Ryobi 290r 2- Manuals

Page 2 - SOLID CARBIDE/Hm Massiv; Euro

S ∅ 6 D B L A101.031.R 3 11 65 £ SOLID CARBIDE/Hm Massiv 11 Catalog 2001 DOUBLE FLUSH TRIMMING BITSGerade - Dichtungs - Nutfräser doppelseitig ART. A101 L D D B B S ∅ 6 S ∅ 6,4 (1/4”) S ∅ 8 D B L Z B102.048.R £ 4,8 16 55 2+1 A102.050.R £ C102.050.R £ 5 16 55 2+1 A102.060.R £ B102.060.R £ C102.060.R ...

Page 11 - SUPPLIED WITH BALL BEARING SET/Mit Kugellagersatz

T.C.T. RABBETTING BITS WITH BALL BEARINGHM Falzfräser mit Anlauflager S ∅ 6 S ∅ 6,4 (1/4”) S ∅ 8 D B E L A121.240.R B121.240.R C121.240.R 24 13 4 54 BALL BEARING/Kugellager SPRING WASHER/Federring SCREW/Schraube Z050.011.N Z054.003.N Z051.004.R A121.317.R B121.317.R C121.317.R 31,7 13 9,5 51 A121.35...

Page 28 - PATENT

T.C.T. DOUBLE RADIUS BITS WITH BALL BEARING GUIDEHM Profilfräser mit Doppel-Kugellager S ∅ 6 S ∅ 6,4 (1/4”) S ∅ 8 D R B L A170.285.R B170.285.R C170.285.R 28,5 6,4 14 66 A170.320.R B170.320.R C170.320.R 32 8 17 69 A170.350.R B170.350.R C170.350.R 35 9,5 20 72 BALL BEARING/Kugellager LOCK RING/Stellr...

Page 32 - RH ROTATION/Rechtsgang

T.C.T. BORING BITSHM Zylinderkopfbohrer RH ROTATION/Rechtsgang D L S C192.250.R 25 57 8 C192.260.R 26 57 8 C192.300.R 30 57 8 C192.350.R 35 57 8 ART. C192 WITHOUT SPURSohne Vorschneider D L S HSS COUNTERSINKSHSS Kegel-und Entgratsenker S ∅ 8x30 D L C240.160.R 16 55 C240.240.R 24 75 ART. C240 L D 90 ...

Page 59 - SPARE RINGS/ Ersatzringe

T.C.T. RABBETING BITS WITH BALL BEARING GUIDEHM Falzfräser mit Anlauflager S ∅ 12 S ∅ 12,7 (1/2“) D D 1 B E L E150.510.R G150.510.R 51 19 22,5 16 78 BALL BEARING/Kugellager Z050.007.N SPARE RINGS/ Ersatzringe D 1 E Z050.901.N 14,3 18,25 Z050.902.N 16 17,5 Z050.903.N 19 16 Z050.904.N 20,6 15,2 Z050.9...

Page 72 - Fresa

T.C.T. FINGER JOINT ASSEMBLY WITH BALL BEARING GUIDEHM Verleimfräser mit Anlauflager S ∅ 12 S ∅ 12,7 (1/2“) D B L E180.397.R G180.397.R 39,7 36 96 SPARE PARTS/Ersatzteile: 1) ARBOR/Spindel S ∅ 12 S ∅ 12,7 (1/2“) E117.120.N G117.120.R 2) BALL BEARING/Kugellager (1 je/ each ) - ∅ 28/ ∅ 8 x 9 mm Z050.0...

Page 74 - COMBINATIONS

T.C.T. SLOT CUTTER SET WITH BALL BEARING GUIDENut - Feder - Garnitursatz S ∅ 12 S ∅ 12,7 (1/2“) D B L Z E E182.476.R G182.476.R 47,6 3,2÷18 76 2 12,8 SPARE PARTS/Ersatzteile: 1) ARBOR/Spindel S ∅ 12 S ∅ 12,7 (1/2“) E117.123.N G117.123.R 2) BALL BEARING/Kugellager (1 je/ each ) - ∅ 22/ ∅ 8 Z050.008.N...

Page 87 - PLANER HEAD/Hobelkopf

LAMINATE CUTTERAnritz-Schneidemesser ITEM/Artikel Y100.001.R TIPO 1 TWO IDENTICAL KNIVES FOR CUTTING PLASTIC MATERIALS, LAMINATES ETC.Zwei identische kleine Messer zum Schneiden von: Kunststoff, Schichtpresstoff Y100.002.R TIPO 2 TWO DIFFERENT KNIVES FOR CUTTING: SIDE A: LAMINATES ETC.SIDE B: GLASS,...

Page 93 - WITH BALL BEARING/mit Kugellager

T.C.T. FACE-INLAY BITS WITH BALL BEARING GUIDEHM Nutfräser mit Anlauflager S ∅ 12 S ∅ 12,7 (1/2“) D B L E E305.064.R G305.064.R 22 6,4 76 4,8 E305.095.R G305.095.R 22 9,5 78 4,8 E305.127.R G305.127.R 22 12,7 82 4,8 E305.190.R G305.190.R 22 19 88 4,8 BALL BEARING/Kugellager WASHER/Scheibe SCREW/Schra...

Page 103 - CUSCINETTO

T.C.T. FLUSH TRIMMING BITSHM Doppelbündigfräser für “Elu” S M12x1 D B L F108.190.R 19 20 75 CUSCINETTO Z050.006.N L D B B ART. F108 S M12x1 D R B L F110.280.R 28 8 13 60 F110.320.R 32 10 15 60 F110.370.R 37 12 18 60 F110.420.R 42 15 21 60 F110.520.R 52 20 25 60 T.C.T. RADIUS BITSHM Viertelstabfräser...

Page 117 - DISPLAY UNITS; BASE; m o d u l a r p a n e l; STANDARD; PROFESSIONAL; m o d u l a r p a n e l s; It consist of two “basic model” display and can be composed

DISPLAY UNITS 126 Catalog 2001 BASE 1 m o d u l a r p a n e l STANDARD 2 m o d u l a r p a n e l s PROFESSIONAL 3 m o d u l a r p a n e l s Little display unit, suitable for those who mean to start with a suffi-cient choice for a small number of customers. L=110 cm • H=90 cm • P=30 cm It consist of ...

Page 122 - XL

QUICK CHANGE CHUCKSSchnellwechsel-Spannfutter RH ROTATION/Rechtsgang d D XL L050.100.N 10 18 17,5 SPARE SCREW/GewindestiftZ051.301.R 34 d D 14 ART. L050 TOOL HOLDER/Werkzeugaufnahme RH ROTATION/Rechtsgang LH ROTATION/Linksgang B L051.100.R L051.100.L 22,5 B 14 18 M10 ART. L051 ADAPTOR/Maschinenteile...

Page 126 - ROUNDED SPURS/mit Flachspitze

T.C.T. DOWEL DRILLSHM Dübelbohrer RH ROTATION/Rechtsgang LH ROTATION/Linksgang D B L S L109.050.R L109.050.L 5 52 85 10X30 L109.060.R L109.060.L 6 52 85 10X30 L109.070.R L109.070.L 7 52 85 10X30 L109.080.R L109.080.L 8 52 85 10X30 L109.100.R L109.100.L 10 52 85 10X30 L109.120.R L109.120.L 12 52 85 1...

Page 139 - NOTTMEYER

S B D T.C.T. DOWEL DRILLS WITH THREADED SHANKHM Dübelbohrer mit Gewindeschaft RH ROTATION/Rechtsgang LH ROTATION/Linksgang D B S N101.050.R N101.050.L 5 43 M8 N101.060.R N101.060.L 6 43 M8 N101.080.R N101.080.L 8 43 M8 N101.100.R N101.100.L 10 43 M8 N101.120.R N101.120.L 12 43 M8 N111.050.R N111.050...

Page 146 - Anuba

HSS STEP DRILLSHSS Stufenbohrer ART. R202 - 2 STEPS/2 Stufig - FLAT ON THE SHANK/Spannfläche am Schaft - FOR Masterwood MACHINES/für Masterwood Maschinen ∅ 10 d B L B 1 d 1 RH ROTATION/Rechtsgang d 1 d B B 1 L Anuba R202.090.R 3,8 5 20 40 75 9 R202.110.R 4,2 5,7 20 45 80 11 R202.130.R 5,2 6,5 15 50 ...

Page 147 - DRILLS SET/5 teilig Satz

HSS BRAD POINT DRILLSHSS Spiralbohrer ART. R205 D S L B RH ROTATION/Rechtsgang D B L S R205.030.R 3 33 60 3 R205.040.R 4 43 75 4 R205.050.R 5 52 85 5 R205.060.R 6 57 93 6 R205.070.R 7 69 109 7 R205.080.R 8 75 117 8 R205.090.R 9 81 125 9 R205.100.R 10 87 133 10 R205.111.R 11 94 150 10 R205.120.R 12 1...

Page 149 - Komplett mit 1 Messer 60÷80 + Schlüssel

ADJUSTABLE DIAMETER BORING BITS 30/60 MMBeschlagbohrer 30/60 mm verstellbar RH ROTATION/Rechtsgang D S L R110.600.R 30÷60 10x30 90 SPARE KNIFE/Ersatzmesser: R110.300.N 30÷45 R110.450.N 45÷60 ART. R110 - COMPLETE WITH 1 KNIFE 30÷45 + 1 KNIFE 45÷60 + KEY - Komplett mit 1 Messer 30÷45 +1 Messer 45÷60 +...

Page 150 - DRILLS SET

D S L T.C.T. HINGE BORING BITSHM Zylinderkopfbohrer RH ROTATION/Rechtsgang D L S R111.140.R 14 90 10x60 R111.141.R 14 120 10x100 R111.150.R 15 90 10x60 R111.151.R 15 120 10x100 R111.160.R 16 90 10x60 R111.161.R 16 120 10x100 R111.170.R 17 90 10x60 R111.180.R 18 90 10x60 R111.181.R 18 120 10x100 R111...

Page 153 - BORING BITS SET/5 Teilig Satz

ART. R213 S D L KSS CYLINDER BORING BITSKSS Forstnerbohrer RH ROTATION/Rechtsgang D L S R213.100.R 10 90 8x30 R213.120.R 12 90 8x30 R213.140.R 14 90 8x30 R213.150.R 15 90 8x30 R213.160.R 16 90 8x30 R213.180.R 18 90 8x30 R213.200.R 20 90 8x30 R213.220.R 22 90 8x30 R213.240.R 24 90 8x30 R213.250.R 25 ...

Page 159 - CENTERING DRILL/Zentrierbohrer

ART. S180 FOR LARGE BORING DEPTH, SUITABLE FOR WOOD, CHIP BOARD, PLASTIC MATERIAL, GLASS FIBER. BORE DEPTH 60 MM. SINGLE PACKED Für großen Bohrtiefen, Zum Bohren von Holz,Spannplatten, Kunststoff, Harzglas.Nutzlänge 60 mm.Einzelverpackt. HOLE SAWSLochsägen ITEM/Artikel D S Z RPM/n max S180.220.R 22 ...

Page 160 - Articolo

ART. S250 D 1 S D 2 HSS DOWEL CUTTERHSS Fräser zum Ausziehen RH ROTATION/Rechtsgang D 1 D 2 Z S S250.060.R 6 25 4 21/14x1" S250.062.R 6,2 25 4 21/14x1" S250.080.R 8 25 4 21/14x1" S250.082.R 8,2 25 4 21/14x1" S250.100.R 10 25 4 21/14x1" S250.102.R 10,2 25 4 21/14x1" S250.120.R...

Page 165 - FOR EXCENTRIC CHUCKS/Einsatz in excentrischen Spannfutter

RH ROTATION/Rechtsgang D B L S T101.030.R 3 5 34 9,5 T101.040.R 4 6 36 9,5 T101.050.R 5 7 39 9,5 T101.060.R 6 8 41 9,5 T101.070.R 7 10 43 9,5 T101.080.R 8 14 46 9,5 T101.090.R 9 18 48 9,5 T101.100.R 10 22 54 9,5 T101.121.R 12 28 60 12 T101.140.R 14 30 64 12 T101.160.R 16 34 70 12 T101.180.R 18 37 74...

Page 167 - For plexiglass

RH ROTATION/Rechtsgang D B L S T110.030.R £ 3 8 38 9,5x20 T110.040.R £ 4 10 39 9,5x20 T110.050.R £ 5 12 41 9,5x20 T110.060.R £ 6 16 43 9,5x20 T110.070.R £ 7 18 45 9,5x20 T110.080.R £ 8 20 48 9,5x20 T110.081.R £ 8 30 60 9,5x20 T110.090.R £ 9 22 52 9,5x20 T110.100.R £ 10 24 52 9,5x20 T110.101.R £ 10 3...

Page 169 - Außen

RH ROTATION/Rechtsgang D B Z T120.160.R 16 40 2 T120.180.R 18 40 2 T120.200.R 20 40 2 T120.220.R 22 40 2 T121.160.R 16 50 2 T121.180.R 18 50 2 T121.200.R 20 50 2 T121.220.R 22 50 2 T122.180.R 18 60 2 T122.200.R 20 60 2 T122.220.R 22 60 2 Euro 41,9044,1046,2048,90 44,1046,8048,9051,60 50,5052,7054,80...

Page 174 - Biesse

CONCENTRIC CHUCK ISO 30Spannzangenfutter mit Steilkegel ITEM A D SPRING COLLETS THREADED NUT KEY ROTATION Artikel Spannzangen Spannmutter Schlüssel Gang T118.800.R 50 50 ∅ 2÷20 (Art. T119) DIN 6499 (ER 32) (Art.Z091) Z052.401.N Dx T118.800.L 50 50 ∅ 2÷20 (Art. T119) DIN 6499 (ER 32) (Art.Z091) Z052....

Page 176 - CMS; Shoda

CONCENTRIC CHUCK ISO 40Spannzangenfutter mit Steilkegel ITEM A D SPRING COLLETS THREADED NUT KEY ROTATION Artikel Spannzangen Spannmutter Schlüssel Gang T118.850.R 63 50 ∅ 2÷20 (Art. T119) DIN 6499 (ER 32) Z052.401.N Dx T118.852.R 50 50 ∅ 2÷20 (Art. T119) DIN 6499 (ER 32) ball bearing nut/Kugellager...

Page 191 - LH ROTATION/Linksgang

RH ROTATION/Rechtsgang D B L T142.030.R 3 12 50 Z=2 T142.040.R 4 12 50 Z=2 T142.050.R 5 17 50 Z=2 T142.060.R 6 17 60 Z=2 T142.061.R 6 27 60 Z=2 T142.080.R 8 22 80 Z=2 T142.081.R 8 35 80 Z=2 T142.100.R 10 35 80 Z=2 T142.101.R 10 45 100 Z=2 T142.110.R 11 35 80 Z=2 T142.111.R 11 45 100 Z=2 T142.120.R 1...

Page 193 - CHIP-BREAKER EXECUTION/Ausführung mit Spanbrechernuten

RH ROTATION/Rechtsgang D B L T144.080.R 8 22 80 Z=3 T144.081.R 8 35 80 Z=3 T144.100.R 10 35 80 Z=3 T144.101.R 10 45 100 Z=3 T144.120.R 12 35 80 Z=3 T144.121.R 12 45 100 Z=3 T144.122.R 12 55 100 Z=3 T144.123.R 12 42 90 Z=3 T144.140.R 14 45 100 Z=3 T144.141.R 14 55 100 Z=3 T144.142.R 14 58 110 Z=3 T14...

Page 210 - TiCN; “ ” SURFACE TREATMENTS/Oberflächenbearbeitungen; K e n

ITEM/Artikel D B L S Z U240.050.R 5 35 102 8 1 U240.051.R 5 45 102 8 1 U240.052.R 5 55 102 8 1 U240.060.R 6 30 102 8 1 L B S D HSS SPECIAL BITS FOR PVCHSS Wasserschlitzfräser ART. U240 9-PCS SET FOR ALU9-teilig Satz für Alu ART. X015.009.R COMPLETE WITH/bestehend aus: U.201.030.R U.202.050.R U.201.0...

Page 211 - Sp

ART. YC 320 ITEM/Artikel D d YC320.160 32 M16 YC320.220 32 M22 YC320.270 32 M27 HOLDING SLEEVES FOR MILLING CUTTER GROUPS WITH MANUAL INSERTIONSpannbüchse d D ART. YC 320 ITEM/Artikel D d YC320.900 32 M30 HOLDING SLEEVES FOR MILLING CUTTER GROUPS WITH RAPID INSERTIONSchnellwechsel Spannbüchse d D AR...

Page 215 - DESCRIPTION/Beschreibung

SPECIAL UNITS FOR ALUMINIUM-PROFILESSondereinheit für Aluminium-Profilen ITEM/Artikel DESCRIPTION/Beschreibung ART. YG 000 FOR ALU-PROFILES/für Alu-Profilen “ALL. CO” ART. YG 001 FOR ALU-PROFILES/für Alu-Profilen “ALCAN” ART. YG 002 FOR ALU-PROFILES/für Alu-Profilen “EQUIPE” ART. YG 003 FOR ALU-PROF...

Page 220 - αα

S= ∅ 6 S= ∅ 8 D α B L W107.220.R W108.220.R 22 10° 12 55 W107.240.R W108.240.R 24 22° 12 55 W107.260.R W108.260.R 26 30° 12 55 W107.290.R W108.290.R 29 45° 12 55 αα BALL BEARING/Kugellager SPARE KNIFE/Ersatz-Wendeplatte SCREW/Schraube WRENCH/Hakenschlüssel 10° Z050.006.N Z055.001.N Z051.010.R Z052.2...

Page 223 - CYLINDRICAL SHANK ON REQUEST/Zyl. Schaft auf Anfrage

INSERTABLE BORING BIT Z=2+2Wendeplatten-Zylinderkopfbohrer RH ROTATION/Rechtsgang LH ROTATION/Linksgang D L S W140.250.R W140.250.L 25 57 10x26 W140.260.R W140.260.L 26 57 10x26 W140.300.R W140.300.L 30 57 10x26 W140.350.R W140.350.L 35 57 10x26 W140.400.R W140.400.L 40 57 10x26 SPARE KNIFE/Ersatz-W...

Page 233 - TOOL BODY + 3 INSERT PAIRS IN BOX/Trägkörper + 3 Messerpaaren in Box

INTERCHANGEABLE INSERT ROUTER BITS “NOVASYSTEM”Wendemesser Oberfräser “NOVASYSTEM” S ∅ 8 S ∅ 12 D α ° R W200.350.C W200.350.E 35 30° W200.A01 - SPARE INSERTS/Ersatzmesser PAIR/Paaren W200.380.C W200.380.E 38 45° W200.A02 - SPARE INSERTS/Ersatzmesser PAIR/Paaren W201.350.C W201.350.E 35 3,2 W201.A03 ...

Page 253 - MACHINE MODEL/Maschinen

KNIVES FOR PORTABLE PLANERSPräzisionsmesser für Handhobelmaschinen 262 Catalog 2001 ITEM/Artikel L H S MACHINE MODEL/Maschinen Z080.001.N 75 17 3 HM Bosch Z081.001.N 75 17 3 HS Bosch Z080.010.N 82 28 3 HM Hitachi Z081.010.N 82 28 3 HS Hitachi Z080.020.N 77 27 3 HM Elu Z081.020.N 77 27 3 HS Elu Z080....

Page 258 - Pmax

CORRUGATED BLANK KNIVESBlanketts nut Rückenverzahnung ART. ZC 50/60/70 - PRECISION SERRATION/Mit hochgenauer Verzahnung - ANGLE 60° PITCH 1,6 M/Flankenwinkel 60° Teilung 1,6 - HS: 18%W SUITABLE FOR SOFTWOOD DRY OR WET AND HARTWOOD WET HS: 18% geeignet für Weichhölzen trocken oder naß, und Harthölzen...

Page 261 - CUTTING MATERIAL/Schnittgut; GLUED TIMBER/Verleimtes Holz; D x

RECOMENDED CUTTING SPEEDRichtwerte für zweckmäßige Schnittgeschwindigkeit CUTTING MATERIAL/Schnittgut Vt (m/sec) SOFTWOOD/Weichhölzen 50 - 90 HARDWOOD/Harthölzen 50 - 80 GLUED TIMBER/Verleimtes Holz 35 - 60 CHIP BOARDS/Spanplatten 60 - 80 PLYWOOD BOARDS, VENEERED OR COATED ON BOTH SIDESSperrholzplat...

Page 275 - FL

PRECISION HM CIRCULAR SAWBLADESHM Präzisions Kreissägeblätter ART. FH - WITH HM STROBES FOR BETTER RESULT IN CUTTING ALONG GRAIN OFHARD WOOD AND RARE WOOD - WZ ALTERNATE TEETH - FOR MULTI BLADES SAWS - Mit HM-Räumer für höhere Schnittgüte bei Längsschnitte in Weich und Harthölzen - WZ Wechselzahn - ...

Page 287 - Emax; SPARE PARTS

ADJUSTABLE CUTTERHEAD WITH REVERSIBLE KNIVES FOR GROOVESWendeplatten-Verstellnuter ITEM/Artikel D d B Z V Emax TA140.07530 A+A 140 30 4÷7,5 4 4 32 TA140.07630 B 140 30 7,65 2 - 32 TA140.15030 A+B+A 140 30 4÷15 4+2 4 32 TA180.07530 A+A 180 30 4÷7,5 8 4 32 TA180.07535 A+A 180 35 4÷7,5 8 4 32 TA180.076...

Page 305 - Profilo

TX0010 SET IN PLASTIC BOX COMPLETE WITH CUTTERHEAD + 2 PROFILE KNIVES EACH Profile D + E + F Set in Kunststoffschachtel bestehend aus Tragkörper + je 2 Profilmesser von Profil D + E + F TX0011 SET IN PLASTIC BOX COMPLETE WITH CUTTERHEAD + 2 PROFILE KNIVES EACH Profile A + B + C Set in Kunststoffscha...

Page 313 - Bmax

∅ 50 ∅ 65 45 ° ∅ 123 20.2 ∅ 140 4 ÷ 7.5 ∅ 122 36.4 20.2 ∅ 105 B 4 1 2 3 ∅ 50 ∅ 65 45 ° ∅ 123 20.2 ∅ 140 4 ÷ 7.5 ∅ 122 36.4 20.2 ∅ 105 B 4 1 2 3 20 20 ∅ 138 5 45 ° 5 6 A 5 A 6 ∅ 50 ∅ 65 20 ∅ 138 30 ° 45 ° ∅ 123 20.2 ∅ 140 4 ÷ 7.5 ∅ 122 36.4 20.2 ∅ 105 B 4 A 4 4 1 2 3 8 5 8 8.5 3.6 ∅ 123 ∅ 106 18 8 9....

Page 314 - Descrizione

BALL BEARING WITH BUTTING RING SETAnlaufring-Set ITEM/Artikel Descrizione TX0050 GUIDE RING SET/Anlaufring Satz ∅ 70/90/100/125 Z050.500.N BALL BEARING/Kugellager ∅ 62x16 - ∅ 30 Z058.501.N GUIDE RING/Anlaufring ∅ 70 - ∅ 62 Z058.502.N GUIDE RING/Anlaufring ∅ 75 - ∅ 62 Z058.503.N GUIDE RING/Anlaufring...

Page 317 - TopCote; Table and tool surface sealant; The Best Products for Woodworking; TopCote; DriCote; Blade and bit cutting lubricant

TopCote ® • Eliminates “hang-ups” on sliding surfaces.• Protects all tools and equipment from rust.• Up to 30% slicker than paste wax.• Prevents rust 5 times longer than paste wax or silicone.• Easier and quicker to apply than paste wax.• Lasts 3 times longer than paste wax.• Contains no silicone or...

Page 318 - GRIND AND SPARE!So können Sie beim Schleifen sparen!

DIAMOND WHETSTONEDiamant Schleifstein A COMPLETE RANGE OF DIAMOND STONES FOR ANY KIND OF APPLICATIONEine komplette Serie von Artikeln zum Schleifen jedes beliebigen Schnittwerkzeugs JUST DIAMOND CAN GIVE YOU THE EDGE OF PERFECTIONNur Diamant Schleifsteine bieten optimale Qualität FAST - HARDEST MATE...

Page 320 - PRO

ITEM/Artikel GRIT SIZING/Körnung DESCRIPTION/Beschreibung DIMENSION/Abmessungen Euro FFF Fine/Fein POCKET DIAFOLD DIAMOND FLAT FILE 19/6,4 L=100 46,93 FFC Coarse/Grob Diamant Schleifstein mit umklappbarem, als Hülle dienendem Plastikgriff 19/6,4 L=100 46,93 PRO DISPLAY FREE OF CHARGE BY ORDERING 10 ...

Page 321 - Totale

ITEM/Artikel GRIT SIZING/Körnung DESCRIPTION/Beschreibung DIMENSION/Abmessungen Euro WTF Fine/Fein DIAMOND WHETSTONE BENCH MODEL IN HARDWOOD CASE 305x67x32 206,53 WTC Coarse/Grob Diamant Schleifstein für die Werkbank im Holzkiste 305x67x32 206,53 12” DIAMOND WHETSTONEWerkbank-Diamant Schleifstein AR...

Page 325 - Code; Merkmale

PRE SET P382 334 Catalog 2001 ➱ The programming requirements of point to point machines and NC routers make tool measurement display virtually indispensable and if this occurs outside the machine, then machine control data input operations are quicker. Wenn Sie Genauigkeit und einfache Werkzengverbe...

Page 327 - Meßbereich; Sonder Reduzierhülsen nach Anfrage

➱ Measuring range/ Meßbereich ➻ P399.400.05 - 400 mm diameter/ Durchmesser - 400 mm height/ Höhe ➻ Dimensionis/ Ausmaße 560 x 300 x 970 ➻ Weight/ Gewicht Kg 85 ➱ DISPLAY FUNCTIONS/ Merkmale: ➻ Resolution 0,005 mm (0,0002”)/ Auflösung 0,005 mm (0,00002”) ➻ Absolute and relative measuring/ Absolute un...

Page 328 - STURDY/widerstandsfähig; These in brief are the characteristics of; ANGOLFAST; IS MADE OF ANODIZED ALUMINIUM,; DIMENSION/Abmessungen

➱ PRECISE/genau ➱ STURDY/widerstandsfähig ➱ VERSATILE/vielseitig ➱ LIGHT/leicht ➱ HANDY/schnell ➱ SIMPLE/einfach ➱ These in brief are the characteristics of this instrument, useful for: ➻ INTERIOR DECORATORS ➻ KITCHEN UNIT MANUFACTURERS ➻ FRAME INSTALLERS ➻ BRICKLAYERS ➻ CARPENTERS I ➻ SMITHS ➻ SURV...

Page 329 - PRECISION; MODERN PANEL WORKING PRODUCTION TECHNOLOGIES; ALUMINIUM; AND; Aluminium; und Blechbearbeitung eingesetzt

C.LIN. 0500 C.LIN. 0750 C.LIN. 1000 C.LIN. 1500 C.LIN. 2000 C.LIN. 2500 C.LIN. 3200 ITEM/Artikel DIMENSION/Abmessungen L = 0÷500 L = 0÷750 L = 0÷1000 L = 0÷1500 L = 0÷2000 L = 0÷2500 L = 0÷3200 Euro 232,41 247,90 258,23 294,38 330,53 366,68 402,84 C.LIN. PA0500 C.LIN. PA0750 C.LIN. PA1000 C.LIN. PA1...

Page 331 - FOR INSIDE; STEEL PLATES/Stahlplättchen

GAUGE FOR INSIDE/OUTSIDE MEASURINGLehre für Innen-Außenmaße 340 Catalog 2001 ➱ SUITABLE FOR MEASURING BIG DIMENSIONS OPENINGS (min. 50 mm) ON WOOD PANELS AND FRAMES . FOR INSIDE MEASURINGS MM 50 IS TO BE ADDED.Eignet sich für die Messung von großen Bohrlöchern (Mindestdurchmesser: 50mm) und/oder Öff...

Page 332 - VALUE READ ON THE SCALE. TWO TAPERED PINS ARE SUPPLIED AS STANDARD; STOP PIN/Auschlagstift

GAUGE FOR LINEAR MEASUREMENTS AND DISTANCE BETWEEN CENTRESLehre für lineare Maße und Bohrlochabstände 341 Catalog 2001 ➱ THE LENGTH IS READ DIRECTLY ON THE GRADUATED SCALE, THE HOLE DISTANCE IS OBTAINED BY ADDING 20 MM TO THE VALUE READ ON THE SCALE. TWO TAPERED PINS ARE SUPPLIED AS STANDARD ∅ 4 / ∅...

Page 334 - USED TO IMPROVE THE EVALUATION OF THE SCALE IN CASE OF

GAUGE FOR 45° CUTSLehre für 45°-Verbindungen 343 Catalog 2001 ➱ SUITABLE FOR THE PRODUCTION OF FRAMES, SASHES AND OTHER COMPONENTS WITH 45° ANGLES. MINIMUM MEASURABLE LENGTH - 80MM.Eignet sich für die Anfertigung von Fensterzargen, Rahmen, Türen und allen sonstigen Produkten, an deren Enden Schnitte...

Page 335 - GAUGE FOR LINEAR MEASURING/ Schieblehre für Lineare Abmessungen

NEW GAUGES/ Neue Schieblehre “Digit+” 344 Catalog 2001 ➱ THE DIGIT+ GAUGE IS AN EVOLUTION OF THE PREVIOUS SERIES. A SIMPLE, PRACTICAL, LIGHT-WEIGHT GAUGE BUT AT THE SAME TIME RIGID AND ACCURATE. THE ALUMINIUM BAR SECTION HAS BEEN DESI-GNED IN SUCH A WAY THAT THE SLIDING GUIDES AND THE MAGNETIC STRIP...

Page 336 - MAIN FEATURES/Wesentliche Merkmale; EASY TO USE/einfach im Gebrauch; OPTIONALS ON REQUEST; SERIAL PORT/serieller Ausgang

345 Catalog 2001 ➱ MAIN FEATURES/Wesentliche Merkmale ➻ EASY TO USE/einfach im Gebrauch ➻ LIGHT-WEIGHT/leicht ➻ ACCURATE/ präzise ➻ BATTERY-POWERED (1.5V AA TYPE BATTERY) batteriebetrieben (1 Batterie 1,5 V Typ AA) ➻ FUNCTIONS/Funktionen: - ABSOLUTE/INCREMENTAL/absolut/relativ- MEASUREMENT TYPES SEL...

Page 337 - Main characteristics/Wesentliche Merkmale; ITEM

MAGNETIC STRIP MEASURING SYSTEM/Messungssystem auf Magnetstreifen 346 Catalog 2001 Application on panel sizing machines for squaring cutsAnwendung auf Kreissägemaschinen Winkelschnitt A FAST AND ACCURATE SYSTEM WHICH ALLOWS READING OF MEASUREMENTS DIRECTLY ON THE M10 DISPLAY. IT IS EXTREMELY EASY TO...

Page 338 - THANKS TO THIS WORK STATION YOU CAN CHECK

ELECTRONIC WORK STATIONElektronischer Messtisch 347 Catalog 2001 ➱ BCE 25 FOR 2.500 MM X 1.000 MM PANELS/BCE 25 für Platten 2.500 mm x 1.000 mm THICKNESS/Plattenstärke 50 mmPRECISION/Genauigkeit 0,1mm ➱ Z-AXIS/Z-Achse ➱ FOR MODERN PANEL PRODUCTION FOR THE FURNITURE INDUSTRY, ADEQUATE QUALITY CONTROL...

Page 339 - EXECUTION WITH 6-POSITION REVOLVER, TO SPEED UP; To

348 Catalog 2001 ➱ EXECUTION WITH 6-POSITION REVOLVER, TO SPEED UP FEELER PIN CHANGE AND VACUUM SYSTEM TO HOLD THEPANELS DOWN (USEFUL FOR SMALL-SIZE PANELS). Lösungen mittels Revolver mit 6 Adapter Revolver, der das schnellePositionieren des Zapfens und der Saugköpfe für das Befestigen derPlatte erm...

Page 352 - GENERAL SALE CONDITIONS/Allgemeine Verkaufsbedingungen

GENERAL SALE CONDITIONS/Allgemeine Verkaufsbedingungen UNLESS OTHERWISE AGREED IN WRITINGSofern nicht anderslautende schriftlich bestätigte Vereinbarungen getroffen werden 361 Catalog 2001 ORDERSBestellugen PRICESPreise PACKAGINGVerpackung FORWARDINGSpedition DELIVERYLieferung GUARANTEEGarantie CLAI...

Page 354 - THE RIGHT SOLUTION FOR TAILOR DESIGNING

ARKADE+ZINKEL+ELLIX - THE COMPLETE ROUTING SYSTEM FOR ARCHESein Gerat für alle Bogen 350 Catalog 2001 ➱ “ARKADE” EQUIPMENT CAN PRODUCE ROUND AND/OR FLAT ARCHES WITH MINIMUM DIAMETER 27 CM AND MAXIMUM DIAMETER 6M. IF THE“ARKADE” IS COMPLEMENTED BY “ZINKEL” EQUIPMENT, IT IS ALSO POSSIBLE TO MAKE DOUBL...

Page 355 - Komplett mit Vorzeichen Einheit und Goniometer.; ELLIX; ELLISISTEM; Sonder Gerät für Stichbogen und Korbbogen.

351 Catalog 2001 “ELLIX” “ARKADE” “ARKADE” + “ZINKEL” “ARKADE” + “ZINKEL” “ARKADE” “ARKADE” ➱ “ ELLISISTEM ” is the “last born” of our special equipments for producing arch frames. With “ ELLISISTEM ” the customer can execute a perfect geometrical ellipse. Suitable for house restoration where the do...

Page 356 - WORK PROCEDURE/Arbeitslauf

SASHFlügel BALLBEARINGKugellager WORK PROCEDURE/Arbeitslauf 352 Catalog 2001 ➱ DRAWING OF ARCH. Vorzeichung von Rundbogen. ➱ DRAWING AND CUTTING OF ARCH COMPONENT PARTS.Vorzeichung und Schneiden von deneinzelnen Stücken. ➱ JOINING THE ARCH COMPONENT PARTS (USE ECCENTRIC CLAMP ART. SPP060029 ) . Verl...

Page 357 - Solid CARBIDE bit for glass fixing lath

“ARKADE + ZINKEL + ELLIX ” THE ONLY EQUIPMENT ON THE MARKET CAPABLE OF PRODUCING SINGLE-DOUBLE RADIUS ARCH OR ELLIPTICAL FRAMESDie beste Lösung für alle Bogen. TOOLS TO BE USED WITH THESE EQUIPMENTS/Werkzeuge für Arkade+Zinkel+Ellix Geräte 353 Catalog 2001 DRAWING/Zeichnung SHANK/Schaft ∅ 12 E.199.1...

Page 358 - ARCOM

FITTINGS AND SPARE PARTS FOR “ARKADE+ZINKEL+ELLIX”Zubehöre und Ersatzteile für die Ausrüstungen “Arkade+Zinkel+Ellix” 354 Catalog 2001 ➱ THE ECCENTRIC CLAMP IS SUITABLE FOR KEEPING THE GLUED WOOD SECTIONS WITHCOMB JOINTS UNDER PRESSURE. IT IS TIGHTENED AND SLACKENED BY TURNING THEGRIP; THE ECCENTRIC...

Page 359 - THE LIFTING CLAMP FACILITATES THE HANDLING AND; THICKNESS RANGE/Spannbereich

➱ THE DRIVER FOR CURVES WAS CONCEIVED FOR GREATER SAFETY DURING ROUTER MACHINING ON CURVES. IT IS EQUIPPED WITH A MOTOR SUFFICIENT TOGUARANTEE A REGULAR FEED OF ABOUT 2 M/MIN. SO THAT A GOOD QUALITY OFFINISH IS OBTAINED. THE RUBBER WHEEL, APART FROM NOT DAMAGING THEWOOD, GUARANTEES THE PERFECT POSIT...

Page 360 - Exetensions; SUITABLE FOR T-JOINTS IN LITTLE PIECES

356 Catalog 2001 T-JOINTS CLAMPT-Verbindungen Klemme SPP060075 ITEM/Artikel THICKNESS RANGE/Spannbereich Min. 10 mm - Max 65 mm Euro 64,04 CARPENTER’S CLAMPZwinge Exetensions SPP020021 ITEM/Artikel THICKNESS RANGE/Spannbereich Min. 250 mm - Max 800 mm Euro 72,30 SPP020022 ITEM/Artikel THICKNESS RANG...

Page 361 - A CALCULATOR RULE FOR AUTOMATICALLY TAKING WINDOW MEASUREMENTS; This instrument has been designed and made for window; REGOLO

➱ The TRIMATIC unit with five tool holders is suitable to make a five holes set with distance between centres of 32 mm. in a single pass. This device is designed for drilling holes in lateral panels (sides) of furniture for both fixing the hinge and positioning the shelves at the height desired. In ...

Page 362 - TRIMATIC FOR HINGES/Trimatic-für Scharniere

358 Catalog 2001 TRIMATIC FOR HINGES/Trimatic-für Scharniere THE BEST CHOICE FOR ANY HINGE/Die richtige Wahl für jedes Scharnier 48 6 ∅ 35 TRIMATIC 48/6 HINGES TYPE “SALICE”/Scharnier Typ “Salice” HINGES TYPE “MEPLA”/Scharnier Typ “Mepla” MINI-HINGES/Mini-Scharnier HINGES FOR LARGE THICKNESS PANELS/...

Page 363 - CLAMPING STRENGTH/Spannstärke; DOOR LIFTER/Tür und Plattenheber

LIFTER 100 ITEM/Artikel CLAMPING STRENGTH/Spannstärke Kg. 100 DOOR LIFTER/Tür und Plattenheber LIFTER 100: LIFTS, SWIVELS AND LOWERSEASY FOOT OPERATIONFOR WEIGHTS UP TO 100 KGFOR THE INSTALLATION OF DOORS INCLUDING FIRE DOORS, WINDOWS, FURNITURE, DRY WALLS, PARTITIONS. LIFTER 100: zum Heben und Schw...

Page 364 - QUICK CLAMPING DEVICES/Schnellspannvorrichtungen; DEVICES FOR QUICK CLAMPING WORKPIECES AND FOR NUMEROUS; PUSHER TYPE

QUICK CLAMPING DEVICES/Schnellspannvorrichtungen 360 Catalog 2001 ➱ DEVICES FOR QUICK CLAMPING WORKPIECES AND FOR NUMEROUS APPLICATIONS. BY SIMPLY APPLYING PRESSURE ON THE GRIP, ONCE DEAD CENTRE HAS BEEN PASSED, THEY CLOSE SECURELY. HORIZONTAL MODELS WITHHORIZONTAL OR VERTICAL CLAMPING, PUSH ROD AND...