Page 3 - IMPORTANT SAFETY INSTRUCTIONS
3 WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING: To reduce the risk of electric shock DO NOT expose to rain. Store indoors. ...
Page 5 - SAVE THESE INSTRUCTIONS
5 SAVE THESE INSTRUCTIONS Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the hand vac’s operation. If damaged, have the hand vac serviced before using. Many accidents are caused by poorly maintained hand vacs. Use only accessories th...
Page 6 - SYMBOLS
6 SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Min...
Page 7 - SERVICE
7 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest A U T H O R I Z E D S E R V I C E C E N T E R f o r re p a i r. W h e n servicing, use only identical replaceme...
Page 8 - FEATURES
8 FEATURES PRODUCT SPECIFICATIONS Motor .......................................................................................................................................................................... 18V DCCharger Input ........................................................................
Page 9 - ASSEMBLY; UNPACKING
9 WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alte...
Page 10 - OPERATION; CHARGING A COOL BATTERY PACK
10 WARNING: Do not allow familiarity with the product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects...
Page 11 - CHARGING A HOT BATTERY PACK; TO INSTALL BATTERY PACK
11 OPERATION CHARGING A HOT BATTERY PACK When using the product continuously, the batteries in the battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, this will caus...
Page 12 - ADDING ATTACHMENTS; MAINTENANCE; GENERAL MAINTENANCE
12 WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during product operation or when blowing dust. If operation is dusty, also wear a dust mask. W...
Page 13 - CLEANING THE HAND VAC
13 MAINTENANCE PRESS RELEASE BUTTON PULL DUST BOWL DOWN AND OUT TO REMOVE Fig. 7 CLEANING THE HAND VAC See Figures 7 - 9. The dust bowl should be checked, emptied, and cleaned periodically to obtain maximum dust collection. REMOVING THE DUST BOWL See Figure 7. �Remove the battery pack from the vac...
Page 14 - OPERATOR’S MANUAL; 8V CORDLESS DRY HAND VAC
14 • PARTS AND SERVICE Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. • MODEL NUMBER • SERIAL NUMBER • HOW TO OBTAIN REPLACEMENT PARTS: Replacement parts can be purchased online at www.ryobitools.com or by calling ...