Ryobi P301- Manuals

Page 3 - GENERAL SAFETY RULES; ELECTRICAL SAFETY

3 GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONSWORK AREA  Keep your work area clean and well lit. Cluttered benches and dark areas invite...

Page 4 - SERVICE

4  Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.  Know your power tool. Read operator’s manual carefully. Learn its app...

Page 5 - SAFETY RULES FOR CHARGER; IMPORTANT SAFETY INSTRUCTIONS; SAVE THESE INSTRUCTIONS

5  An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b....

Page 6 - SYMBOLS

6 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes T...

Page 7 - CAUTION

7 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, ...

Page 8 - FEATURES; PRODUCT SPECIFICATIONS

8 FEATURES PRODUCT SPECIFICATIONS Motor ..................................................................18 Volt DCSwitch ................................................... Single Shot TriggerMagazine Capacity ............................................... 84 stapleStaple Speed .....................

Page 9 - ASSEMBLY; UNPACKING; OPERATION; APPLICATIONS

9 ASSEMBLY UNPACKING This product has been shipped completely assembled.  Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the tool carefully to make sure no breakage or damage occurred during shipping.  Do not ...

Page 10 - CHARGING A HOT BATTERY PACK

10 LED FUNCTIONS OF CHARGERLED WILL BE ON TO INDICATE STATUS OF CHARGER AND BATTERY PACK:  Red LED on = Fast charging mode.  Green LED on = Fully charged and in maintenance charge mode.  Green LED on = When battery pack is inserted into charger, indicates hot battery pack or that battery pack is ...

Page 11 - TO INSTALL BATTERY PACK

11 LATCH OPERATION Fig. 3 BATTERY PACK LATCHES DEPRESS LATCHES TO RELEASE BATTERY PACK Fig. 4 STAPLES Fig. 5 NOTE: This situation only occurs when continuous use of the tool causes the batteries to become hot. It does not occur under normal circumstances. Refer to CHARGING A COOL BATTERY PACK for no...

Page 12 - REMOVING A JAMMED STAPLE

12 90 OPERATION Fig. 7 SETTING DEPTH See Figure 6. The depth adjustment knob increases or decreases the force with which a staple is driven into the workpiece.  Rotate the depth adjustment knob clockwise to increase the force.  Rotate depth adjustment knob counterclockwise to decrease the force. ...

Page 13 - MAINTENANCE; BATTERIES; GENERAL MAINTENANCE

13 MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear...

Page 14 - • MODEL NUMBER; OPERATOR’S MANUAL

14 ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center. Be sure to provide all per...