Ryobi P330-PCL525B - Manuals

Page 2 - GENERAL POWER TOOL SAFETY WARNINGS; WARNING

2 — English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnin...

Page 3 - BATTERY TOOL USE AND CARE; NAILER SAFETY WARNINGS

3 — English GENERAL POWER TOOL SAFETY WARNINGS  Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly mai...

Page 4 - OPERATION

4 — English NAILER SAFETY WARNINGS necessary hearing protection is provided and used by the operator and others in the work area. Some environments will require the use of head protection equipment. When required, the employer and user must ensure that head protection conforming to ANSI Z89.1-1997 i...

Page 5 - LOADING TOOL; SAVE THESE INSTRUCTIONS

5 — English NAILER SAFETY WARNINGS  Choice of triggering method is important. Check manual for triggering options.  Do not hold the tool by the front of the magazine. Do not put hands, head, or other parts of your body near the bottom of the magazine where the nail exits the tool, as serious perso...

Page 6 - SYMBOLS

6 — English Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury haza...

Page 7 - GLOSSARY; CALIFORNIA PROPOSITION 65

7 — English GLOSSARY Activate (operating controls) To move an operating control so that it is in a position that allows the tool to be actuated or that satisifes one requirement for the tool to be actuated. Actuate (tool) To cause movement of the tool component(s) intended to drive a fastener. Actua...

Page 8 - FEATURES; PRODUCT SPECIFICATIONS; ASSEMBLY; APPLICATIONS; INSTALLING/REMOVING BATTERY PACK; NOTICE

8 — English FEATURES PRODUCT SPECIFICATIONS Motor ..................................................................18 Volt DCMagazine Capacity ............................................... 105 Nails Nail Type ...............................................................15 gaugeFinish Nail Lengt...

Page 9 - LOADING THE TOOL WITH NAILS

9 — English OPERATION  To remove , locate latches on both sides of battery pack and depress to release battery pack from the tool.  The battery pack will disconnect in direction to be removed when latches are depressed. NO-MAR PAD See Figure 3, page 13. The no-mar pad attached to the nose of the t...

Page 11 - PROBLEM; NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 12

11 — English OPERATION The driver mechanism can usually be returned to its operating position by depressing the workpiece contact against a scrap piece of wood and squeezing the trigger. If this does not automatically return the driver mechanism into the tool, the tool may be jammed.If a nail or fas...