Ryobi D46C- Manuals

− English SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power...

− English The following signal words and meanings are intended to explain the levels of risk associated with this product. DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, ...

− English ELECTRICAL EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of pow...

− English FEATURES PRODUCT SPECIFICATIONS Chuck ....................................................................... 3/8 in. Switch ............................. Variable Speed Reversible ( VSR) Clutch ............................................................. 24 Positions KNOW YOUR DRILL See ...

− English WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this product or create acces-sories not recommended for use with this product. Any ...

10 − English DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) See Figure 2. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the l...

11 − English OPERATION WARNING: Make sure to insert the drill bit straight into the chuck jaws. Do not insert the drill bit into the chuck jaws at an angle then tighten, as shown infigure 6. This could cause the drill bit to be thrown from the drill, resulting in possible serious personal injury or ...

1 − English OPERATION ADJUSTABLE TORQUE CLUTCH See Figure 8. This product is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using. ADJUSTING TORQUE See Figure 8...

1 − English MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, ...

1 − English MAINTENANCE CHUCK REMOVAL See Figures 10 - 12. The chuck may be removed and replaced with a new one.  Unplug the drill.  Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely.  Tap the hex key sharply with a mallet in a clockwise di- recti...

983000-808-1-0 (REV:0) D46C • PaRts anD sERVicE Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. • MODEL nUMBER ____________________ • sERiaL nUMBER ____________________ • HOw tO OBtain REPLacEMEnt PaRts: Replacement...

7 EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart t...

8 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Chuck ....................................................................... 3/8 in. Switch ............................. Variable Speed Reversible ( VSR) Clutch ............................................................. 24 Positions SWITCH TRIGGER DIRECT...

9 WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accesso-ries not recommended for use with this tool. Any such alteration o...

10 DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) See Figure 2. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the...

11 OPERATION INSTALLING BITS See Figure 5 - 6.  Unplug the drill.  Open or close the chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the chuck jaws.  Insert the drill ...

12 OPERATION TO INCREASE TORQUE Fig. 8 TO DECREASE TORQUE TORQUE ADJUSTMENT RING ADJUSTABLE TORQUE CLUTCH See Figure 8. This product is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the...

13 WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask...

14 MAINTENANCE Fig. 10 Fig. 11 Fig. 12 SCREWDRIVER HEX KEY KEYLESS CHUCK MALLET CHUCK JAWS CHUCK REMOVAL See Figures 10 - 12. The chuck may be removed and replaced with a new one.  Unplug the drill.  Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securel...

16 ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com 983000-808 01-09-05 (REV:00) • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Cente...