Ryobi 4060300- Manuals

Page 2 - READ ALL INSTRUCTIONS; RULES FOR SAFE OPERATION

2  Introduction ....................................................................................................................................................................... 2  Rules For Safe Operation .........................................................................................

Page 3 - SAFETY AND INTERNATIONAL SYMBOLS; SYMBOL; MEANING

3 SYMBOLS SAVE THESE INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or w...

Page 4 - UNPACKING; LOOSE PARTS

4 UNPACKING Your new long miter/rip fence kit includes a 41 in. extension rail, plus the necessary brackets, and connecting hardware required to assemble a long miter fence and attach it to the sliding miter table of your BT3000/BT3100/BT3100-1 table saw. It also includes connectors and hardware req...

Page 5 - TO ASSEMBLE THE LOCATOR PIN

5 WARNING: The table saw should never be connected to a power supply when you are assembling parts. Disconnecting the saw will prevent accidental starting that could cause serious personal injury. TOOLS NEEDED You need an adjustable wrench and phillips screwdriver to assemble this accessory. ASSEMBL...

Page 6 - ASSEMBLE THE SAW GAGES; ASSEMBLE THE SUPPORT BRACKET; ASSEMBLE THE POSITIVE STOP BRACKET; ASSEMBLY; ASSEMBLE THE WORK SUPPORT BRACKET; COMPLETED LONG MITER FENCE ASSEMBLY

6 ASSEMBLE THE SAW GAGES See Figure 3 .  Place a saw gage into each end of the long miter fence rail. Correct orientation of the saw gage to the rail is important. Align the slot in the saw gage with the slot in the rail.  Secure both saw gages to the rail with the plastite screws provided. The lo...

Page 8 - ASSEMBLE THE LONG RIP FENCE; COMPLETED LONG RIP FENCE ASSEMBLY

8 This kit also includes connectors and hardware required for attaching a long rip fence to your saw. If you have been using this kit as a long miter fence, it will be necessary to remove all connectors, brackets, hardware, etc. If you are assembling for the first time, proceed as follows. ASSEMBLE ...

Page 9 - Long Miter/Rip Fence Kit; PARTS LIST; Key Part; * STANDARD HARDWARE ITEM — MAY BE PURCHASED LOCALLY

9 Now that you have purchased your Long Miter/Rip Fence Kit , should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. RYOBI LONG MITER/RIP FENCE KIT NO. 4060300 PARTS LIST Key Pa...

Page 10 - • MODEL NUMBER

10 RYOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com 972000-218 10-03 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nea...

Manuals:

User Manual Ryobi 4060300

Summary

Ryobi Manuals