Ryobi 4950301- Manuals

Page 2 - TABLE OF CONTENTS

Page 2 ■ Rules for Safe Operation ............................................................................................................................................ 3-4 ■ Unpacking ................................................................................................................

Page 3 - READ ALL INSTRUCTIONS; RULES FOR SAFE OPERATION

Page 3 Safe operation of this accessory requires that you read andunderstand this operator's manual, the operator’s manual forthe table saw and all labels affixed to the tool. READ ALL INSTRUCTIONS ■ KNOW YOUR ACCESSORY. Read the operator's manualcarefully. Learn the product's applications and limit...

Page 4 - SAVE THESE INSTRUCTIONS; NO HANDS

Page 4 SAVE THESE INSTRUCTIONS RULES FOR SAFE OPERATION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanationswith them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate anydanger. T...

Page 5 - INTRODUCTION; UNPACKING; INFORMATION

Page 5 INTRODUCTION This kit gives you the capability of mounting a router onthe accessory table of your saw. A router mounted onthe accessory table will provide expanded capabilitiesfor making rabbets, grooves, chamfers, dovetails, andmortise and tenon joints. The additional versatility gained from...

Page 6 - LOOSE PARTS; LIST OF LOOSE PARTS

Page 6 LOOSE PARTS DESCRIPTION QUANTITY DESCRIPTION QUANTITY LIST OF LOOSE PARTS Your #4950301 Router Mounting Kit includes the following parts: Fig. 1 GUIDE FENCE BRACKET WITH GUIDE BLOCK 1/2 in. KNOB BOLTS 5/16 in. WASHERS THROAT PLATES ROUTER MOUNTING PLATE TABLE CLAMPING BRACKET 5/16 in. T-NUTS ...

Page 7 - ASSEMBLY; IMPORTANT; : Five T-nuts should be in the top channel of the

Page 7 ASSEMBLY WARNING: The saw's motor cord must be disconnected fromthe receptacle on the saw when using this kit. Thepower cord of the router must be plugged into thereceptacle on the saw. The saw's master switchmust be used to turn the router ON and OFF.Failure to do so could result in serious ...

Page 8 - TO INSTALL GUIDE FENCE BRACKETS:

Page 8 ASSEMBLY Fig. 4 GUARD/DUST COVER WITH PIVOT ASSEMBLY KNOB NUT FLATS ON POST POST KNOB BOLTS 5/16 in. WASHERS GUIDE FENCE BRACKET RIP FENCE T-NUTS CARRIAGE BOLT (NOT SHOWN) SPACER Fig. 5 ROUTER MOUNTING SCREWS ROUTER MOUNTING PLATE ROUTER WITH 2–HOLE PATTERN SUBBASE ROUTER BASE TO INSTALL GUID...

Page 10 - : The clearance needed for mounting a router

Page 10 Fig. 9 Fig. 10 4–HOLE ROUTER WITH MOUNTING PLATE ATTACHED ROUTER MOUNTING SCREWS FRONT OF ROUTER ROUTER MOUNTING PLATE ROUTER WITH 4–HOLE PATTERN T O A S S E M B L E R O U T E R S W I T H 4 - H O L EPATTERN TO ROUTER MOUNTING PLATE: See Figures 9 and 10. For Ryobi routers, model numbers RE60...

Page 11 - ROUTER MOUNTING; TO INSTALL ROUTER BIT AND THROAT PLATE:; TO INSTALL TABLE CLAMPING BRACKET:

Page 11 ROUTER MOUNTING T O M O U N T R O U T E R W I T H P L A T E T OACCESSORY TABLE: ■ Place the router with the mounting plate under theaccessory table. See Figure 11. ■ Secure the mounting plate to accessory table usingthe four #1/4-20 x 1/2 in. flat head screws provided. NOTE: The accessory ta...

Page 12 - OPERATION; FINAL PREPARATION FOR OPERATION

Page 12 ROUTER MOUNTING around the raised portion on the underside of theaccessory table, clamping it tightly against the rearrail. ■ Secure with a 5/16 in. washer and 5/16-18 x 3/4 in.knob bolt. ■ Tighten knob bolt securely. FINAL ASSEMBLY: After the router mounting parts have been assembled,your s...

Page 13 - NOTES

Page 15 - PARTS LIST; KEY

Page 15 4950301 ROUTER MOUNTING KIT Now that you have purchased your Router Mounting Kit, should a need ever exist for repair parts or service,simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts whenyou call or visit. PARTS LIST KEY PART NO NUMBER DESC...

Page 16 - RYOBI TECHNOLOGIES INC.; PARTS AND SERVICE; MODEL NUMBER; WARRANTY

RYOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson SC 29625 Post Office Box 1207 Anderson SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com 983000-155 OPERATOR'S MANUAL #4950301 ROUTER MOUNTING KIT(FOR USE WITH THE BT3000 AND BT3100 TABLESAWS PARTS AND SERVICE For parts or service, contact...