Ryobi EMM0001- Manuals

Page 3 - GENERAL SAFETY RULES

2 3 GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Fail- ure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. CAUTION: Use of controls or adjustments or performance of pro-cedures other than those specified herein may re...

Page 4 - SYMBOLS

4 5 Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols will allow you to operate the tool better and safer. Read The Operator’s Manual Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands Symbol ...

Page 5 - SERVICE; SAVE THESE INSTRUCTIONS

4 5 SYMBOLS SERVICE This unit has no serviceable parts. If the unit fails due to normal wear and tear within two years of purchase, return with original receipt for a replacement unit at no charge. Call 1-800-525-2579 for your nearest RYOBI AUTHORIZED SERVICE CENTER. WARNING: To avoid serious person...

Page 6 - FEATURES; PRODUCT SPECIFICATIONS

6 7 FEATURES PRODUCT SPECIFICATIONS Vacuum Base Recommended Use................................................................................................................................................ Indoors Power Supply ..........................................................................

Page 8 - ASSEMBLY; UNPACKING; OPERATION; APPLICATIONS

8 9 ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do no...

Page 9 - TURNING THE VACUUM BASE ON/OFF; VACUUM BASE; ROUGH-SURFACE ADAPTOR

8 9 OPERATION TURNING THE VACUUM BASE ON/OFF See Figure 4. Press the button located on the side of the vacuum base to turn it ON and OFF . Always wait for at least 5 seconds between stopping and restarting the unit. USING THE AIR-GRIP ™ VACUUM BASE See Figures 5 - 6. Vacuum grip technology allows th...

Page 10 - USING THE MULTI-FUNCTION BASE

10 11 OPERATION USING THE MULTI-FUNCTION BASE See Figures 8 - 9. To use the hook-and-loop strap or magnetic mounts, the multi-function base must be installed. To install the base: n While holding the vacuum base with the on/off button facing you, align the raised ridge on the multi-function base wit...

Page 11 - REMOVING/INSTALLING ATTACHMENTS

10 11 OPERATION REMOVING/INSTALLING ATTACHMENTS See Figure 11. To install an attachment on the vacuum base, align the lock-ing tabs on the desired attachment to the openings on the vacuum base so the molded-in arrow is directly centered above the battery door. Seat the attachment on the base and rot...

Page 13 - MAINTENANCE; GENERAL MAINTENANCE

12 13 MAINTENANCE WARNING: To avoid serious personal injury, always remove the batteries from the tool when cleaning or performing any maintenance. GENERAL MAINTENANCE n Before initial use, wipe AIRgrip vacuum base with a damp cloth to remove any residue. n Store the unit indoors. n When not in use,...

Page 14 - TROUBLESHOOTING; Problem

14 15 TROUBLESHOOTING Problem Possible Cause Solution Vacuum not running Batteries are lowPower is turned off Replace batteries.Press on/off button. Laser line projection is weak Batteries are low Replace batteries. Laser line is hard to see Light in area is too bright Dim light in the work area or ...

Page 15 - NOTES

Page 16 - OPERATOR’S MANUAL; AIRgrip MultiTASKit

16 RYOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com 983000-801 7-05 • SERVICE This product has no serviceable parts. If unit fails due to normal wear and tear within two years of purchase, retur...

Manuals:

User Manual Ryobi EMM0001

Summary

Ryobi Manuals