Ryobi LCDI18022- Manuals

3 English ASSEMBLy  Slide depth guide clamp into notch in collar. Clamp holds depth rod firmly in place. NOTE: When properly installed, the teeth on the depth stop rod should be aligned with the teeth indicator on the depth stop rod clamp.  Thread auxiliary handle onto screw and secure tightly. NO...

4 English OPERATION  Place the battery pack on the tool.  Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool before beginning operation. WARNING Always remove battery pack from your tool when you are assembling parts, making adjustmen...

5 English OPERATION TWO-SPEED GEAR TRAIN (HI-LO) See Figure 6. The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2 ) speeds. A slide switch is located on top of the drill to select either LO (1) or HI (2) speed. When using drill in the LO (1) speed range, speed w...

7 English OPERATION WARNING : Be prepared for binding at bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through material. If not prepared, this loss of control can result in poss...