Ryobi 130rEB- Manuals

RULES FOR SAFE OPERATION 5 • Stop and unplug the unit for maintenance, repair, or for changing the cutting attachment or other attachments. • Use only genuine Ryobi replacement parts and accessories for this unit. These are available from your authorized service dealer. Use of any non Ryobiparts or ...

RULES FOR SAFE OPERATION 7 KNOW YOUR UNIT APPLICATIONS As a trimmer; • Cutting grass and light weeds. • Decorative trimming around trees, fences, etc. With Edger Add-On; • Edging along paths, driveways, rockeries, etc. With Sweeper/Blower Add-On • Cleaning driveways, porches, around walls, fences, e...

ASSEMBLY INSTRUCTIONS 8 Fig. 3 Fig. 4 INSTALLING CUTTING ATTACHMENT SHIELD WARNING: To avoid injury, never operate the trimmer without the cutting attachment shieldinstalled. If the trimmer is operated without itin place, you will VOID the warranty. 1. Place the cutting attachment shield onto the sh...

OPERATING INSTRUCTIONS 9 Fig. 5 Fig. 6 CONNECTING THE POWER CORD WARNING: To reduce the risk of electrical shock, this unit has a polarized plug (oneblade is wider than the other) and will requirethe use of a polarized extension cord. Thisunit plug will fit into a polarized extensioncord only one wa...

OPERATING INSTRUCTIONS 10 2. While firmly holding the add-on, push it straight into the Click-Link® coupler (Fig. 8). NOTE: Aligning the release button with the guide recesswill help installation (Fig. 8). 3. Turn the knob clockwise to tighten (Fig. 9). CAUTION: Lock the release button in the primar...

OPERATING INSTRUCTIONS 11 Fig. 10 Fig. 11 Each time the head is bumped, about 1 inch (25.4 mm.)of trimming line is released. A blade in the cuttingattachment shield will cut the line to the proper length if excess line is released. For best results, tap the Bump Head on bare ground orhard soil. If l...

OPERATING INSTRUCTIONS 12 DECORATIVE TRIMMING Decorative trimming is accomplished by removing allvegetation around trees, posts, fences, etc. Rotate the whole unit so that the cutting attachment is ata 30° angle to the ground (Fig. 12). HOLDING THE UNIT WITH EDGER ADD-ON WARNING: Always wear eye, he...

OPERATING INSTRUCTIONS 13 OPERATING TIPS WHEN USINGSWEEPER/BLOWER • To reduce the risk of hearing loss associated with sound level(s), the use of hearing protection isrequired. • Operate power equipment only at reasonable hours – not early in the morning or late at night when peoplemight be disturbe...

MAINTENANCE AND REPAIR INSTRUCTIONS 14 Fig. 21 5. Check the indexing teeth on the inner reel and outer spool for wear (Fig. 21). If necessary, remove burrsor replace the reel and spool. Indexing Teeth 6. Take approximately 25 feet (7.6 m) of new 0.080 inch diameter trimming line, loop it into two eq...

MAINTENANCE AND REPAIR INSTRUCTIONS 15 Fig. 23 Fig. 24 Fig. 22 Fig. 25 9. Place the spring in the inner reel. Insert the ends of the line through the eyelets in the outer spool andplace inner reel inside the outer spool (Fig. 25). Pushthe inner reel and outer spool together. While holdingthe inner r...

MAINTENANCE AND REPAIR INSTRUCTIONS 16 EDGER BLADE REPLACEMENT WARNING: To avoid serious personal injury, always wear gloves while handling, removingor installing the blade. WARNING: The gear housing gets hot after long periods of use. To avoid seriouspersonal injury, do not touch the housinguntil i...

CLEANING AND STORAGE 17 INSPECT EXTENSION CORDS Inspect all extension cords periodically. Look closely fordeterioration, cuts or cracks in the insulation. Inspect theconnectors for damage. Replace cords if defective ordamaged. STORAGE • Store the unit indoors, away from moisture and harmful substanc...

SPECIFICATIONS 18 Motor Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.C. 110 Volt ElectricOperating RPM (both lines fully extended) Low Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO (2) YEAR WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTSUSED FOR ANY COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIESINCLUDING MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN THEIR ENTIRETY AFTER...

RULES FOR SAFE OPERATION 5 • Stop and unplug the unit for maintenance, repair, or for changing the cutting attachment or other attachments. • Use only genuine Ryobi replacement parts and accessories for this unit. These are available from your authorized service dealer. Use of any non Ryobiparts or ...

RULES FOR SAFE OPERATION 7 KNOW YOUR UNIT APPLICATIONS As a trimmer; • Cutting grass and light weeds. • Decorative trimming around trees, fences, etc. With Edger Add-On; • Edging along paths, driveways, rockeries, etc. With Sweeper/Blower Add-On • Cleaning driveways, porches, around walls, fences, e...

ASSEMBLY INSTRUCTIONS 8 Fig. 3 Fig. 4 INSTALLING CUTTING ATTACHMENT SHIELD WARNING: To avoid injury, never operate the trimmer without the cutting attachment shieldinstalled. If the trimmer is operated without itin place, you will VOID the warranty. 1. Place the cutting attachment shield onto the sh...

OPERATING INSTRUCTIONS 9 Fig. 5 Fig. 6 CONNECTING THE POWER CORD WARNING: To reduce the risk of electrical shock, this unit has a polarized plug (oneblade is wider than the other) and will requirethe use of a polarized extension cord. Thisunit plug will fit into a polarized extensioncord only one wa...

OPERATING INSTRUCTIONS 10 2. While firmly holding the add-on, push it straight into the Click-Link® coupler (Fig. 8). NOTE: Aligning the release button with the guide recesswill help installation (Fig. 8). 3. Turn the knob clockwise to tighten (Fig. 9). CAUTION: Lock the release button in the primar...

OPERATING INSTRUCTIONS 11 Fig. 10 Fig. 11 Each time the head is bumped, about 1 inch (25.4 mm.)of trimming line is released. A blade in the cuttingattachment shield will cut the line to the proper length if excess line is released. For best results, tap the Bump Head on bare ground orhard soil. If l...

OPERATING INSTRUCTIONS 12 DECORATIVE TRIMMING Decorative trimming is accomplished by removing allvegetation around trees, posts, fences, etc. Rotate the whole unit so that the cutting attachment is ata 30° angle to the ground (Fig. 12). HOLDING THE UNIT WITH EDGER ADD-ON WARNING: Always wear eye, he...

OPERATING INSTRUCTIONS 13 OPERATING TIPS WHEN USINGSWEEPER/BLOWER • To reduce the risk of hearing loss associated with sound level(s), the use of hearing protection isrequired. • Operate power equipment only at reasonable hours – not early in the morning or late at night when peoplemight be disturbe...

MAINTENANCE AND REPAIR INSTRUCTIONS 14 Fig. 21 5. Check the indexing teeth on the inner reel and outer spool for wear (Fig. 21). If necessary, remove burrsor replace the reel and spool. Indexing Teeth 6. Take approximately 25 feet (7.6 m) of new 0.080 inch diameter trimming line, loop it into two eq...

MAINTENANCE AND REPAIR INSTRUCTIONS 15 Fig. 23 Fig. 24 Fig. 22 Fig. 25 9. Place the spring in the inner reel. Insert the ends of the line through the eyelets in the outer spool andplace inner reel inside the outer spool (Fig. 25). Pushthe inner reel and outer spool together. While holdingthe inner r...

MAINTENANCE AND REPAIR INSTRUCTIONS 16 EDGER BLADE REPLACEMENT WARNING: To avoid serious personal injury, always wear gloves while handling, removingor installing the blade. WARNING: The gear housing gets hot after long periods of use. To avoid seriouspersonal injury, do not touch the housinguntil i...

CLEANING AND STORAGE 17 INSPECT EXTENSION CORDS Inspect all extension cords periodically. Look closely fordeterioration, cuts or cracks in the insulation. Inspect theconnectors for damage. Replace cords if defective ordamaged. STORAGE • Store the unit indoors, away from moisture and harmful substanc...

SPECIFICATIONS 18 Motor Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.C. 110 Volt ElectricOperating RPM (both lines fully extended) Low Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO (2) YEAR WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTSUSED FOR ANY COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIESINCLUDING MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN THEIR ENTIRETY AFTER...