Ryobi S606D- Manuals

Page 2 - TABLE OF CONTENTS; DOUBLE INSULATION; INTRODUCTION

Page 2 TABLE OF CONTENTS ■ General Safety Rules .................................................................................................................................. 3-4 ■ Specific Safety Rules ................................................................................................

Page 3 - Read and understand all instructions.; GENERAL SAFETY RULES

Page 3 ■ Avoid accidental starting. Be sure switch is off beforeplugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites acci-dents. ■ Remove adjusting keys or wrenches before turningthe tool on. A wrench or a key that is left attached to a rota...

Page 4 - Additional Rules for Safe Operation; SAVE THESE INSTRUCTIONS

Page 4 GENERAL SAFETY RULES ■ Keep the tool and its handle dry, clean, and free fromoil and grease. Always use a clean cloth when clean- SPECIFIC SAFETY RULES ing. Never use brake fluids, gasoline, petroleum-basedproducts, or any strong solvents to clean your tool. ■ Make sure your extension cord is...

Page 6 - ELECTRICAL CONNECTION; FEATURES; SWITCH

Page 6 ELECTRICAL CONNECTION Your sander has a precision built electric motor. It should beconnected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will causea loss of power, and the motor wi...

Page 7 - INSTRUCTIONS; APPLICATIONS; PACKING LIST

Page 7 SPECIFICATIONS UNPACKING INSTRUCTIONS Your sander has been shipped completely assembled. ■ Carefully remove the tool and accessories from the box.Make sure that all items listed in the packing list areincluded. ■ Inspect the tool carefully to make sure no breakage ordamage occurred during shi...

Page 8 - INSTALLING NON-ADHESIVE SANDPAPER; INSTALLING ADHESIVE SANDPAPER; PAPER PUNCH; OPERATION

Page 8 WARNING: Your sander should never be connected to power supplywhen you assembling parts, making adjustments,assembling or replacing sandpaper, cleaning, or whennot in use. Disconnecting sander will prevent accidentalstarting that could cause serious personal injury. INSTALLING NON-ADHESIVE SA...

Page 10 - TO INSTALL DUST BAG

Page 10 ORBITAL MOTION Orbital motion is ideal for fast cutting action when removingold finishes, smoothing rough wood, cutting stock down torequired dimensions, or for finishing surfaces to be painted.As shown in figure 6, the sandpaper moves in tiny circles ata very high speed, allowing the sander...

Page 11 - MAINTENANCE

Page 11 WARNING: When servicing use only identical Ryobi replacementparts. Use of any other parts may create a hazard or causeproduct damage. GENERAL Avoid using solvents when cleaning plastic parts. Mostplastics are susceptible to various types of commercial solventsand may be damaged by their use....

Page 12 - DOUBLE INSULATED; • SERVICE; MODEL NUMBER

OPERATOR'S MANUAL1/4 SHEET SANDER – S606D DOUBLE INSULATED 983000-04402-03 . RYOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com • SERVICE Now that you have purchased your tool, should a need ever ex...