Ryobi RMS10- Manuals

5 Fig. 2 PREPARING THE STAND See Figure 2.  Lay the stand’s top surface down on the floor with the folded legs on top.  Push in a leg locking pin and rotate that leg up until the locking pin clicks into place.  Repeat with the remaining three legs.  Lift the stand and place it in an upright posi...

6 INSTALLING EXTENSION RAILS See Figures 3 - 4.  Depress the locking pin and slide the extension rail into the opening on the end of the stand.  Repeat with the other extension rail on the opposite side of the stand.  Install two of the adjustment knobs into the ends of the stand as shown. Tighte...

7 OPERATION WARNING: Do not allow familiarity with tools to make you care-less. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects bein...

ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com 987000-9811-14-10 (REV:01) MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always w...