUAL PRINT OUT; When; AUTO PRINT OPTN; AUTO PRINT OFF

CHAPTER 2. Ошибка ! Стиль не определен . 2-62 Samsung Business Communications [217] TRAFFIC REPORT OPTION This MMC is used to print a traffic report and select options. The traffic report can be printed on demand, or every hour, or at a programmed time each day, or for up to three separately-timed s...

Page 108 - EXTERNAL PAGE

CHAPTER 2. Ошибка ! Стиль не определен . 2-64 Samsung Business Communications [219] RELAY TYPE Assigns the service type of three relay ports of misc card. Service consists of External Page, Common bell , loud bell, NOT USED. DEFAULT DATA External Page ACTION DISPLAY 1) Press Transfer button and ente...

Page 109 - VOICE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-65 [220] ISDN SERVICE TYPE Assigns the ISDN service type of a single line telephone port. Service consists of BC (Bearer Capability) and HLC(High Layer Capability). No Type Description BC HLC 0 VOICE Voice service Speech...

Page 110 - NORMAL STATION

CHAPTER 2. Ошибка ! Стиль не определен . 2-66 Samsung Business Communications [221] EXTENSION TYPE This MMC assigns station ports for a specific use. Each phone can be designated as one of five types(see table). These types can be changed by dialling the type number or by scroll- ing through the typ...

Page 111 - GUEST NO SMOKING

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-67 3) Dial 0 - 5 to select station type. OR [214] PHONE USE GUEST NO SMOKING Press Volume button to select option and press Right Soft button. 4) Press Transfer button to save and exit. OR Press Speaker button to advance...

Page 113 - AA GROUP

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-69 [224] WAKE-UP ANNOUNCEMENT This MMC is an enhanced Wake Up feature. The system will play a recorded message when a Wake Up call is answered by the user. The Wake Up Announcement feature re- quires an SVMi-20 card to b...

Page 127 - LCR CLASS 1

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-83 [310] LCR CLASS OF SERVICE Assigns the LCR class of service allowed on a per-station/per-trunk basis. There are eight classes which may be assigned. LCR class of service allows specific users to ‘trunk ad-vance’ up to...

Page 128 - Option; RCV

CHAPTER 2. Ошибка ! Стиль не определен . 2-84 Samsung Business Communications [312] ALLOW CALLER ID Allows the system administrator or technician to allow or deny CID data to be sent from, or displayed at, LCD phones. Option Description RCV Set whether to display CID. SND Set whether to send CID for...

Page 130 - SET RELOCATION

CHAPTER 2. Ошибка ! Стиль не определен . 2-86 Samsung Business Communications [315] CUSTOMER SET RELOCATION Customer Set Relocation allows the system administrator or technician to exchange similar stations in the system without hardware changes. All the button settings, features, etc. for a phone c...

Page 131 - iDCS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-87 Relocate Allowed Table SLT EURO 6B EURO 12B EURO 24B 48B AOM 64B AOM iDCS 28D iDCS 18D SLT YES NO NO NO NO NO NO NO EURO 6B NO YES NO NO NO NO NO NO EURO 12B NO NO YES YES NO NO NO NO EURO 24B NO NO YES YES NO NO NO N...

Page 132 - IP

CHAPTER 2. Ошибка ! Стиль не определен . 2-88 Samsung Business Communications Relocate Allowed Table iDCS 8D DS- 5012L DS- 5014D DS- 5021D DS- 5007S DS- 5014S DS- 5038S IP Phone* SLT NO NO NO NO NO NO NO NO EURO 6B NO NO NO NO NO NO NO NO EURO 12B NO NO NO NO NO NO NO NO EURO 24B NO NO NO NO NO NO N...

Page 135 - perform a similar function for SLTs.; Calls will ring with the keyset user’s choice of ring frequency.; the bell rings according to the designated ring tone.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-91 [318] DISTINCTIVE RINGING Allows the technician to select the ring tone heard at a keyset when called by a specific sta- tion or when a specific trunk rings that keyset. There is also a cadence control option to perfo...

Page 137 - MMC; This MMC is currently not valid in the UK/EU.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-93 [319] BRANCH GROUP Assign stations to branch groups. There is a maximum of four branch groups. When a C.O. line is ringing at a station, other stations assigned the same branch group can answer the in- coming call by ...

Page 138 - Preset FNA can be assigned respectively for each type of call.

CHAPTER 2. Ошибка ! Стиль не определен . 2-94 Samsung Business Communications [320] PRESET FORWARD NO ANSWER Allows a technician to assign a default destination for Forward No Answer(FNA) to each station on the system. These destinations may be the same or different for each station. The preset FNA ...

Page 144 - CO LINE

CHAPTER 2. Ошибка ! Стиль не определен . 2-100 Samsung Business Communications [401] TRUNK LINE/PBX LINE Used to select the mode of the trunk lines: CO LINE or PBX LINE. If PBX mode is chosen, this allows PBX access codes to be recognized, thus allowing more complete toll restriction. (call barring)...

Page 145 - DTMF TYPE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-101 [402] TRUNK DIAL TYPE Used to determine the dialling type of each trunk line. There are two options: No Type Description 0 DTMF TYPE Dual Tone Multi-Frequency 1 DIAL PULSE TYPE Dial Pulse DEFAULT DATA ALL TRUNKS: DTM...

Page 148 - TELECOMS

CHAPTER 2. Ошибка ! Стиль не определен . 2-104 Samsung Business Communications [404] TRUNK NAME Allows a name up to 11 characters long to be entered to identify an individual trunk. ENTERING CHARACTERS Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME. DEFAULT DATA NONE ACTION DISPLAY 1) Press...

Page 149 - ENTERING NUMBERS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-105 [405] TRUNK CO TEL NUMBER Allows a number up to 11 digits long to be entered to identify an individual trunk. ENTERING NUMBERS Numbers are written using the keypad. Each press of a key selects the digit and moves the...

Page 156 - IMMEDIATE START

CHAPTER 2. Ошибка ! Стиль не определен . 2-112 Samsung Business Communications [412] ASSIGN TRUNK SIGNAL Allows the assignment of analogue DID or E & M cards for proper signalling. These trunks can also use the translation tables in MMC 714. No Signalling condition type 0 IMMEDIATE START 1 DELAY...

Page 157 - Type; MPD

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-113 [414] MPD/PRS SIGNAL Used on a per-trunk basis to define if a Trunk line is to be either a Metering Pulse Detec- tion(MPD) or a Polarity Reversal Signal(PRS) trunk. An MPD Trunk will detect a C.O-provided meter pulse...

Page 160 - ON

CHAPTER 2. Ошибка ! Стиль не определен . 2-116 Samsung Business Communications [417] E1/PRI CRC4 OPTION This option is used to enable/disable CRC4 generation and checking. CONDITIONS y This is useful with some networks which do not support CRC4 framing but only PCM30 framing. y After changing this o...

Page 162 - whether the BRI is programmed as a trunk or station in MMC 423.; OPTIONS FOR BRI PORTS PROGRAMMED AS TRUNKS

CHAPTER 2. Ошибка ! Стиль не определен . 2-118 Samsung Business Communications [419] BRI OPTIONS Assigns several options on a per-BRI basis. There are different options depending on whether the BRI is programmed as a trunk or station in MMC 423. OPTIONS FOR BRI PORTS PROGRAMMED AS TRUNKS No Option D...

Page 163 - OPTIONS FOR BRI PORTS PROGRAMMED AS STATIONS; For BRI Ports programmed as Trunks:

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-119 (continued) No Option Description NB PLAN Used to select the type of the Calling Party Number Plan to send to the net-work. UNKNOWN Unknown numbering plan ISDN ISDN numbering plan(CCITT E.163-164) DATA Data numbering...

Page 165 - CALLING PARTY NUMBER

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-121 RELATED ITEMS MMC 323 CALLING PARTY NUMBER MMC 405 TRUNK CO TEL NUMBER MMC 418 BRI & PRI CARD RESTART MMC 421 MSN DIGIT MMC 423 S/T MODE MMC 714 DID NAME AND NUMBER TRANSLATION

Page 166 - This MMC allows the technician to program a PRI trunk card.

CHAPTER 2. Ошибка ! Стиль не определен . 2-122 Samsung Business Communications [420] PRI OPTIONS This MMC allows the technician to program a PRI trunk card. No Option Description 0 CHANNEL ANY When this option is set to YES, the system will place calls on any free channel of that PRI if the channel ...

Page 171 - TRUNK

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-127 [423] S/T MODE Allows the technician to select whether a BRI circuit is a station port or a trunk port. No Type Description 0 TRUNK The BRI trunk port used for ISDN trunk. 1 STATION The BRI trunk port used for ISDN p...

Page 173 - NORMAL TRUNK

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-129 [425] CID TRUNKS This MMC assigns a TRUNK number to a CID TRUNK. CONDITIONS This function can be used only when the TRM or trunk card is installed in the system. DEFAULT DATA NORMAL TRUNK ACTION DISPLAY 1) Press Tran...

Page 176 - DID

CHAPTER 2. Ошибка ! Стиль не определен . 2-132 Samsung Business Communications [432] SET H-TRK This MMC is used to select the type of signalling for each H- trunk. There are three opera- tion types available.(E & M, DID, R/D) DEFAULT DATA E & M ACTION DISPLAY 1) Press Transfer button and ent...

Page 178 - Display trunk connection status

CHAPTER 2. Ошибка ! Стиль не определен . 2-134 Samsung Business Communications [434] CONNECTION STATUS This read-only MMC will confirm the connection status of stations or trunks. Display status displays the status of a station or trunk at the time requested. If a conference is in progress with the ...

Page 179 - Display trunk status in conference

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-135 Display trunk status in conference 1) Press Transfer button and enter 434. DISPLAY STATUS 201 IDLE 2) Enter station or trunk number. Display shows connection status: DISPLAY STATUS 702 227 ,215 Æ 3) Press Right Soft ...

Page 180 - Display connection status with invalid trunk

CHAPTER 2. Ошибка ! Стиль не определен . 2-136 Samsung Business Communications Display connection status with invalid trunk or station number 1) Press Transfer button and enter 434. DISPLAY STATUS 201 IDLE 2) Enter invalid station or trunk number Display show INVALID DATA: DISPLAY STATUS INVALID DAT...

Page 183 - SEE DESCRIPTION

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-139 [500] SYSTEM-WIDE COUNTERS Used to set the values of the system counters. The counters are listed below with a brief de- scription of each. No Counter Default Description 0 ALARM REM. CNTER 5 The number of times that...

Page 184 - UCDS AUDIO ALARM

CHAPTER 2. Ошибка ! Стиль не определен . 2-140 Samsung Business Communications ACTION DISPLAY 1) Press Transfer button and enter 500. Display shows: ALARM REM.CNTER 05 Æ 2) Enter number from above list.(e.g., 6) OR UCDS AUDIO ALARM 00 Æ Press Volume button to make selection and press Right Soft butt...

Page 185 - Allows the technician to adjust individual timers as necessary.; TIMER TABLE; Timer Name

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-141 [501] SYSTEM TIMERS Allows the technician to adjust individual timers as necessary. TIMER TABLE Timer Name Default Range Unit Description ALARM TIME 100 0-2500 MIN This is the time the system alarm key will start rin...

Page 189 - TRANSFER RECALL; When timers value is; Some timers are disabled when their value is set to

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-145 (continued) Timer Name Default Range Unit Description TRANSFER RECALL 20 0-250 SEC This timer determines how long transferred calls ring before recalling. This is a system-wide timer. TRK AUTOMOH DISC 60 1-250 SEC Wh...

Page 190 - AA INT DGT TIME

CHAPTER 2. Ошибка ! Стиль не определен . 2-146 Samsung Business Communications ACTION DISPLAY 1) Press Transfer button and enter 501. Display shows first timer value: AA INT DGT TIME 05 SEC Æ 2) Press Volume button to select timer and press Right Soft button to move cursor. KMMC LOCK OUT TM 060 SEC ...

Page 191 - CC RNG DLY

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-147 [502] STATION-WIDE TIMERS Allows certain station timer values to be changed on a per-station basis or for all stations. No Item Description 0 NO ANS FWD This timer controls how long the station will ring before Forwa...

Page 194 - DISA ANSWR

CHAPTER 2. Ошибка ! Стиль не определен . 2-150 Samsung Business Communications (continued) No Item Description Range 13 DISA ANSWR This is a delay time to answer the DISA trunk call or to answer the trunk when TRK AUTO ANSWER is set to ON(MMC400). 0-9 SEC 14 CONN DELAY This is the delay time to conn...

Page 196 - PULSE PER SECOND

CHAPTER 2. Ошибка ! Стиль не определен . 2-152 Samsung Business Communications [504] PULSE MAKE/BREAK RATIO Allows the ability to change the value of pulses per second and the duration of the make/break time. This will only affect rotary dial trunks. No Item Description 0 MAKE/BREAK RATIO Make/Break...

Page 197 - Day

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-153 [505] ASSIGN DATE AND TIME Allows the system date and time to be set. This will set the system-wide clock. Type Description Range YY Year 00-99 MM Month 01-12 DD Date 01-31 W Day 0-6(0: SUN, 1: MON, 2: TUE, 3: WED, 4...

Page 198 - tem can be detected.

CHAPTER 2. Ошибка ! Стиль не определен . 2-154 Samsung Business Communications [506] TONE CADENCE Provides the ability to customize the tone cadence on a system-wide basis. The system pro- vides 11 types of tone and three types of tone provided from Central Office or a PBX sys- tem can be detected. ...

Page 199 - TONE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-155 (unit: milliseconds) TONE ON OFF ON OFF DND/NO MORE TONE 250 250 250 250 ERROR TONE 500 500 500 500 HOLD/CAMP-ON TONE 500 3500 500 3500 MESSAGE WAIT TONE 1000 250 1000 250 RING BACK TONE 400 200 400 2000 RING TONE 10...

Page 200 - time the system will switch from that plan to the previous plan.; RING PLAN; previous Ring Plan.

CHAPTER 2. Ошибка ! Стиль не определен . 2-156 Samsung Business Communications [507] ASSIGN RING PLAN TIME Use this MMC to program Ring Plans time settings. Ring Plans provide six separate ring- ing destinations based on day of the week and time of day. The start time within a plan is the time the s...

Page 201 - Ring Plan 1

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-157 Ring Plan 1 Ring Plan 1 is the default Ring Plan for each day. If no Ring Plan destination is entered, the operator group is the default destination. DEFAULT DATA START: NONE END: NONE ACTION DISPLAY 1) Press Transfe...

Page 202 - CALL COST; UNIT COST PER MP

CHAPTER 2. Ошибка ! Стиль не определен . 2-158 Samsung Business Communications [508] CALL COST Set the Call Cost attributes generated by the system during a call. This information can be displayed on the phone during a call or as an SMDR record. No Display Description 0 UNIT COST PER MP When the sys...

Page 205 - MW LAMP CADENCE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-161 [511] MSG WAITING LAMP CADENCE This MMC defines the cadence(flash rate) of single line telephone message waiting lamps on phones connected to systems with an MWSLI card. There are two choices for the MW lamp cadence:...

Page 207 - CHECK OUT TIME

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-163 [513] HOTEL TIMER This MMC is where the Hotel timers for guest-rooms are set. These are system-wide timers that affect all rooms. Refer to your Hotel documentation for more details. No Item Description 0 CHECK OUT TI...

Page 208 - BUSY TONE

CHAPTER 2. Ошибка ! Стиль не определен . 2-164 Samsung Business Communications [514] TONE SOURCE This program can assign an external tone source(e.g., a music source) instead of the normal system tone(TONE) for certain calls. The tones that can be changed are: No Type 0 BUSY TONE 1 DIAL TONE 2 DND T...

Page 210 - OPERATOR GROUP

CHAPTER 2. Ошибка ! Стиль не определен . 2-166 Samsung Business Communications [600] ASSIGN OPERATOR GROUP Used to assign an operator group for each ring plan. DEFAULT DATA RING PLAN 1-6: 500 ACTION DISPLAY 1) Press Transfer button and enter 600. Display shows: OPERATOR GROUP 1:500 2:500 2) Dial the...

Page 211 - The options for setting up these groups are as follows:

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-167 [601] ASSIGN STATION GROUP This MMC is used to build all station groups. There are 40 programmable groups available. The options for setting up these groups are as follows: No Option Description 0 TYPE This is the ty...

Page 217 - Trunk group

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-173 [603] ASSIGN TRUNK GROUP Allows the assignment of trunks to a specific trunk group or to several trunk groups. This is useful in the programming of LCR when more than one trunk is to be in several dialling plans. The...

Page 218 - LCR PROGRAMMING

CHAPTER 2. Ошибка ! Стиль не определен . 2-174 Samsung Business Communications 5) Enter valid trunk number.(e.g., 729) OR [9] TRK GROUP MEMBER 01:729 Press Volume button to make selection and press Right Soft button to return to step 2. 6) Repeat steps 1-5 to remove trunk from group 9 if necessary. ...

Page 223 - The following program options apply:

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-179 [607] UCD OPTIONS Sets up UCD options when an AA card has been installed. MMC 601 must have already been used to define a UCD group with an overflow destination of an AA port or group. (A group is preferred over a po...

Page 225 - AUTO LOG OUT; ALL OUT TO FINAL: OFF

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-181 (continued) No Option Description 09 AUTO LOG OUT This YES/NO option determines if a station will automatically log out of the UCD group when the RING NEXT timer expires. This setting will be ignored if the RING NEXT...

Page 229 - USED

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-185 [611] ALLOW TEXT MESSAGING This program allows stations to send text messages to other stations if they are busy or dur- ing an OHVA. Up to 20 stations can be allowed text messaging. DEFAULT DATA y NOT USED(no text m...

Page 231 - STATION GROUP

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-187 [614] STATION/TRUNK USE GROUP This program allows you to assign stations to station use groups and trunks to trunk use groups. This is useful if you want to restrict calling between stations, outgoing calls through a...

Page 235 - COPY COS ITEMS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-191 [700] COPY COS CONTENTS This MMC allows the technician to duplicate classes of service. DEFAULT DATA NONE PROGRAM BUTTONS ‘F’ KEY Used to advance to MMC 701 ACTION DISPLAY 1) Press Transfer button and enter 700. Disp...

Page 236 - There are 30 classes of service available.

CHAPTER 2. Ошибка ! Стиль не определен . 2-192 Samsung Business Communications [701] ASSIGN COS CONTENTS Similar to MMC 700 but does not allow a copy command. This MMC is primarily used for creating a new class of service(COS). If the unsupervised conference feature is allowed, a programmed CONF key...

Page 244 - SYS SPEED DIAL

CHAPTER 2. Ошибка ! Стиль не определен . 2-200 Samsung Business Communications [705] ASSIGN SYSTEM SPEED DIAL Enables the assignment of system speed dialling numbers. There are up to 450 entries available for programming.(or 950 entries if set in MMC 861 SYSTEM OPTIONS) Each speed dial number consis...

Page 245 - SYS SPEED NAME

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-201 5) If you want to save the speed dial number and name to the CID translation table.(MMC 728) SYS SPEED DIAL ADD CLI XLT ?NO Press the ANS/RLS button and dial 1 for YES. (The speed dial name must exist) 6) Press Trans...

Page 248 - ACCOUNT CODE

CHAPTER 2. Ошибка ! Стиль не определен . 2-204 Samsung Business Communications [708] ACCOUNT CODE Enables the account code entry feature. There are 999 available entries. DEFAULT DATA NONE ACTION DISPLAY 1) Press Transfer button and enter 708. Display shows: ACCOUNT CODE 001: 2) Dial code index numb...

Page 249 - PBX CODE; PBX ACCESS CODE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-205 [709] TOLL PASS CODE/SPECIAL CODE TABLE This MMC provides a means to program trunk code tables as described below. No Special Code Description 0 PBX CODE This table contains up to five entries and is used to identify...

Page 250 - TOLL OVERRIDE; TOLL RESTRICTION

CHAPTER 2. Ошибка ! Стиль не определен . 2-206 Samsung Business Communications 4) Enter via dial keypad the desired access/feature code.(e.g., 911) TOLL OVERRIDE 3:911 Press Right Soft button to enter and return to step 3 and enter more entries. 5) Press Transfer button to save and exit. OR Press Sp...

Page 255 - NOF DEL DGT

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-211 [713] LCR MODIFY DIGIT TABLE This program is sometimes referred to as Outgoing Dial Rules. It enables the system to add or delete a digit string or singular digit if needed to complete a call. With these digits in- s...

Page 260 - IN A MEETING

CHAPTER 2. Ошибка ! Стиль не определен . 2-216 Samsung Business Communications [715] PROGRAMMED STATION MESSAGE Allows custom messages to be programmed or default messages to be changed. ENTERING CHARACTERS Refer to ENTERING CHARACTERS in MMC 104, STATION NAME. There are 15 messages in the system: M...

Page 261 - NETWORK CODE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-217 [716] UK LCR OPTION This MMC provides UK LCR options. No Option Description 0 NETWORK CODE This table is used to network access code when the call is routed to the secondary network. This table contains up to 16 entr...

Page 264 - MY AREA CODE

CHAPTER 2. Ошибка ! Стиль не определен . 2-220 Samsung Business Communications [718] MY AREA CODE This MMC defines the home area code and country code. This information is used for caller ID and ISDN calls in defining the area code on incoming calls. This MMC removes the local area code to allow cal...

Page 265 - WELCOME TO ABC

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-221 [719] IDLE DISPLAY This program allows you to enter guidance data to be displayed on large LCD phones. ENTERING CHARACTERS Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME. DEFAULT DATA NONE ACTION DISPLAY 1) ...

Page 267 - RESTORE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-223 [721] SAVE STATION KEY PROGRAMMING Provides a service tool which minimizes the accidental loss of programmable buttons on phones. First the data is saved and then the station can be replaced with another station type...

Page 268 - button used to change the selection from BARGE to BOSS.; DIAL KEYPAD

CHAPTER 2. Ошибка ! Стиль не определен . 2-224 Samsung Business Communications [722] STATION KEY PROGRAMMING Allows the customizing of programmable buttons on specific phones and add-on modules (AOMs). For phones, buttons 1 and 2 are set as CALL buttons by default. For AOMs, all buttons are set as D...

Page 272 - pad by pressing numbers as shown in the table.; TYPE OF PHONE; COUNT; See; Programmable Button Assignments

CHAPTER 2. Ошибка ! Стиль не определен . 2-228 Samsung Business Communications [723] SYSTEM KEY PROGRAMMING This MMC is similar to MMC 722, Station Key Programming, except that changes are made system-wide rather than on a per-station basis. Features are entered via the dial key- pad by pressing num...

Page 273 - GPIK

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-229 DEFAULT DATA SEE DEFAULT DATA IN MMC 722 ACTION DISPLAY 1) Press Transfer button and enter 723. Display shows: TYPE:24 BTN SETS 01:CALL1 Æ 2) Enter type of set via dial keypad.(e.g.,1) OR TYPE:12 BTN SETS 01:CALL1 Æ ...

Page 274 - Not used

CHAPTER 2. Ошибка ! Стиль не определен . 2-230 Samsung Business Communications [724] DIAL NUMBERING PLAN This MMC allows the technician to change directory numbers for stations, trunks, station groups, trunk groups and feature access codes. The system can be pre-programmed with default 3- or 4-digit...

Page 275 - FEATURE NUMBERING DIAL KEYPAD

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-231 (continued) No Type of Dial No Description 10 VIRT EXT DIAL NO This is where virtual station directory numbers are changed or assigned. Default: SLT: 3501-3508, DGP: 3401-3416 11 MGI DIAL NO. This is where MGI port d...

Page 276 - Feature Code Assignments and Default; Feature

CHAPTER 2. Ошибка ! Стиль не определен . 2-232 Samsung Business Communications Feature Code Assignments and Default Feature Default Description ABAND 64 ABANDONED CALL ABS NONE ABSENCE ABW NONE AGENT BUSY/WRAP UP ACCT 47 ACCOUNT ALLCLR NONE ALL CLEAR AUTH NONE AUTHORIZATION CODE BARGE NONE BARGE-IN ...

Page 280 - The following options may be selected:

CHAPTER 2. Ошибка ! Стиль не определен . 2-236 Samsung Business Communications [725] SMDR OPTIONS Allows the system administrator to select the information printed on the SMDR report. The following options may be selected: No Option Default Description 00 PAGE HEADER YES This option determines wheth...

Page 281 - Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-237 (continued) No Option Default Description 15 INCOMING ANSWER NO If this option is set to YES, the duration of calls ringing before being answered will print on SMDR. 16 INTERCOM CALL NO This option determines whether...

Page 282 - PAGE HEADER

CHAPTER 2. Ошибка ! Стиль не определен . 2-238 Samsung Business Communications ACTION DISPLAY 1) Press Transfer button and enter 725. Display shows: PAGE HEADER PRINT: YES 2) Dial the option number.(e.g., 01) OR LINE PER PAGE 60 LINE/PAGE Use the Volume buttons to scroll through the options and pres...

Page 283 - NO VERSION DATA

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-239 [727] SYSTEM VERSION DISPLAY This MMC is used for system version display only.(READ ONLY) The displays depend on which modules are included in the system DEFAULT DATA NONE ACTION DISPLAY 1) Press Transfer button and ...

Page 284 - SAMSUNG TELECOM

CHAPTER 2. Ошибка ! Стиль не определен . 2-240 Samsung Business Communications [728] CID TRANSLATION TABLE Allows the system administrator or technician to associate a CID number received from the central office with a name programmed in this translation table. If there is no match be- tween a recei...

Page 285 - When changing the COS

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-241 [740] STATION PAIR Assigns a secondary station to a phone. This secondary station can be a keyset or single line phone. The secondary station assumes the Call Forwarding, Class of Service, LCR Class, and DND attribut...

Page 286 - DIGITS; MMC 749, RATE CALCULATION TABLE; EXAMPLES; are entered, the system will check 1813 first. If no match is

CHAPTER 2. Ошибка ! Стиль не определен . 2-242 Samsung Business Communications [746] COSTING DIAL PLAN The COSTING DIAL PLAN is used to analyze the leading dialled digits of a dialled num- ber and determine what DIAL PLAN it is to follow. Data entry for this program is in three fields: ENTRY, DIGITS...

Page 288 - DUR; Currency values; ALL COST RATES: NO DATA; ) Press Transfer button and enter 747.

CHAPTER 2. Ошибка ! Стиль не определен . 2-244 Samsung Business Communications [747] RATE CALCULATION TABLE The RATE CALCULATION TABLE is used to define the billing charges for each COST RATE. These rate tables correlate with the Trunk Cost Rate and the Costing Dial Plan. There are eight call costin...

Page 290 - ALL OPTIONS ARE NO

CHAPTER 2. Ошибка ! Стиль не определен . 2-246 Samsung Business Communications [750] VM CARD RESTART This MMC is used for the Samsung Built-In Voice Mail card. There are four options available in this MMC: No Option Description 0 MBX DOWNLOAD When the Built-In Voice Mail module starts, part of the p...

Page 291 - MBX DOWNLOAD

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-247 ACTION DISPLAY 1) Press Transfer button and enter 750. Display shows: MBX DOWNLOAD NO 2) Press Volume button to make selection and press Right Soft button. VM RESTART RESET NOW ? NO 3) Press Volume button to make sel...

Page 292 - ASSIGN MAIL BOX

CHAPTER 2. Ошибка ! Стиль не определен . 2-248 Samsung Business Communications [751] ASSIGN MAILBOX This MMC is only used for the Samsung Built-In Voice Mail card. It assigns mailboxes to each station or group as required. During Voice Mail card power up, mailboxes will be cre- ated for each directo...

Page 293 - AUTO RECORD

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-249 [752] AUTO RECORD This MMC is only used for the Samsung Built-In Voice Mail card. Specific stations in the phone system can be assigned to automatically record conversations. When this option is set, all incoming, al...

Page 296 - VM HALT

CHAPTER 2. Ошибка ! Стиль не определен . 2-252 Samsung Business Communications [754] VM HALT This MMC is only used for the Samsung Built-In Voice Mail. It is used to halt the Voice Mail Module. If the Voice Mail module is halted by using this MMC, system has to restart to use the Voice Mail module a...

Page 297 - ) Press Transfer button and enter 755.; VM ALARM; ) Press Transfer button to save and exit.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-253 [755] VM ALARM This MMC is only used for the Samsung Built-In Voice Mail. It will generate an alarm message in the mailbox defined in MMC 751 whenever the Voice Mail disk drive reaches a threshold. The threshold is m...

Page 298 - When the first Built-In Voice Mail port is used for VMMOH; OR; SET VMMOH

CHAPTER 2. Ошибка ! Стиль не определен . 2-254 Samsung Business Communications [756] ASSIGN VMMOH This MMC is only used for the Samsung Built-In Voice Mail. It is used to assign each port a Music-On-Hold source for the system from a sound file located on the Voice Mail card hard disk drive. The 100 ...

Page 303 - items 89 to 99 reserved for other PMS stream items.; PRE DEFINED CODES; NO ENTRIES

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-259 [760] ITEM COST TABLE This MMC provides a means to assign a code to a billable item along with a 10-character name for the item. There are a maximum of 100 entries(00 to 99) in the table with item 00 reserved as the ...

Page 305 - TAX RATE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-261 [761] TAX RATE SETUP This MMC allows the technician to set up the eight tax rates used in MMC 760. Each tax rate may be defined as a fixed value or as a percentage of the item cost. In addition, a 10- character name ...

Page 309 - LCR

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-265 5) Enter OUT DIGIT maximum 16 digits, and press Right Soft button to move cursor. (001)OUT DIGIT 7500 6) Enter USE LCR NUM option number([2]). OR (001)USE LCR NUM Press Volume button to select USE LCR NUM and press R...

Page 310 - PASSCODE ERROR

CHAPTER 2. Ошибка ! Стиль не определен . 2-266 Samsung Business Communications [800] ENABLE TECHNICIAN PROGRAM Used to open and close technician-level programming. If programming is not opened and an attempt is made to access a system MMC, an error message will be displayed. CONDITIONS A 4-digit pas...

Page 313 - eight levels within 11.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-269 [805] TX LEVEL AND GAIN Allows the system administrator to set the base level of TX volume on phones. There are eight levels that can be controlled by the Volume buttons on phones, and 10 controllable levels in the s...

Page 315 - When a card is removed and a different type card is inserted

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-271 [806] CARD PRE-INSTALL Allows the pre-programming of a card slot for a specific card type. A card inserted into a system will not be recognized by the system until it is enabled using this MMC. Cards in- stalled usin...

Page 317 - ) Press Transfer button to save and exit.; DIAL NUMBERING PLAN; Phone Volume Level

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-273 6) Press Transfer button to save and exit. OR Press Speaker button to advance to next MMC. RELATED ITEMS MMC 724 DIAL NUMBERING PLAN [807] PHONE VOLUME CONTROL Allows the system administrator to set phone volume leve...

Page 318 - FX

CHAPTER 2. Ошибка ! Стиль не определен . 2-274 Samsung Business Communications DEFAULT DATA DEPENDS ON PHONE TYPE(SHOWN FOR 21D) 21D FX Type Default Type Default KEY TONE VOL 1 LINE VOLUME 3 SIDETONE VOL 1 SPEAKER VOLUME 14 HANDSET TX 4 NOR.LP ATTEN 4 MIC TX LEVEL 3 MIC LP ATTEN 5 NOISE GUARD 8 ACOU...

Page 319 - PROC

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-275 [810] HALT PROCESSING Used only in the event that all data processing needs to be stopped either in a single cabinet slot or in the entire system. DEFAULT DATA PROC ACTION DISPLAY 1) Press Transfer button and enter 8...

Page 320 - RESET SYSTEM

CHAPTER 2. Ошибка ! Стиль не определен . 2-276 Samsung Business Communications [811] RESET SYSTEM Provides a means of restarting the system. The system can simply be reset or it can be reset and all memory cleared to default values. Extreme care should be taken when using this MMC. If the system is ...

Page 321 - should not be used from the default levels; SELECT COUNTRY

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-277 [812] SET COUNTRY CODE Selects the country for correct system programming and operation. When changing the MMC [812] ‘ MMC [812] SET COUNTRY CODE ’ should not be used from the default levels without the assistance of...

Page 322 - Hotel Related MMCs

CHAPTER 2. Ошибка ! Стиль не определен . 2-278 Samsung Business Communications [813] HOTEL OPERATION Allows the installing technician to enable the HOTEL feature. DEFAULT DATA DISABLE ACTION DISPLAY 1) Press Transfer button and enter 813. Display shows: HOTEL OPERATION DISABLE 2) Dial 1 for ENABLE o...

Page 323 - of 00:00 means that no daily save is performed.; ) Press Transfer button and enter 815.; MMC IS BUSY

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-279 [815] CUSTOMER DATABASE COPY This enables the on-board customer database(SRAM) to be copied to the MC Data- base(MCDB) and also allows the MCDB database to be copied to the SRAM. A daily save can be programmed to aut...

Page 325 - PGM DOWNLOAD

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-281 [818] PROGRAM DOWNLOAD Change the system version by downloading the new version stored on the MC card to the APP/SYS/DRV/WEB/RUT/MSP/CSP and TEPRI cards. Option Description APP To upgrade application (including MP an...

Page 326 - Files included in MC card are described below:; File Name; MP and VM module is included in this package.

CHAPTER 2. Ошибка ! Стиль не определен . 2-282 Samsung Business Communications [819] MC FILE CONTROL Displays the size(in bytes) of various system program files on the MC card. Files included in MC card are described below: File Name Description Startup.ini If user designates an MCP program in MMC 8...

Page 328 - LINK ID

CHAPTER 2. Ошибка ! Стиль не определен . 2-284 Samsung Business Communications [820] ASSIGN SYSTEM LINK ID This MMC is used to assign the system link ID for PRI and VoIP networking. Up to 100 link IDs can be entered including SELF ID. In addition, each Link ID is associated with the IP address and I...

Page 329 - NORMAL

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-285 [821] ASSIGN NETWORK TRUNK Assigns the Q-signalling PRI trunk for networking. It is assigned data on a per-TEPRI card basis. DEFAULT DATA NORMAL ACTION DISPLAY 1) Press Transfer button and enter 821. Display shows: [...

Page 331 - Enter virtual extension number.; SLT; Enter virtual extension type.; SLT

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-287 ACTION DISPLAY 1) Press Transfer button and enter 822. Display shows: [3501]PORT TYPE SLT 2) Enter virtual extension number. OR [3501] PORT TYPE SLT Press Volume button to make selection and press Right Soft button t...

Page 332 - Assigns the class of service for networking.

CHAPTER 2. Ошибка ! Стиль не определен . 2-288 Samsung Business Communications [823] ASSIGN NETWORK COS Assigns the class of service for networking. No Option Default Description 01 CALL OFFER Y Call Offer 04 CC SIG CONN Y CC Retention of Signal Connection 05 CC SVC RETN Y CC Service Retention 06 CC...

Page 338 - REFERENCE CLOCK

CHAPTER 2. Ошибка ! Стиль не определен . 2-294 Samsung Business Communications [826] ASSIGN SYSTEM REFERENCE CLOCK The system clock may be synchronized with an external clock source from the TEPRI or BRI card, or it can use the internal clock source. This MMC can assign the system clock source prior...

Page 339 - The data listed below can be printed.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-295 [829] LAN PRINTER PARAMETERS This program sets the various parameters required for printing to a LAN-connected device. The data listed below can be printed. 01. SMDR 02. UCD REPORT 03. TRAFFIC REPORT 04. ALARM REPORT...

Page 340 - SMDR

CHAPTER 2. Ошибка ! Стиль не определен . 2-296 Samsung Business Communications DEFAULT DATA SEE DESCRIPTION ACTION DISPLAY 1) Press Transfer button and enter 829. Display shows: [01] DATA TYPE SMDR 2) Enter type of data to be printed. OR [02] DATA TYPE UCD REPORT Press Volume button to select the ty...

Page 342 - ETHERNET; CLEAR MEMORY; SYSTEM IP TYPE: PRIVATE IP ONLY

CHAPTER 2. Ошибка ! Стиль не определен . 2-298 Samsung Business Communications ETHERNET PARAMETERS - The first three parameters: SYSTEM IP ADDR, SYSTEM GATEWAY, and SYS- TEM NET MASK are stored separately from the main system database and thus will not be defaulted when MMC811 ‘ CLEAR MEMORY ’ is pe...

Page 348 - When changing IP

CHAPTER 2. Ошибка ! Стиль не определен . 2-304 Samsung Business Communications [833] VoIP IP TABLE This MMC provides the IP addresses in tables pointed to by the VoIP code entry(MMC 832). There are 63 tables with up to 16 entries each. The destination IP address is required to route dialled digits b...

Page 350 - GATEWAY CALL ID

CHAPTER 2. Ошибка ! Стиль не определен . 2-306 Samsung Business Communications DEFAULT DATA SEE DESCRIPTION ACTION DISPLAY 1) Press Transfer button and enter 834. Display shows the first option. GATEWAY CALL ID 1234 2) Enter H.323 option number(00-20) via dial keypad. H.323 FAST SETUP DISABLE OR Pre...

Page 351 - This MMC provides various MGI DSP options.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-307 [835] MGI DSP OPTIONS This MMC provides various MGI DSP options. No Parameter Description Default 00 CODEC-FRAME Selects which audio CODEC compression will be used and the transmission interval time of VoIP packets g...

Page 355 - OFF; 6 GK REGISTERED; NO

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-311 No Parameter Description Default 13 GRQ SEND Select ON or OFF for use of Gatekeeper RAS Re-quest(GRQ) messages. OFF 14 USE MULTI E.164 When this option is set to ENABLE, the E.164 identi- fier can be assigned. DISABL...

Page 362 - with a User ID and Password in order to register with the system.

CHAPTER 2. Ошибка ! Стиль не определен . 2-318 Samsung Business Communications [840] IP PHONE INFORMATION This MMC provides a means to register IP phones with the OfficeServ 7100 system. Dur- ing registration, the IP and MAC addresses are also registered. The User ID and Password must match the tabl...

Page 365 - The options set in this MMC apply system wide.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-321 [841] SYSTEM IP OPTIONS This MMC provides various proprietary Samsung VoIP and IP integration options. The options set in this MMC apply system wide. No Option Description Default 00 PHONE VERSION Sets running IP-bas...

Page 368 - PHONE VERSION

CHAPTER 2. Ошибка ! Стиль не определен . 2-324 Samsung Business Communications ACTION DISPLAY 1) Press Transfer button and enter 841. Display shows the first available option. PHONE VERSION LARGE DGP: 0000 2) Enter option category number 0-13 via dial Keypad.(e.g., 2) ITP REGISTRATION TYPE: SYS PSWD...

Page 369 - This MMC modifies the WLAN parameters.; WLAN PARAMETER; 5 CODEC LIST

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-325 [845] WLAN PARAMETERS This MMC modifies the WLAN parameters. The SYSTEM KEY is used internally to distinguish between systems when registering a terminal. The default value is ‘00000’, but this must be changed to ano...

Page 370 - SIP PARAMETER

CHAPTER 2. Ошибка ! Стиль не определен . 2-326 Samsung Business Communications (continued) No Parameter Description Default 07 VERSION WLAN module version. Version 20 MAX AP CH. Set the maximum channel number of AP 00 21 WLAN SWTCH Support WLAN switch function DISABLE SIP PARAMETER No Parameter Desc...

Page 371 - DEFAULT

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-327 ACTION DISPLAY 1) Press Transfer button and enter 845. WLAN: SYSTEM ID WBS24 2) When the cursor is on WLAN, press Volume button and select WLAN, WBS, or SIP. WLAN: SYSTEM ID WBS24 3) Press Right Soft button to move t...

Page 372 - FFFF FFFF FFFF

CHAPTER 2. Ошибка ! Стиль не определен . 2-328 Samsung Business Communications 5) Set the items below at the WBS24 menu. The se- lected WBS is as set in MMC 849(SELECT AP TYPE option) i.e. CWBS=COMBO WBS, BWBS=BASIC WBS. Register the WBS24 IP ADDRESS. CWBS1: IP ADDR 0. 0. 0. 0 Register the WBS24 NET...

Page 373 - until; MMC 846 WIP INFORMATION

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-329 Register the RE-TRANS T4. The time the User Agent Server waits after receiving the ACK message. SIP : RE-TRANS T4 005000MS Based on the RFC2543 specification. The range is 0-9900 ms.(Default: 5000 ms) Register the GE...

Page 375 - DETACH

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-331 Displays the location of the registered terminal. [3301] LOCATED DETACH Displays the PHONE TYPE of the registered termi- nal. [3301] PHONE TYPE Displays the WLI NUMBER of the registered ter- minal.(currently not used...

Page 377 - Parameter

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-333 [849] WLAN CONFIGURATION This MMC is used to set the WLAN configuration. Parameter Description REGISTER VoWLAN Enable or disable registration of new WIP-5000M mobile phone. WIP REGIST CLEAR Used to clear the registra...

Page 378 - ) Enter WEP KEY values when the WBS WEP SER-; WIP INFORMATION

CHAPTER 2. Ошибка ! Стиль не определен . 2-334 Samsung Business Communications 6) Enter WEP KEY values when the WBS WEP SER- VICE is enabled.(13 characters only) WEP KEY 7) Select ENABLE to use the static WBS IP. STATIC WBS IP DISABLE 8) Select ENABLE to use the static WIP IP. STATIC WIP IP DISABLE ...

Page 379 - DTMFR DSP’S

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-335 [850] SYSTEM RESOURCE DISPLAY This MMC is used for system resource display.(used and free resources) This is a READ- ONLY MMC. 0. DTMFR DSP’S 1. CID DSP’S 2. R2MFC DSP’S 3. CONF GROUP’S DEFAULT DATA NONE ACTION DISPL...

Page 380 - grade the system’s operating capabilities.; ALARM REPORTING OPTIONS(Select one of the options)

CHAPTER 2. Ошибка ! Стиль не определен . 2-336 Samsung Business Communications [851] ALARM REPORTING This MMC is used to view, store, print or clear system alarms. Two levels of faults are dis- played via an alarm code: major alarms and minor alarms. Major alarms codes are usually service affecting ...

Page 382 - Alarm Code Definitions:

CHAPTER 2. Ошибка ! Стиль не определен . 2-338 Samsung Business Communications [852] SYSTEM ALARM ASSIGNMENTS This MMC allows the assignment of system alarms to ring and display on stations that have an Alarm key assigned. The Alarm key is assigned in MMC 722(Station Key Pro- gramming). Alarm key pr...

Page 388 - POR Restart

CHAPTER 2. Ошибка ! Стиль не определен . 2-344 Samsung Business Communications DEFAULT DATA ALL OFF ACTION DISPLAY 1) Press Transfer button and enter 852. Display shows: 01:MJA01 ACT:OFF POR Restart 2) Enter desired Alarm Display number.(e.g., 64) OR 64:MNF01 ACT:OFF Card Out Press Volume buttons to...

Page 389 - MAINTENANCE BUSY OPTIONS; ALL IDLE

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-345 [853] MAINTENANCE BUSY This MMC is used to place stations, trunks and common resources equipment in a mainte- nance busy condition. This can be used to isolate suspected intermittent problems. Stations placed in main...

Page 391 - DIAGNOSTIC TIME

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-347 [854] DIAGNOSTIC TIME Provides a means to set the Diagnostic Time. The system diagnostics tests include memory audits, internal loopback tests on digital trunks, and DSP, AA DSP tests. Additional tests include CODEC ...

Page 392 - NNNN

CHAPTER 2. Ошибка ! Стиль не определен . 2-348 Samsung Business Communications [856] TECH PROGRAMMING LOGS This MMC lists the date, time and entry location of the last eight times that technician- level programming was accessed. This allows a technician to determine if there was unau- thorized acces...

Page 393 - cabinet card is as follows:; ) Press Transfer button and enter 857.

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-349 [857] VIRTUAL CABINET SET This MMC is the program that specifies the type of virtual cabinet card. The type of virtual cabinet card is as follows: Type Range Type Range SLT C2S01 ~ C2S03 BRI STN C4S02 ~ C5S01 DGP C2S...

Page 394 - DGP

CHAPTER 2. Ошибка ! Стиль не определен . 2-350 Samsung Business Communications 3) Press Volume botton to scroll card type and Select card type by pressing Right soft botton. C4-S01:SLT DGP 4) Press Transfer button to save and exit. OR Press Speaker button to advance to next MMC. RELATED ITEMS MMC 72...

Page 395 - MP CARD

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-351 [859] HARDWARE VERSION DISPLAY This MMC is used for system hardware EPLD/PCB version display. This is a READ- ONLY MMC. No Option Description 1 MP CARD Shows the EPLD/PCB version of MCP. 2 C1S1 Shows the EPLD/PCB ver...

Page 397 - ) Press Transfer button and enter 861.; AUTO UPDATE TIME; Press Volume button to select and press

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications 2-353 ACTION DISPLAY 1) Press Transfer button and enter 861. Display shows: AUTO UPDATE TIME DISABLE 2) Enter the option number. OR AUTO UPDATE TIME DISABLE Press Volume button to select and press Right Soft button to move...

Page 401 - ABBREVIATION

OfficeServ 7100 Call Server Programming Guide Samsung Business Communications I ABBREVIATION A AAA Authentication, Authorization and Accounting AC Alternating Current ACD Automatic Call Distribution ALG Application Level Gateway AME Answering Machine Emulation AMI Alternate Mark Inversion AOM Add On...

Page 407 - OfficeServ 7100 Call Server; Programming Guide

OfficeServ 7100 Call Server Programming Guide ©2007 Samsung Electronics Co., Ltd. All rights reserved. Information in this giude is proprietary to SAMSUNG Electronics Co., Ltd. No information contained here may be copied, translated, tran-scribed or duplicated by any form without the prior written c...