Samsung 164BX - Manuals - manualsarea.com

Page 2 - Notice

Notice T he information in this publication has been carefully checked and is believed to be entirely accurate at the time of publication. Samsung assumes no responsibility, however, for possible errors or omissions, or for any consequences resulting from the use of the information contained herein....

Page 3 - Contents

iii Contents 1 About This Manual 1.1 Difference between AlphaPC 164UX and 164BX . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 1.2 Manual Conventions and Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 2 Features of the AlphaPC 164UX Motherboard 2.1 Power Req...

Page 4 - Memory and Microprocessor Configuration

iv 4.9 Input Power Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8 4.10 Narrow SCSI Bus Connector (UX only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8 4.11 Fast and Wide SCSI Bus Connector (UX only) . . . . . . . . . . . . . ...

Page 6 - Figures

vi Figures 2–1 AlphaPC 164UX Jumper/Connector Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 2–2 Board measurement and Hole Position Diagram . . . . . . . . . . . . . . . . . . . . . . . . . 2–6 2–3 Board Vertical Clearance Diagram . . . . . . . . . . . . . . . . . . . . . . . ...

Page 7 - Tables

vii Tables 2–1 AlphaPC 164UX Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 2–2 AlphaPC 164UX Jumper/Connector List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3 2–3 Power Supply DC Current Requirements . . . . . . . . . . . ....

Page 8 - About This Manual; 1164 microprocessor and the companion; The following sections are about AlphaPC 164UX motherboard only.; Manual Conventions and Terminology; The following conventions are used in this manual.; Note: Notes provide additional information about a topic.; and 19A are hexadecimal numbers.

About This Manual 1–1 1 About This Manual This manual describes the AlphaPC 164UX/BX motherboard, a module for computing systems based on the Alpha TM 21164 microprocessor and the companion Digital Semiconductor 21174 core logic chip. It describes the motherboard’s features and how to set its config...

Page 9 - Manual Conventions and Terminology; Terms: The following terms are used in this manual:

1–2 About This Manual Manual Conventions and Terminology Extents: Extents are specified by a single number or a pair of numbers in square brackets ([ ]) separated by a colon (:), and are inclusive. For example, bits [7:3] specify an extent including bits 7, 6, 5, 4, and 3. Multiple bit fields are sh...

Page 10 - Features of the AlphaPC164UX Motherboard; Figure 2–1 shows the AlphaPC 164UX motherboard and its components.

Features of the AlphaPC164UX Motherboard 2–1 2 Features of the AlphaPC164UX Motherboard Table 2–1 provides an overview of the AlphaPC 164UX motherboard’s features. Figure 2–1 shows the AlphaPC 164UX motherboard and its components. Table 2–1 AlphaPC 164UX Features Feature Description Microprocessor A...

Page 11 - Figure 2–1 AlphaPC 164UX Jumper/Connector Location

2–2 Features of the AlphaPC164UX Motherboard Figure 2–1 AlphaPC 164UX Jumper/Connector Location U5 U6 U7 U8 J24 J33 J22 J21 J7 J6 J5 J2 J13 J25 J12 J34 Pwr LED IDE LED SCSI LED PwrSwitch ResetSwitch GND FOK +12 Blkwire Yellowwire Redwire J10 U3 U4 J18 J16 J15 J28 U55 J31 J23 J30 J29 J17 J36 J37 J35

Page 12 - Table 2–2 AlphaPC 164UX Jumper/Connector List

Features of the AlphaPC164UX Motherboard 2–3 Table 2–2 AlphaPC 164UX Jumper/Connector List Item No. Description Item No. Description J2 Full length 64 bit PCI slot U3 DIMM socket 0 J5 Half length 32 bit PCI slot U4 DIMM socket 1 J6 Full length 32 bit PCI slot U5 DIMM socket 2 J7 Full length 32 bit P...

Page 13 - Power Requirements; Table 2–3 Power Supply DC Current Requirements; Table 2–4 AlphaPC 164UX Motherboard Environmental Requirements

2–4 Features of the AlphaPC164UX Motherboard Power Requirements 2.1 Power Requirements The AlphaPC 164UX motherboard requires a minimum of a 300 watt power supply. The power supply must be ATX-compliant. Caution: Fan sensor required. The 21164 microprocessor cooling fan must have a built-in sensor t...

Page 14 - Physical Parameters; Board Measurements and Hole Locations

Features of the AlphaPC164UX Motherboard 2–5 Physical Parameters 2.3 Physical Parameters This section has two parts: the first illustrates the distances between the board mounting holes and the edges of the board; the second shows the vertical clearances required by the board components at all point...

Page 15 - Figure 2–2 Board measurement and Hole Position Diagram

2–6 Features of the AlphaPC164UX Motherboard Physical Parameters Figure 2–2 Board measurement and Hole Position Diagram 2.3.2 Vertical Clearance Figure 2–3 shows the Board Vertical Clearance for the AlphaPC 164UX Board Meas urements and Hole Loc ations 9.600" .250" .650" 3.1" .400...

Page 16 - Figure 2–3 Board Vertical Clearance Diagram

Features of the AlphaPC164UX Motherboard 2–7 Physical Parameters Figure 2–3 Board Vertical Clearance Diagram 0.5" 1.0" 1.0" 0.5" 1.5" 2.5" Ver tic al Clear anc e Requirements 1.5"

Page 17 - Figure 2–4 ATX Back Panel Dimension

2–8 Features of the AlphaPC164UX Motherboard Physical Parameters 2.3.3 ATX Cutout Information Figure 2–4 ATX Back Panel Dimension In the event that an OEM or system integrator would like to use a chassis that supports a nstandard ATX back-panel cutout, we have included the mechanical drawing used to...

Page 18 - AlphaPC 164UX Jumper Configuration

AlphaPC 164UX Jumper Configuration 3–1 3 AlphaPC 164UX Jumper Configuration The AlphaPC 164UX has one set of jumpers located at J28. These jumpers set the hardware configuration and boot options. Figure 2–1 shows the jumper location on the AlphaPC 164UX motherboard. Figure 3–1 shows the jumper funct...

Page 19 - Figure 3–1 AlphaPC 164UX Configuration Jumpers

3–2 AlphaPC 164UX Jumper Configuration CPU Speed Selection (Option 1,2,3, &4) Figure 3–1 AlphaPC 164UX Configuration Jumpers 3.1 CPU Speed Selection (Option 1,2,3, &4) The clock synthesizer makes it possible to change the frequency of the microproces-sor’s clock input without having to chang...

Page 20 - The standard motherboard is manufactured with 128K

AlphaPC 164UX Jumper Configuration 3–3 Bcache Size Jumpers (Option 14,15) 3.2 Bcache Size Jumpers (Option 14,15) The Bcache size jumpers are located at J28–27/28 (Option14) and J28–29/30 (Option15), as shown in Figure 3–1. The AlphaPC 164UX-2/-4 is configured with 2MB/4MB of Bcache during production...

Page 21 - AlphaPC 164UX Connector Pinouts; PCI Bus Connector Pinouts; Table 4–1 shows the PCI bus connector pinouts.; Table 4–1 PCI Bus Connector Pinouts

AlphaPC 164UX Connector Pinouts 4–1 4 AlphaPC 164UX Connector Pinouts This section lists the pinouts of all AlphaPC 164UX connectors. See Figure 2–1 for connector locations. 4.1 PCI Bus Connector Pinouts Table 4–1 shows the PCI bus connector pinouts. Table 4–1 PCI Bus Connector Pinouts (Sheet 1 of 2...

Page 22 - PCI Bus Connector Pinouts

4–2 AlphaPC 164UX Connector Pinouts PCI Bus Connector Pinouts B11 PRSNT2# B12 Gnd B13 Gnd B14 — B15 Gnd B16 CLK B17 Gnd B18 REQ# B19 Vdd B20 AD<31> B21 AD<29> B22 Gnd B23 AD<27> B24 AD<25> B25 +3V B26 C/BE#<3> B27 AD<23> B28 Gnd B29 AD<21> B30 AD<19> B...

Page 23 - ISA Expansion Bus Connector Pinouts; Table 4–2 shows the ISA expansion bus connector pinouts.; Table 4–2 ISA Expansion Bus Connector Pinouts (J10)

AlphaPC 164UX Connector Pinouts 4–3 ISA Expansion Bus Connector Pinouts 4.2 ISA Expansion Bus Connector Pinouts Table 4–2 shows the ISA expansion bus connector pinouts. Table 4–2 ISA Expansion Bus Connector Pinouts (J10) Pin Signal Pin Signal Pin Signal Pin Signal 1 Gnd 2 IOCHCK# 3 RSTDRV 4 SD7 5 Vd...

Page 24 - SDRAM DIMM Connector Pinouts; Table 4–3 shows the SDRAM DIMM connector pinouts.; Table 4–3 SDRAM DIMM Connector Pinouts (U3 through U8)

4–4 AlphaPC 164UX Connector Pinouts SDRAM DIMM Connector Pinouts 4.3 SDRAM DIMM Connector Pinouts Table 4–3 shows the SDRAM DIMM connector pinouts. Table 4–3 SDRAM DIMM Connector Pinouts (U3 through U8) 1 (Sheet 1 of 2) Pin Signal Pin Signal Pin Signal Pin Signal 1 Gnd 2 DQ0 3 DQ1 4 DQ2 5 DQ3 6 3.3V...

Page 25 - EIDE Drive Bus Connector Pinouts; Table 4–4 shows the EIDE drive bus connector pinouts.; Table 4–4 EIDE Drive Bus Connector Pinouts (J24)

AlphaPC 164UX Connector Pinouts 4–5 EIDE Drive Bus Connector Pinouts 4.4 EIDE Drive Bus Connector Pinouts Table 4–4 shows the EIDE drive bus connector pinouts. 1 Pins 1 through 84 are on the front side and pins 85 through 168 are on the back side. 2 The AlphaPC 164UX uses BA1 as both BA1 and ADDR12....

Page 26 - Diskette Drive Bus Connector Pinouts; Table 4–5 shows the diskette (floppy) drive bus connector pinouts.; Parallel Bus Connector Pinouts; Table 4–6 shows the parallel bus connector pinouts.; Table 4–6 Parallel Bus Connector Pinouts (J13)

4–6 AlphaPC 164UX Connector Pinouts Diskette Drive Bus Connector Pinouts 4.5 Diskette Drive Bus Connector Pinouts Table 4–5 shows the diskette (floppy) drive bus connector pinouts. 4.6 Parallel Bus Connector Pinouts Table 4–6 shows the parallel bus connector pinouts. Table 4–5 Diskette (Floppy) Driv...

Page 27 - COM1/COM2 Serial Line Connector Pinouts; Table 4–7 shows the COM1/COM2 serial line connector pinouts.

AlphaPC 164UX Connector Pinouts 4–7 COM1/COM2 Serial Line Connector Pinouts 4.7 COM1/COM2 Serial Line Connector Pinouts Table 4–7 shows the COM1/COM2 serial line connector pinouts. 4.8 Keyboard/Mouse Connector Pinouts Table 4–8 shows the keyboard/mouse connector pinouts. Table 4–7 COM1/COM2 Serial L...

Page 28 - Input Power Connector Pinouts; Table 4–9 shows the input power connector pinouts.; Table 4–9 Input Power Connector Pinouts (J18)

4–8 AlphaPC 164UX Connector Pinouts Input Power Connector Pinouts 4.9 Input Power Connector Pinouts Table 4–9 shows the input power connector pinouts. 4.10 Narrow SCSI Bus Connector (UX only) Table 4–10 shows the narrow SCSI bus connector pinouts 1 This pinout is ATX-compliant. Table 4–9 Input Power...

Page 29 - Fast and Wide SCSI Bus Connector (UX only); Table 4–11 shows the Fast and Wide SCSI bus connector pinouts; Table 4–11 Fast and Wide SCSI Bus Connector Pinouts (J15)

AlphaPC 164UX Connector Pinouts 4–9 Fast and Wide SCSI Bus Connector (UX only) 4.11 Fast and Wide SCSI Bus Connector (UX only) Table 4–11 shows the Fast and Wide SCSI bus connector pinouts 4.12 10/100 Mbit Ethernet Connector Pinouts (UX only) Table 4–12 shows the 10/100 Mbit Ethernet connector pinou...

Page 30 - Speaker Connector Pinouts; Table 4–13 shows the speaker connector pinouts.; Microprocessor Fan Power Connector Pinouts; Table 4–14 shows the microprocessor fan power connector pinouts.; Table 4–13 Speaker Connector Pinouts (J23); Pin Power LED Connector Pinouts; Table 4–15 shows the power LED connector pinouts.; Table 4–15 Power LED Connector Pinouts (J31)

4–10 AlphaPC 164UX Connector Pinouts Speaker Connector Pinouts 4.13 Speaker Connector Pinouts Table 4–13 shows the speaker connector pinouts. 4.14 Microprocessor Fan Power Connector Pinouts Table 4–14 shows the microprocessor fan power connector pinouts. Table 4–13 Speaker Connector Pinouts (J23) Pi...

Page 31 - IDE Drive LED Connector Pinouts; Table 4–16 shows the IDE drive LED connector pinouts.; Reset Switch Connector Pinouts; Table 4–17 shows the reset switch connector pinouts.; Soft Power Switch Connector Pinouts; Table 4–18 shows the soft power switch connector pinouts.; SCSI LED Connector Pinouts; Table 4–19 shows the SCSI LED connector pinouts.; Table 4–16 IDE Drive LED Connector Pinouts (J29)

AlphaPC 164UX Connector Pinouts 4–11 IDE Drive LED Connector Pinouts 4.16 IDE Drive LED Connector Pinouts Table 4–16 shows the IDE drive LED connector pinouts. 4.17 Reset Switch Connector Pinouts Table 4–17 shows the reset switch connector pinouts. 4.18 Soft Power Switch Connector Pinouts Table 4–18...

Page 32 - When configuring or upgrading SDRAM, observe the following rules:; Configuring SDRAM Memory; Refer to Figure 2–1 for DIMM connector locations.; Table 5–1 AlphaPC 164UX SDRAM Memory Configurations

Memory and Microprocessor Configuration 5–1 5 Memory and Microprocessor Configuration For higher system speed or greater throughput, you can upgrade SDRAM memory by replacing DIMMs with those of greater size. When configuring or upgrading SDRAM, observe the following rules: • Each DIMM must be a 168...

Page 33 - Configuring SDRAM Memory

5–2 Memory and Microprocessor Configuration Configuring SDRAM Memory 128MB 32MB 32MB 16MB 16MB 16MB 16MB 32MB 32MB 32MB 32MB 64MB 64MB 160MB 32MB 32MB 32MB 32MB 16MB 16MB 64MB 64MB 16MB 16MB 192MB 32MB 32MB 32MB 32MB 32MB 32MB 64MB 64MB 16MB 16MB 192MB 64MB 64MB 32MB 32MB 224MB 64MB 64MB 32MB 32MB 1...

Page 34 - The following are important items to remember; Upgrading SDRAM Memory; Use the following general guidelines:

Memory and Microprocessor Configuration 5–3 Upgrading SDRAM Memory Note: The following are important items to remember - in order for the ECC memory feature to work, all DIMMs must be 72bit. - To populate a bank,you must use 2 matched DIMMs. 5.2 Upgrading SDRAM Memory You can upgrade memory in the A...

Page 35 - Restore power to the system.; Increasing Microprocessor Speed

5–4 Memory and Microprocessor Configuration Increasing Microprocessor Speed 4. Firmly push the module into the connector. Ensure that the DIMM snaps into the plastic locking levers on both ends. 5. Restore power to the system. 5.3 Increasing Microprocessor Speed This section describes how to complet...

Page 37 - Wearing clean gloves, pick up the GRAFOIL pad. Do not perform this

5–6 Memory and Microprocessor Configuration Increasing Microprocessor Speed 6. Install the heat sink and heat-sink fan as directed in the following steps. A heat-sink/fan kit is available from the vendor listed at the beginning of this procedure. Refer to Figure 5–2 for heat-sink and fan assembly de...

Page 38 - taking care not to damage the stud threads.

Memory and Microprocessor Configuration 5–7 Increasing Microprocessor Speed 3. Place the GRAFOIL pad on the gold-plated slug surface and align it with the threaded studs. b. Attach the microprocessor heat sink. The heat-sink material is clear anod-ized, hot-water-sealed, 6061-T6 aluminum. The nut ma...

Page 39 - Interrupts and ISA Bus Addresses; Table 6–1 lists each Alpha 164UX ISA interrupt and its source.; Table 6–1 ISA Interrupts

Interrupts and ISA Bus Addresses 6–1 6 Interrupts and ISA Bus Addresses This section lists the system and I/O interrupt assignments. It also lists the physical Alpha 164UX I/O space assignments. 6.1 Interrupts Table 6–1 lists each Alpha 164UX ISA interrupt and its source. Table 6–1 ISA Interrupts (S...

Page 40 - Table 6–2 lists the Alpha 164UX ISA I/O space address mapping.; Table 6–2 ISA I/O Address Map

6–2 Interrupts and ISA Bus Addresses ISA I/O Address Map 6.2 ISA I/O Address Map Table 6–2 lists the Alpha 164UX ISA I/O space address mapping. Table 6–2 ISA I/O Address Map 6.2.1 Flash ROM Address Map The flash ROM is mapped to three regions of memory. Access to the first two regions is RO. The fir...

Page 42 - Configuring for Windows NT; Table 7–1 Navigation Keys

Configuring for Windows NT 7–1 7 Configuring for Windows NT This chapter describes the ARCSBIOS and gives instruction to begin the installation of Windows NT. 7.1 ARCSBIOS The AlphaPC 164UX motherboard ships with the ARCSBIOS firmware. This firm-ware initializes the system and enables you to boot th...

Page 43 - ARCSBIOS; Figure 7–1 Main Bios Screen

7–2 Configuring for Windows NT ARCSBIOS Figure 7–1 Main Bios Screen The upper left hand corner of the screen displays the revision of the ARCSBIOS and the system serial number. The upper right hand corner of the screen displays the speed that the AlphaPC 164UX is running. The first number is the clo...

Page 45 - These selections are described below.

7–4 Configuring for Windows NT ARCSBIOS Setup. Caution : Changing the environment variables may cause Windows NT to fail to boot. There are 4 selections on the Environment Variable menu. Edit Environment Vari-able Set allows you to change an existing environment variable set. Select Default Environm...

Page 46 - automatically configure PCI devices.

Configuring for Windows NT 7–5 ARCSBIOS Setup. The option to Enable X86 Emulation is set default to Yes. This option allows an operating system to use the X86 emulator built into the ARCSBIOS to emulate the video BIOS built into most video adapters. The DIMM Bank Memory type set-tings can allow you ...

Page 47 - Upgrading the ARCSBIOS Firmware.; Installing Windows NT; A 100MB or larger hard drive

7–6 Configuring for Windows NT Upgrading the ARCSBIOS Firmware. 7.2.6 Print Configuration This option will dump the information in the configuration tree to the parallel port so that it may be printed. 7.2.7 Add-in Board Utilities This option allows you to run configuration utilities for add-in card...

Page 48 - Installing Windows NT

Configuring for Windows NT 7–7 Installing Windows NT 7.4.2 Before Installing Windows NT Before installing Windows NT, ensure that you have completed the following tasks: • In the Setup section of the bios use the Time and Date option to verify the correct time and date. (see Section 7.2.4). Note: So...

Page 49 - Flash and press Enter; Enter; Delete SCSI Miniport from Flash

7–8 Configuring for Windows NT Installing Windows NT 1.Insert the Windows NT4.0 install Floppy for the AlphaPC 164UX diskette into drive A: 2.From the main ARCSBIOS screen select Enter Setup.3.select Run a Program from the setup menu and press Enter.4.Type in: A:\miniport.exe and press Enter.5.Maint...

Page 50 - The next steps depend on the type of drives that you have.

Configuring for Windows NT 7–9 Installing Windows NT The following procedure supersedes the Starting Setup on a RISC-based computer section of the Microsoft Windows NT Installation Guide. To start the Windows NT Setup program:1. Insert the Windows NT CD in the CD-ROM drive.2. Restart your computer.3...

Page 56 - Troubleshooting; Check the connection to the ac outlet.

Troubleshooting 8–1 8 Troubleshooting This chapter contains information about trouble shooting hardware and software dur-ing AlphaPC 164UX startup. Technical support is available through e-mail. The address is [email protected]. 8.1 Hardware Startup Use the following troubleshooting steps if vi...

Page 57 - Beep Codes; Table 8–1 Beep Codes

8–2 Troubleshooting Beep Codes 3. Replace the keyboard. Note: If you have the network drivers installed, but do not have the AlphaPC 164UX connected to a network, there will be a noticable increase in the time it takes for NT to start-up after the login. This is caused by the net-work drivers having...

Page 58 - Safe ARCSBIOS; Table 8–2 Post Codes

Troubleshooting 8–3 Safe ARCSBIOS 8.4 Safe ARCSBIOS The safe ARCSBIOS provides an emergency recovery mechanism when the primary firmware image contained in the flash has been corrupted. When the flash memory has been corrupted, and no image can be loaded safely from the flash, you can run the safe A...

Page 59 - You can start the safe ARCSBIOS in one of two ways:

8–4 Troubleshooting Safe ARCSBIOS 8.4.1 Starting the Safe ARCSBIOS You can start the safe ARCSBIOS in one of two ways: • · If the primary firmware image is unavailable when the system is powered on or reset, the safe ARCSBIOS runs automatically. When the safe ARCSBIOS runs, the system will emit 1 lo...

Page 60 - Battery Recycle/Disposal Information; NOTICE; Replace batteries correctly to prevent possible explosion.

Battery Recycle/Disposal Information 9–1 9 Battery Recycle/Disposal Information NOTICE Recycle or dispose of batteries promptly in accordance with your organization’s environmental policies. If this is a LITHIUM battery, the following additional pre-cautions may apply: • Replace batteries correctly ...

Page 61 - Supporting Products; Table A–1 Samsung DIMM Part Number List

Supporting Products A–1 A Supporting Products This appendix lists sources for components and accessories that are not included with the AlphaPC 164UX. A.1 Memory Dual inline memory modules (DIMMs) are available from the following sources: Samsung Semiconductor Inc.3566 North First St.San Jose, CA 95...

Page 62 - Memory; Table A–2 VisionTek DIMM Part Number List

A–2 Supporting Products Memory Viking Components11 ColumbiaLaguna Hills,Ca 92656Phone: 800-338-2361Fax : 408-643-7250 QesTec, Inc.23 Midstate Drive, Suite 104Midstate Office ParkAuburn,Ma 01501Phone: 508-832-5006Fax: 508-832-5441 Table A–2 VisionTek DIMM Part Number List Size Part Number Width ECC 1...

Page 63 - Thermal Products; Table A–5 Dense-Pac Microsystems DIMM Part Number List

Supporting Products A–3 Thermal Products DeskStation Technology - Dist. for Dense-Pac15729 College BlvdLenexa, KS 66219Phone: 800-793-3375 A.2 Thermal Products Thermal Products Components included in this heat-sink and fan solution are heat sink, GRAFOIL pad, two hex nuts, heat-sink clips, 60-mm fan...

Page 64 - Enclosure

A–4 Supporting Products Enclosure A.4 Enclosure An enclosure, suitable for housing the AlphaPC 164UX and its power supply, is available from: Axxion 11 B Leigh FisherEl Paso,Tx. 79906Phone: 915-772-0360Fax: 915-778-3200PN: DL17 Addtronics Industrial43263 Osgood RoadFremont, Ca 94539Phone: 510-490-98...

Page 65 - Support,Products and Documentation

Support,Products and Documenta- B Support,Products and Documentation If you need technical support, an Alpha CPU brochure, or help deciding which docu-mentation best meets your needs, visit the Samsung Semicondcutor World Wide Web Internet site: http://www.samsungsemi.com You can also call or e-mail...

Page 66 - Samsung Alpha Products

B–2 Support,Products and Documentation Samsung Alpha Products To order the AlphaPC 164UX motherboard, contact your local distributor. The fol-lowing tables list some of the semiconductor products available from Samsung Elec-tronics. Motherboard kits include the motherboard and motherboard user’s man...

Page 67 - Samsung Alpha Documentation; The following table lists some of the available documentation.

Support,Products and Documentation B–3 Samsung Alpha Documentation The following table lists some of the available documentation. You can order the following associated documentation directly from the vendor. Title Order Number 21164 Alpha Microprocessor Hardware Reference Manual KP164-HR-1 21164 Al...