Ryobi AG452- Manuals

7 EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart t...

8 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Wheel Size ............................................................. 4 1/2 in.Cord Length ............................................................... 10 ft.Arbor Size ................................................ 5/8 in. x 11 UNC No Load Speed .......

9 ASSEMBLY UNPACKING This product requires assembly.  Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the tool carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing ...

10 Fig. 3 LOCK-ON BUTTON SWITCH TRIGGER WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failur...

11 OPERATION WARNING : Always install grinding wheel and abrasive mop disc with the depressed center against the disc flange as shown below. Failure to do so will cause the grinding wheel to crack when tightening the nut. This could result in serious personal injury because of loose particles breaki...

13 ADJUSTMENTS WARNING: Before performing any adjustment, make sure the tool is unplugged from the power supply and the switch is in the OFF ( O ) position. Failure to heed this warning could result in serious personal injury. GUARD ADJUSTMENT See Figure 9 - 11. Never use the angle grinder without t...

14 Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commu-tators, etc. Consequently, we do not recommend using thi...

15 MAINTENANCE GUARD REPLACEMENT See Figure 13. After extended use, the guard may become worn and need adjustment or replacing. Or, if you drop the angle grinder and damage the guard, it may be necessary to replace it. To replace the guard:  Unplug the angle grinder.  Depress spin dle lock button ...

16 ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center. Be sure to provide all per...

7 EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart t...

8 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Wheel Size ............................................................. 4 1/2 in.Cord Length ............................................................... 10 ft.Arbor Size ................................................ 5/8 in. x 11 UNC No Load Speed .......

9 ASSEMBLY UNPACKING This product requires assembly.  Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the tool carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing ...

10 Fig. 3 LOCK-ON BUTTON SWITCH TRIGGER WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failur...

11 OPERATION WARNING : Always install grinding wheel and abrasive mop disc with the depressed center against the disc flange as shown below. Failure to do so will cause the grinding wheel to crack when tightening the nut. This could result in serious personal injury because of loose particles breaki...

13 ADJUSTMENTS WARNING: Before performing any adjustment, make sure the tool is unplugged from the power supply and the switch is in the OFF ( O ) position. Failure to heed this warning could result in serious personal injury. GUARD ADJUSTMENT See Figure 9 - 11. Never use the angle grinder without t...

14 Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commu-tators, etc. Consequently, we do not recommend using thi...

15 MAINTENANCE GUARD REPLACEMENT See Figure 13. After extended use, the guard may become worn and need adjustment or replacing. Or, if you drop the angle grinder and damage the guard, it may be necessary to replace it. To replace the guard:  Unplug the angle grinder.  Depress spin dle lock button ...

16 ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center. Be sure to provide all per...