Salton JVPM1B - Manuals

Salton JVPM1B – Manual in PDF format online.

Manuals:

Manual

Manual Salton JVPM1B

Summary

Page 2 - THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions shouldalways be followed, including the following: • Read all instructions.• Do not touch hot surfaces. Use handles or knobs.• To protect against fire, electric shock, do not place cord, plugs, or appliance in water or...

Page 4 - Do not use an extension cord with this product.

4 POLARIZED PLUG: This appliance has a polarized plug, (oneblade is wider than the other). To reduce the risk of electric shock,this plug is intended to fit into a polarized outlet only one way. Ifthe plug does not fit fully in the outlet, reverse the plug. If it still doesnot fit, contact a qualifi...

Page 5 - Parts Identification; Your product may vary slightly from illustration.

5 5 Parts Identification Lever WaterDiffuser Adjustable Brew Spout (P/N 31156B, 31156W) Drip Tray (P/N 31157) Lid WaterTank (P/N 31160) Base Control Panel Over Flow Tray (P/N 31158B, 31158W) Pod Holder (P/N 31159B, 31159W) Pod Chamber (P/N 31163) Your product may vary slightly from illustration. 5-o...

Page 6 - Become familiar with all parts of the appliance.; Remove the Water Tank by pulling out and then up to remove

6 Before Using Your Pod Coffee Maker Become familiar with all parts of the appliance. Keep your Pod Coffee Maker cleanClean and descale your Pod Coffee Maker on a regular basis. See“Cleaning and Descaling”, pages 11-12. We recommend cleaningthe Water Tank and the Adjustable Brew Spout as well as the...

Page 7 - Lid is in fully raised position, see Figure 5.; Place the Adjustable Brew Spout inside the coffee maker.

7 2. Fill the Water Tank with fresh water up to the ‘Max’ line, and fit back into the Base (down and in) until it “snaps” into place, seeFigure 4. 3. Lift Lid by pulling out on the Lever. Top will pop up. Push back so Lid is in fully raised position, see Figure 5. 4. Place the Adjustable Brew Spout ...

Page 8 - Make sure the mouth of the Pod Chamber is inside the Adjustable; Brew Spout. Do not place a coffee pod in chamber. See Figure 6.; Place the Pod Holder so it sits securely on top of the Pod

8 5. Make sure the mouth of the Pod Chamber is inside the Adjustable Brew Spout. Do not place a coffee pod in chamber. See Figure 6. 6. Place the Pod Holder so it sits securely on top of the Pod Chamber, see Figure 7. 7. To close the Lid, press down firmly on the top of the Lid and hold in place whi...

Page 9 - Press the Power Light/Indicator Button to turn power on, then; Brewing Coffee; Fill the Water Tank with water up to the ‘MAX’ line. Never pour; Gently raise Lid to open position.

9 9. Press the Power Light/Indicator Button to turn power on, then simultaneously press the 5-Ounce Serving and 8-Ounce ServingButtons, see Figure 8. The water from the Water Tank will cycle through the coffee maker.NOTE: If unit goes unused for 3 or more days, please repeatabove process (steps 1-9)...

Page 10 - correct

10 6. Place one coffee pod inside the Pod Holder. Press lightly on the coffee pod to make sure it sits evenly in the Pod Holder. SeeFigures 9 and 10 for correct pod insertion. CAUTION: Use only pre-measured coffee pods in your Pod Coffee Maker. The use of loose ground coffee may result in inferior c...

Page 11 - Helpful Hints for Brewing; Note: If Water Tank becomes dry for 3 or more days, you must re-; Care and Cleaning; Remove the Pod Holder, Pod Chamber and Adjustable Brew

11 You may leave your coffee maker on if you intend to brew anothercup of coffee. The coffee maker will turn off automatically after onehour. Helpful Hints for Brewing Fresh WaterFor optimal results, use fresh water daily. If you haven’t used yourmachine for a few days, follow steps 1-9 in section “...

Page 12 - Rinse all parts with fresh water after cleaning.; Descaling; Follow the instructions given in “Before Using Your Pod Coffee; Brew Spout and wash thoroughly.; Repeat instructions in step 2 up to four times in order to flush

12 4. Remove the Drip Tray and Overflow Tray, see Figure 11. 5. Clean the Water Tank, Pod Holder, Pod Chamber, Adjustable Brew Spout, Drip Tray and Overflow Tray with hot water. If nec-essary, use a little dish soap.Note: The Pod Holder, the Drip Tray, Overflow Tray and theAdjustable Brew Spout may ...

Page 13 - Troubleshooting; There is less water than normal used during brew cycle.

13 Troubleshooting Should a problem occur, you may be able to find an answer in thetext below. If the text proves unhelpful or if you require fur therinformation, please contact Consumer Service. 1. The coffee is too weak. Check the following:• the pod is placed properly in the Pod Holder. You may n...

Page 14 - -2 minutes. If indicator light is flashing; The indicator light keeps flashing at rapid intervals.; • there must be enough water in the Water Tank. Fill the Water; To Order Coffee Pods

14 5. The indicator light is flashing. A flashing indicator light means the machine is heating. Thisnor mally lasts for 1 1/2 -2 minutes. If indicator light is flashing rapidly (more than a second apart), see #6 below. If the indicator light flashes continually for more than 4 minutes,contact Consum...

Page 15 - IMPORTANT NOTICE; If any parts are missing or defective,; DO NOT return this product.; Please call our Customer Service Department for assistance.

15 IMPORTANT NOTICE If any parts are missing or defective, DO NOT return this product. Please call our Customer Service Department for assistance. 800-577-1557 Monday - Friday 9:00 am - 5:00 pm CST Thank You LIMITED ONE YEAR WARRANTY Warranty: This product is warranted by Salton, Inc. to be free fro...