Russound ISK4 - Manuals - manualsarea.com

Page 2 - Important Safety Instructions

2 Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SER-VICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important o...

Page 4 - Front View

4 Front View 1 2 3 4 1 2 3 4 CAMERA – Provides a constant video signal for a monitor or CCTV system MICROPHONE AND SPEAKER – Provide two-way communication with interior keypads CALL BUTTON – Rings doorbell and initiates communication COVER PLATE – Protects circuits and components from the weather

Page 5 - Rear View; POTENTIOMETER – Sets speaker volume

5 Rear View BR BR/W G G/W O O/W BL BL/W 5 1 2 3 4 1 2 3 4 110 PUNCH-DOWN BLOCK – For CAT-5 intercom cable connection POTENTIOMETER – Sets speaker volume CAMERA – Angle adjusts to accommodate placement to the left or right of door MULTIPIN CONNECTOR – Accepts camera power and video adapter cable (inc...

Page 8 - Camera Connection Using CAT-5; To connect the camera video and power using a single CAT-5 cable:; the camera video lead of the adapter cable.

8 Camera Connection Using CAT-5 To connect the camera video and power using a single CAT-5 cable: 1. At each end of the cable, separate the brown and brown/white wires from the other pairs. Leave enough length on the brown pair for splicing. 2. Crimp RJ-45 connectors on the remaining pairs as shown ...

Page 9 - Camera connection using CAT-5 cable for video and power; The ISK4 camera requires a regulated 12 VDC power supply.

9 Adapter cable (included) BR BR/W G G/W O O/W BL BL/W To video display 846C power supply CAT-5 cable Butt splice Butt splice BNC-RCA adapter Video lead Power leads ISK4 MOD-VB Camera connection using CAT-5 cable for video and power Note: The ISK4 camera requires a regulated 12 VDC power supply. Use...

Page 10 - Camera Connection Using RG-59 and 2-Conductor Cables; at the door station, observing the following polarity:; camera video lead of the adapter cable.

10 Camera Connection Using RG-59 and 2-Conductor Cables To connect the camera using RG-59 cable for video and 2-conductor cable for power: 1. Butt splice the camera power leads on the included adapter cable to the 2-conductor cable at the door station, observing the following polarity: Polarity Came...

Page 12 - Camera Adjustment

12 Camera Adjustment Note: We recommend connecting the adapter cable to the camera before adjusting it. The ISK4 camera is mounted in a yoke that allows both pan and tilt adjustments so you can point the camera toward visitors at the door. To adjust the camera angle: 1. With a #1 or #2 Phillips scre...

Page 14 - speak without pressing the Call button.; Speaker Volume Adjustment

14 Powering Up After making all connections and installing the ISK4 in the wall box, plug the camera power supply into an AC receptacle and power up the ComPoint system. Also power up the video display being used to receive the camera signal. Check the camera angle to make sure a person standing at ...

Page 15 - Technical Specifi cations; Warranty

15 Technical Specifi cations User control: Call button with amber backlight Audio input: Built-in microphone with automatic gain control Amplifi er: Monaural (for system functions only) Amplifi er power: 2 watts Volume control: Installer-adjustable potentiometer Audio output: Built-in speaker Video ...

Page 16 - Instruction Manual

ISK4 ComPoint ® Camera Door Station Instruction Manual Russound5 Forbes Road, Newmarket NH 03857 USATel 603.659.5170 • Fax 603.659.5388www.russound.comTechnical Support: [email protected] 28-1301 1/15/08 Copyright © 2008 Russound. All rights reserved. All trademarks are the property of their respect...