Ryobi RY08510- Manuals

6 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts. WARNING: SAVE TH...

7 FEATURES PRODUCT SPECIFICATIONS Weight ....................................................................................................................................................................... 10.4 lbs.Engine displacement .................................................................

9 ASSEMBLY Fig. 4 Fig. 3 ADAPTOR VACUUM BAG NOZZLE UPPER BLOWER TUBE UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or dama...

11 PREMIUM EXACT MIX™ (50:1) GASOLINE OIL 1 gallon (US) 2.6 oz. 1 Liter 20 cc (20 ml) FILLING THE TANK WARNING: Always stop the engine before filling the fuel tank. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from the refueling area before starting engine. Do not s...

12 OPERATION STARTING AND STOPPING See Figures 8 - 9. To start an engine that is cold or has run dry: n Fill the fuel tank, if necessary. Always use the proper oil/gasoline mixture. See “Mixing the Fuel” on page 11. n Disengage the cruise control lever. NOTE: Do not engage the throttle trigger durin...

13 n Operate blower at the lowest possible throttle speed to do the job. n Check your equipment before operation, especially the muffler, air intakes, and air filters. n Use rakes and brooms to loosen debris before blowing. n In dusty conditions, slightly dampen surfaces when water is available. n C...

14 Fig. 13 VACUUM OPERATION See Figure 13. WARNING: Never run the unit without the blower tubes installed or the vacuum door securely closed. Failure to do so could result in serious personal injury. n Install the vacuum tubes, vacuum handle, and bag. Refer to Installing the Vacuum Bag, Installing t...

15 MAINTENANCE REPLACING AND CLEANING AIR FILTER See Figure 14. A wet or dirty air filter can affect the way the engine starts, performs, and wears. The air filter should be checked and cleaned after 8 hours of operation. For best performance, the air filter should be replaced once each year.To clea...

16 WARNING: C u r re n t a t t a c h m e n t s a n d a c c e s s o r i e s a v a i l a b l e for use with this tool are listed. Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious pers...

17 WARRANTY LIMITED WARRANTY STATEMENT Ryobi Technologies, Inc. warrants to the original retail purchaser that this Ryobi Technologies, Inc. product is free from defect in material and workmanship and agrees to repair or replace, at Ryobi Technologies, Inc.’s discretion, any defective product free o...

18 RYOBI TECHNOLOGIES, INC. LIMITED WARRANTY FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS NON-ROAD AND SMALL OFF-ROAD ENGINES The U.S. Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and Ryobi Technologies, Inc. are pleased to explain the Emission Control System ...

19 EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST Emissions Parts Inspect Before Clean Every Replace Clean Every Replace Every Each Use 5 Hours Every 25 Hours 25 Hours 50 Hours or Yearly or Yearly CATALYTIC MUFFLER ASSEMBLY ......................................................................

983000-647 01-20-06 OPERATOR’S MANUAL BLOWER / VACUUM RY08510 WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. CALIFORNIA PROPOSITION 65 TECHTRONIC INDUSTRIES NORTH AMERICA, INC. 1428 Pearman...

6 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts. WARNING: SAVE TH...

7 FEATURES PRODUCT SPECIFICATIONS Weight ....................................................................................................................................................................... 10.4 lbs.Engine displacement .................................................................

9 ASSEMBLY Fig. 4 Fig. 3 ADAPTOR VACUUM BAG NOZZLE UPPER BLOWER TUBE UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or dama...

11 PREMIUM EXACT MIX™ (50:1) GASOLINE OIL 1 gallon (US) 2.6 oz. 1 Liter 20 cc (20 ml) FILLING THE TANK WARNING: Always stop the engine before filling the fuel tank. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from the refueling area before starting engine. Do not s...

12 OPERATION STARTING AND STOPPING See Figures 8 - 9. To start an engine that is cold or has run dry: n Fill the fuel tank, if necessary. Always use the proper oil/gasoline mixture. See “Mixing the Fuel” on page 11. n Disengage the cruise control lever. NOTE: Do not engage the throttle trigger durin...

13 n Operate blower at the lowest possible throttle speed to do the job. n Check your equipment before operation, especially the muffler, air intakes, and air filters. n Use rakes and brooms to loosen debris before blowing. n In dusty conditions, slightly dampen surfaces when water is available. n C...

14 Fig. 13 VACUUM OPERATION See Figure 13. WARNING: Never run the unit without the blower tubes installed or the vacuum door securely closed. Failure to do so could result in serious personal injury. n Install the vacuum tubes, vacuum handle, and bag. Refer to Installing the Vacuum Bag, Installing t...

15 MAINTENANCE REPLACING AND CLEANING AIR FILTER See Figure 14. A wet or dirty air filter can affect the way the engine starts, performs, and wears. The air filter should be checked and cleaned after 8 hours of operation. For best performance, the air filter should be replaced once each year.To clea...

16 WARNING: C u r re n t a t t a c h m e n t s a n d a c c e s s o r i e s a v a i l a b l e for use with this tool are listed. Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious pers...

17 WARRANTY LIMITED WARRANTY STATEMENT Ryobi Technologies, Inc. warrants to the original retail purchaser that this Ryobi Technologies, Inc. product is free from defect in material and workmanship and agrees to repair or replace, at Ryobi Technologies, Inc.’s discretion, any defective product free o...

18 RYOBI TECHNOLOGIES, INC. LIMITED WARRANTY FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS NON-ROAD AND SMALL OFF-ROAD ENGINES The U.S. Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and Ryobi Technologies, Inc. are pleased to explain the Emission Control System ...

19 EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST Emissions Parts Inspect Before Clean Every Replace Clean Every Replace Every Each Use 5 Hours Every 25 Hours 25 Hours 50 Hours or Yearly or Yearly CATALYTIC MUFFLER ASSEMBLY ......................................................................

983000-647 3-05 OPERATOR’S MANUAL BLOWER / VACUUM RY08510 WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. CALIFORNIA PROPOSITION 65 TECHTRONIC INDUSTRIES NORTH AMERICA, INC. 1428 Pearman Dai...