Ryobi VC722- Manuals

Page 2 - SAVE THESE INSTRUCTIONS

2 INTRODUCTION ■ ■ ■ ■ ■ Table of Contents / Introduction ........................................................................................................................ 2 ■ ■ ■ ■ ■ Impor tant Safety Instructions .................................................................................

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Service

3 IMPORTANT SAFETY INSTRUCTIONS ■ Do not abuse cord. Never carry charger or base bythe cord or yank to disconnect from electrical outlet.Grasp charger, not the cord, and pull to unplug. Donot allow cord to hang over edge of table or counteror to touch hot surfaces. ■ Do not use an extension cord unl...

Page 5 - SYMBOL MEANING; SAVE THESE INSTRUCTIONS; SYMBOLS

5 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and theexplanations with them, deserve your careful attention and understanding. The safety warnings do not bythemselves eliminate any danger. The instructions or warnings they give are not substitu...

Page 6 - FEATURES; KNOW YOUR HAND VAC

6 FEATURES KNOW YOUR HAND VAC See Figure 1. Before attempting to use your hand vac, familiarize your-self with all operating features and safety requirements. WARNING: Carefully read through this entire operator’s manualbefore using your new hand vac. Pay close attentionto the Important Safety Instr...

Page 7 - CHARGING YOUR HAND VAC; PRODUCT SPECIFICATIONS:; OPERATION

7 CHARGING YOUR HAND VAC The battery pack for your hand vac has been shipped in alow charge condition to prevent possible problems. There-fore, you should charge it overnight prior to use. NOTE: Batteries will not reach full charge the first timethey are charged. Allow several cycles (vacuuming fol-...

Page 8 - TO CHARGE HAND VAC USING CRADLE; CHARGING CRADLE

8 TO CHARGE HAND VAC USING CRADLE See Figure 5. ■ Charge hand vac only with the charger provided. ■ Place hand vac in cradle ensuring that charger plug,previously installed, is correctly connected to inputjack of the hand vac’s battery pack. See Figure 5 ■ Make sure power supply is normal householdv...

Page 9 - TO INSTALL BATTERY PACK

9 OPERATION Fig. 6 ON/OFF SWITCH See Figure 7. Follow these steps to turn the vacuum on and off. ■ To turn the vacuum on: Slide switch toward the frontof the vacuum. ■ To turn the vacuum off: Slide switch toward the backof the vacuum. Fig. 7 IMPORTANT INFORMATION FOR RE-CHARGING HOT BATTERIES When u...

Page 10 - TO REMOVE DUST BOWL; TO REATTACH DUST BOWL

10 OPERATION The dust bowl should be checked, emptied and cleanedperiodically to obtain maximum dust collection. TO REMOVE DUST BOWL See Figure 8. ■ Depress the release button located on top of handvac. Pull dust bowl down and out as shown to sepa-rate from motor housing. CLEANING YOUR HAND VAC See ...

Page 11 - ACCESSORIES; ADDING ATTACHMENTS

11 ACCESSORIES ADDING ATTACHMENTS See Figures 11, 12 and 13. The brush attachment and crevice tool have been pro-vided with your hand vac. These attachments can be easilysnapped into place on your hand vac. Storage space foryour brush attachment and crevice tool is convenientlylocated in the cradle;...

Page 12 - MAINTENANCE; BATTERIES; DISPOSAL OF THE EXHAUSTED BATTERY; R E

12 MAINTENANCE BATTERIES The battery pack for your hand vac is equipped with nickel-cadmium rechargeable batteries. Length of service fromeach charging will depend on the type of work you aredoing. The batteries in this tool have been designed to providemaximum trouble free life. However, like all b...

Page 13 - NOTES

Page 14 - RYOBI TECHNOLOGIES INC.; • SERVICE; MODEL NUMBER

OPERATOR'S MANUAL7.2 Volt Cordless Hand VacModel No. VC722 RYOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www.ryobitools.com Phone 1-800-525-2579 973000-077 6-02 • SERVICE Now that you have purchased your tool, should a need ever exist for ...