Russound CAM6.6T-S1 - Manuals

5 USER SECTION Component Guides Explains front panel features of the CAM6.6 controller, UNO-S1 keypad, optional UNO-S2 keypad and UNO-LRC1 remote control. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available through the User Menu. IN PU T MU T...

6 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAM6.6T-S1 System to enhance your home with distributed audio. This system’s state-of-the-art features and components blend seamlessly with your uniquelifestyle and preferences. Besides distributing and controlling six audio sources to six...

7 USER COMPONENT GUIDE CAM6.6 Controller-Front Panel MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) 1 2 2 1 Main Power and Zone Status The power switch for the CAM6.6 controller is “on” in the up position. Any activeroom...

8 USER COMPONENT GUIDE UNO-S1 Keypad LCD PANEL - 5-character backlit display shows status of the room, source,volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to theCAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BU...

9 CD PLAYER 1 LCD PANEL - 12-character backlit display shows status of the room, source,volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to theCAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BUTTONS - Raises and low...

10 USER COMPONENT GUIDE UNO-LRC1 Remote Control LOCAL DEVICE BUTTONS - Select localsource to be controlled by UNO-LRC1. SETUP - Use for programming UNO-LRC1 usingthe built-in library or by learning-in codes. UNO SOURCE BUTTON - Selects UNOKeypad for control by UNO-LRC1. ROOM ON/OFF - Turns room on a...

11 Zone On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. Press and release to turn off the UNO System Keypad. Thi...

12 USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust theaudio properties and control functions of a par-ticular room. To enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make changes whileusing t...

13 USER OPERATION Optional UNO-S2 Keypad Zone On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. Press and release ...

14 The User Menu allows the user to adjust theaudio properties and control functions of a par-ticular room. The following keys are used to navigate andmake changes while using the User Menu: To enter the User Menu, press and hold during normal operation. To exit the User Menu, press and release . Ad...

15 USER INTERNAL SOURCE - AM/FM TUNER UNO-S1 Keypad Control UNO-S1 Keypad Control of Tuner Selecting the tuner On the UNO-S1 keypad, press to select the AM/FM tuner by choosing the tuner’s preas- signed source number (1). Selecting the desired frequency Press and hold or to activate manual tuning. O...

16 USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Control UNO-S2 Keypad Control of Tuner Selecting the tuner On the UNO-S2 keypad, press to select the AM/FM tuner by choosing the tuner’s preas- signed source number (1). Selecting the desired band Push to toggle between AM band and FM band receptio...

17 92.5 MHz FM TUNER SELECTION - Select source number assigned to AM/FM TUNER (1) TUNE UP/DOWN - Used for manual station selection SELECT - Selects AM or FM band SEEK - (press) Seeks next higher tuned station SCAN - (press and hold) Scans through tuned sta-tions with 5-second preview before next sta...

19 USER INTERNAL SOURCE - AM/FM TUNER UNO-LRC1 Remote Control POWER - Power managed by CAM6.6 NUMERIC INPUT - (press) Number buttons fordirect input of frequency, preset, bank MEMORY PRESETS - (press and hold) Numberbuttons (1-6) for saving memory presets TUNE UP/DOWN - Incrementally scrolls through...

20 Do not connect the controller's main power feed until all other connections have beenmade and verified. Live connection or removal of the keypad wiring or other wiringwhen the system is powered can cause communication problems in the network.Double-check terminations during each phase of the inst...

21 INSTALLER SECTION Getting Started Includes an installation overview, including tools needed and wiring instructions. Component Guides Reviews front and back panel features of the CAM6.6 controller and the UNO-S1 keypad. Keypad Installation Explains UNO-S1 keypad installation and wiring. Making Co...

22 INSTALLER GETTING STARTED Unpacking the System Components • Keep the original carton and packing materialsfor future shipment or storage. • Check for any visible signs of damage. Ifyou encounter any concealed damage, con-sult your Russound dealer before proceedingto install the unit. • Retain the...

23 INSTALLER WIRING INSTRUCTIONS RJ-45 Connections The CAT-5 T568A wiring standard shown onthe right is used for the RJ-45 terminations. Keypad Wiring For the UNO-S1 keypad, the following connec-tions are used to terminate the CAT-5 wire to the110 punchdown on the keypad: CAT-5 WIRE COLOR TYPE Brown...

25 OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, AM/FMradio module AC 240V-AC 110V Switch - Switches A/C input voltage between 110VAC and240VAC AC 120/240 INPUT - Grounded 3-terminal plug detachable power cord connectionfor the CAM6.6 FUSE HOLDER - Holds a replaceable fuse f...

26 INSTALLER COMPONENT GUIDE UNO-S1 Keypad-Update Port Src 3 Data Rx TTL Level Data Tx TTL Level GND +12VDC Note: Do not put RS-232-level signalsinto the pins. Must useAdvancedProgramming CableP/N 2500-521065. OS Update/Run Jumper -The pins are jumpered when performing an OS update on the key-pad, a...

27 110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between theUNO-S1 Keypad and the CAM6.6 controller. 1 INSTALLER COMPONENT GUIDE UNO-S1 Keypad-CAT-5 Connection 1 N EWMARKET , NH U.S.A. DESIGNED IN USA MADE IN K OREA BR GR OR +12V BR/W +12V GND GR/W GND OR/W COM A BL/W COM B BL IR OUT UN...

28 INSTALLER UNO-S1 KEYPAD-INSTALLATION Keypad Location The best infrared remote performance is achievedwith the keypad away from any direct sunlight,plasma TV, and low voltage lighting controls. Alsoconsider convenience when choosing a location. Choose a place that is easily seen from the posi-tion...

29 CAM6.6 CAT-5 Cable CAT-5 Cable PM Mod 3Dwith RJ-45 CAT-5 Cable SA-ZX3 1201A/1APower Supply CAM6.6X The UNO System Keypad Ports are located onthe back of the CAM6.6 in the top left of center.Connections made at the UNO Keypad Ports aremade using CAT-5 T568A RJ-45 wire configura-tion. CAT-5 is colo...

30 Source Audio Connections The CAM6.6 supports up to six audio sources.The Source Inputs are located at the back panel.The Source 1 input serves a dual purpose. If theCAM6.6 optional internal source is used, theSource 1 input is not available, and the switchnext to it is set to “Internal Source Out...

31 INSTALLER MAKING CONNECTIONS Common IR Connection Common IR Connections The Common IR jack on the rear of the CAM6.6allows control of any source equipment withoutthat source being selected on the keypad. Theconnection for the COM IR jack is made using an IR emitter with a 1/8’’ plug. The Russound...

34 CAM6.6 12VDC Home Theater Trigger In This 12VDC Trigger input is used to controlPower Management of the audio sources possiblybeing shared with a home theater system. Whenthe last zone on the CAM6.6 is turned off, 12VDCpresence to the trigger input will prevent thesources that are on from being t...

35 12VDC Mute Trigger In When 12VDC is applied to the Mute Trigger In,the system will fully mute any source that is con-nected to the Source Audio Input. The connec-tions for the trigger are made using a two-con-ductor cable with 1/8” male mini-plug jacks. Thetip is positive (+) and sleeve is negati...

38 INSTALLER MAKING CONNECTIONS Optional Internal Source - AM/FM Tuner Antennas AM Antenna Connect the included loop antenna for AM recep-tion to the Optional Internal Source panel, attach-ing the GND (ground) and AM ends to the appro-priately marked connections. FM Antenna Attach the included FM an...

40 Grounding an Outdoor Antenna If the tuner is used with an outdoor antenna, theantenna must be grounded against staticcharges and voltage surges. Consult the instruc-tions that came with the antenna or contact theantenna manufacturer for proper installationinstructions. The diagram above gives a g...

41 Before proceeding to the system programming section, it’s important to conduct an initial test todetermine that the hardware components are working properly. 1. Connect the speaker wires from Zone #3 to the CAM6.6 Zone #3 speaker output connectors. 2. Connect an UNO-S1 keypad to Keypad Port #3 on...

42 This manual includes items that are designed to assist in the programming process. Forms (Pages 44-46) Three blank reproducible forms are included as planning tools when determining sources, settingsand zone preferences. The Source and Zone Information forms and the Macro Editor form should becom...

44 Tuner Russound N/A P e ripher al N/A N N/A N N/A N/A INSTALLER SETUP FORMS

47 There are three item types in the installation menu: Menu Item – Acts as a folder that holds procedures and/or feature parameters. Procedure – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key. Once you begin a procedure, the system will prompt for the...

The following items make up the Installation Menu: PERIPH SETUP ( P e r Su) SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) PERIPH SETUP (PerSu) Peripheral Setup allows the CAM6.6’s optional internal source to be...

INSTALLER INSTALLATION MENU 2. BANK NAME – Use the volume up/down keys to select a character and left/right (BnkNm) keys to change a character position. A blinking cursor indicates placement of the character being entered. Names can be from 1 to 5 characters in length. If adding names from 6-12 char...

50 INSTALLER INSTALLATION MENU SYSTEM INFO (SInfo) System Info shows the tuner’s manufacturing build properties. See Periph Setup - Flow Chart on page 64 BUILD TIME (BTime) BUILD DATE (BDate) VERSION (Ver) 1. BUILD TIME Displays the firmware Build Time of the tuner. (BTime) 2. BUILD DATE Displays th...

INSTALLER INSTALLATION MENU i. MACRO - Macro loads a series of commands which are processed when (Macro) activated. ii. MACRO ID – Enter the macro ID number. Menu advances to SAVE CHANGES (MacID) (step 9) e. All Other Selections: Procedure advances to DEVICE CODE (step 7) 7. DEVICE CODE – Enter sour...

55 INSTALLER INSTALLATION MENU 9. SUFFIX CMD – Tells the system whether a command will be issued after the (Sufix) selection of the numerical value (e.g., 1, 2 Enter). If “no,” proce- dure advances to SAVE CHANGES (step 13) 10. COMMAND TYPE – Select the type of source command (e.g., CD, TV, etc.). (...

INSTALLER INSTALLATION MENU 2. COMMAND TYPE – Select the type of source command (e.g., CD, TV, etc.). (CmdTp) a. Selected: Learned IR Choose Learned IR if the pre-programmed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned source bank to be assigned ...

57 INSTALLER INSTALLATION MENU Zone Setup allows the installer to adjust properties of the UNO Keypad controlled CAM6.6 zone. Thisseries of menus allows the system’s zones to be configured for these properties: ZON VOL TRIM (ZonVT) SYSON ENABLE (SysOn) PARTY ENABLE (PtyEn) MASTER ENABL (MstEn) MUTE ...

58 INSTALLER INSTALLATION MENU All settings including source equipment IR commands will need tobe reentered. An “Are you sure?” prompt and a “no” response allows the installer to cancel the reset; a “yes” at the prompt will load factory/default settings. POWER MANAGEMENT (PwMgt) The CAM6.6 is capabl...

60 9. KEY FUNCTION (f) – Select Keypad function. (KeyFn) 10. SAVE CHANGES? (f) – Select “yes” to save the changes. (Save?) LEARN IR (LrnIR) This procedure allows IR commands to be learned into the system and be centrally stored in the maincontroller to let the system access the same IR codes that op...

61 commands including other macros and delays. See Macro Editor - Flow Chart on page 74 1. MACRO ID – Number of Macro up to 132 including any previously named (MacID) macros. 2. MACRO NAME – Name of Macro (optional). (MacNm) 3. COMMAND NUM – Number of Command up to 10. (Cmd#) 4. COMMAND TYPE – Selec...

62 SYSTEM INFO (SInfo) System Info allows the installer to view the controller’s manufacturing build properties. See System Info - Flow Chart on page 75 #CONTROLLERS (#Ctls) BUILD TIME (BTime) BUILD DATE (BDate) VERSION (Ver) 1. #CONTROLLERS Displays the number of CAM6.6 controllers in the system. (...

63 PERIPH SETUP Menu MEM NAME Procedure CONTROLLR ID Procedure BANK # BANK NAME SA VE CHANGES? Selects character Selects character position Repeat for each character in name BANK # MEMOR Y # MEMOR Y NAME Selects character Selects character position Repeat for each character in name SA VE CHANGES? BA...

64 PERIPH SETUP Menu MEM NAME Procedure CONTROLLR ID Procedure BANK NAME Procedure Peripheral Setup: Controller ID, Region, Factor y Init, System Info REGION Procedure F ACT OR Y INIT Procedure SYSTEM INFO Procedure Peripheral Menu This Procedure returns the ST2 T uner to its Factory settings Are yo...

76 Device Codes for TVs: AOC 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 ...

77 INSTALLER IR CODES Philips 1818, 1061 Pioneer 1010 Princeton 0113, 0295 Samsung 1190, 1204 Sensory Science 1126Sharp 1010 Sony 0850 Device Codes for SAT/DSS: AlphaStar 0772 Chaparral 0216 Crossdigital 1109 Echostar 0775, 1005 Expressvu 0775 GE 0566 GOI 0775 General Instrument 0869HTS 0775 Hitachi...

78 INSTALLER IR CODES Realistic 0203 Sony 0201, 0193 Technics 0204 Device Codes for DVD Players: Aiwa 0641 Apex Digital 0672, 0755, 0794, 0795, 0796,0797, 0830 Blue Parade 0571 Broksonic 0695 Daewoo 0784 Denon 0490, 0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 0522 Go Video 0715, 0783 Gradiente ...

79 INSTALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Channel Up Channel ...

82 KEY FUNCTION UNO-S1 CABLE PIP Chan Up PIPCU Learned Onl y PIP Chan Dn PIPCD Learned Onl y Input 1 In 1 A , V ID1, V ideo,T V p1 Input 2 In 2 B, V ID2,T V p2 Input 3 In 3 C, V ID3,T V p3 Input 4 In 4 V ID4,T V p4 Input 5 In 5 V ID5, AV 1, V CR,BNC Input 6 In 6 V ID6, AV 2, V DP,D V D,D V I Input 7...

87 INSTALLER KEY CODES VCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Ch...

89 INSTALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Learned Onl y C...

91 INSTALLER KEY CODES DVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, Traack 1 2 2 Digit 2, Track 2 3 3 Digit 3, Track 3 4 4 Digit 4, Track 4 5 5 Digit 5, Track 5 6 6 Digit 6, Track 6 7 7 Digit 7, Track 7 8 8 Digit 8,Track 8 9 9 Digit 9, Track 9 0 0 Digit 0, Track 10 V olume Up V olUp V olume Up V olume D...

93 INSTALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn ...

97 INSTALLER KEY CODES CD KEY FUNCTION UNO-S1 CD 1 1 Digit 1, Track 1,Dsc1 2 2 Digit 2, Track 2,Dsc2 3 3 Digit 3, Track 3,Dsc3 4 4 Digit 4, Track 4,Dsc4 5 5 Digit 5, Track 5,Dsc5 6 6 Digit 6, Track 6,Dsc6 7 7 Digit 7, Track 7,Dsc7 8 8 Digit 8,Track 8,Dsc8 9 9 Digit 9, Track 9,Dsc9 0 0 Digit 0, Trck1...

98 KEY FUNCTION UNO-S1 CD O ff O ff O ff , Po w er On/O ff 11 11 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl ...

99 INSTALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Bright,Raise ...

101 INSTALLER SOURCE NAMES UNO-S1 UNO-S2 A ux A UX A ux 1 A UX 1 A ux 2 A UX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Pla y er CD 1 CD Pla y er 1 CD 2 CD Pla y er 2 CD 3 CD Pla y er 3 Class Clas...

CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 102.5 102.5 102.5 RCA C ables 102.5 102.5 102.5 UNO-S1 UNO-S1 Sharing a single CAM6.6T (internal tuner) with multiplecontrollers This arrangement can support up to six CAM6.6 unitsfor up to 36 zones/6 sources. Each...

104 CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 102.5 102.5 102.5 92.5 92.5 92.5 UNO-S1 UNO-S1 SAMPLE CONFIGURATIONS MULTIPLE CONTROLLERS WITH TWO TUNERS System with two CAM6.6T (internal tuner) controllers The configuration below is suitable for 7 to 12 zon...

105 SAMPLE CONFIGURATIONS MULTIPLE CONTROLLERS WITH THREE TUNERS Sharing an ST2 Dual Tuner with multiple CAM6.6 con-trollers (with and without tuners) The configuration below is suitable for 7 to 12 zonesthat can access the ST2 Dual Tuner and the CAM6.6Ttuner. This configuration uses RCA “Y” cables ...

106 CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel(Controller ID 1) CAM6.6 RS-232 INTERFACE IR L R A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR L R ...

107 TECHNICAL SPECIFICATIONS Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 1dB Watts per channel: 20 Watts RMS ...

Copyright © 2004 Russound® All rights reserved. 28-0111 10/07/04 Russound5 Forbes Road, Newmarket, NH 03857tel 603.659.5170 • fax 603.659.5388e-mail: [email protected]