Ryobi BGH625 - Manuals - manualsarea.com

Page 3 - RULES FOR SAFE OPERATION; READ ALL INSTRUCTIONS

Page 3 RULES FOR SAFE OPERATION Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your bench grinder works. READ ALL INSTRUCTIONS n KNOW YOUR POWER...

Page 5 - IMPORTANT

Page 5 RULES FOR SAFE OPERATION The operation of any grinder can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We ...

Page 6 - EXTENSION CORDS; ELECTRICAL; UNPACKING

Page 6 CAUTION: Keep the cord away from the grinding area and position the cord so that it will not be caught on material, tools, or other objects. GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk...

Page 7 - LOOSE PARTS LIST – BGH625; LOOSE PARTS LIST; LOOSE PARTS LIST – BGH615; LOOSE PARTS LIST – BGH825; TOOLS NEEDED

Page 7 n Washers (6 mm) ........................................................... 2 n Washers (8 mm) ........................................................... 6 n Hex Bolts (6 mm x 6) ................................................... 2 n Hex Bolts (8 mm x 8) ......................................

Page 11 - ASSEMBLY; SPARK DEFLECTOR – BGH615

Page 11 ASSEMBLY WARNING: Always disconnect the bench grinder from the power source before performing any assembly or adjustment. Failure to do so could result in accidental starting result-ing in possible serious personal injury. SPARK DEFLECTOR – BGH615 See Figure 4a. Using two 6 mm hex bolts and ...

Page 12 - SHIELD BRACKET ASSEMBLY; MOUNTING SAFETY SHIELDS

Page 12 ASSEMBLY Fig. 6b HEX BOLT BGH615 BGH625 WASHER CLAMP BRACKET SHIELD ROD BGH825 SHIELD BRACKET ASSEMBLY See Figure 5. Note: The hardware used for assembling the safety shields to the shield brackets has been preassembled and prepackaged. Remove the two phillips head screws, washers, and hex n...

Page 14 - OPERATION; LAWN MOWER BLADES

Page 14 BASIC OPERATION WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, wear a dust mask. To be efficient and work as designed, your tools should be kept sharp. Dull tools can and will cause accidents. B...

Page 15 - CHISELS AND SCREWDRIVER BLADES

Page 15 CHISEL SHARPENING CHISELS AND SCREWDRIVER BLADES See Figure 10. When sharpening chisels and screwdrivers, work rest should support the chisel at the correct angle against the wheel. WARNING: Always disconnect the bench grinder from the power source before performing any assembly or adjustmen...

Page 16 - WHEEL DRESSER; MAINTENANCE

Page 16 GENERAL Keep the bench grinder clean. Remove dust from working parts and beneath the grinder frequently.Make sure the bench grinder operates properly. Check screws, nuts, and bolts for tightness. EXTENSION CORDS The use of any extension cord will cause some loss of power. To keep the loss to...

Page 17 - NOTES

Page 18 - RYOBI TECHNOLOGIES INC.; • SERVICE; • SERIAL NUMBER; EXTENSION CORD CAUTION

972000-880 7-04 RYOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625Post Office Box 1207 Anderson SC 29622-1207 Phone 1-800-525-2579 OPERATOR'S MANUALBench Grinder Models BGH615/BGH625/BGH825 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or ...

Ryobi BGH625 - Manuals

Manuals:

Manual Ryobi BGH625

Summary

Ryobi Manuals