Rosewill RXS-3323 - Manuals

Internet Camera RXS-3323/RXS-4324 User Manual System Requirements z Windows 2000, XP, Vista, or Windows 7. z At least 256 MB of memory (512MB recommended) z A wireless (802.11n or 802.11g) or Ethernet network. z Internet Explorer 6.x or higher, Firefox 2.0 or later/ Safari Internet Web Browser z VGA...

Internet Camera RXS-3323/RXS-4324 User Manual ensuring seamless protection. z Optimal Viewing With the pan/tile functions, the camera can monitor everywhere from the left/right (0~355 degrees) or up/down (-10~90 degrees). In addition, there is 128 preset points and 16 camera tours can be assigning t...

Internet Camera RXS-3323/RXS-4324 User Manual Introduction of Hardware - Front View IR LEDs: These LEDs are used for night vision during night or dark environment to provide extra light source for the camera. Lens and Focus Ring: User can use this ring to make minor focus adjustment. Power and Wirel...

Internet Camera RXS-3323/RXS-4324 User Manual - Rear View Audio Output Jack: The Audio Output Jack allows the camera to output audio or alerting sound. Connect with a 3.5Ø phone jack speaker or headphone (speaker or headphone don’t come with camera) Power Jack: The input power is 12VDC which is prov...

Internet Camera RXS-3323/RXS-4324 User Manual Chapter 2. Installation Hardware Installation: - Camera LAN and Power Installation: 1. Please use cable connection for the first time setup. Using the RXS-4324 as example, please connect an Ethernet cable to the LAN socket located on the camera’s rear an...

Internet Camera RXS-3323/RXS-4324 User Manual - Wall Mount: 1. Fix the L-type bracket to the wall using two wall anchors and screws 2. Fix the camera to L-type bracket with the two supplied screws Software Installation: When you installed the Camera on a LAN environment, there are two easy ways to s...

Internet Camera RXS-3323/RXS-4324 User Manual 6. Click on “Next” to continue 7. Click on “Finish” to finish the installation. 8. After installation, you should be able to see a new icon “IPWizard II” on your desktop 14

Internet Camera RXS-3323/RXS-4324 User Manual Chapter 3. Connecting to the Camera Using IPWizard II: After the installation of the IPWizard II, double click on the icon, you will s this window popup as the basic management of the IPWizard II. Once it popup, the wizard will perform an auto search to ...

Internet Camera RXS-3323/RXS-4324 User Manual (One click to view the video from the IPWizardII directly) select the device you want to view and click the View button. Then you could see the video from camera directly. 8. LAN In case you want to change the IP related parameters of wired interface, pl...

Internet Camera RXS-3323/RXS-4324 User Manual If you do not want to change username and/or password, then just click “ Submit ” button to perform your setting accordingly. Click “ << ” button will go back to previous page. If you like to change username and/or password of the device, just clic...

Internet Camera RXS-3323/RXS-4324 User Manual Click on the SSID to select your wireless AP or router. We use WEP as an example here. Enter your SSID’s WEP key, then click “ >> ” Double check your WLAN setting (Default using DHCP IP as your wireless router provides IP address for the Camera) th...

Internet Camera RXS-3323/RXS-4324 User Manual You should see the confirmation Status Window popup as below. Please select “ OK ” to confirm these settings. The IPWizard II will start to configure this camera with your updated information. 19

Internet Camera RXS-3323/RXS-4324 User Manual Managing the Camera Access the device using IE for the first time: IPWizard II provides a very easy access for you in finding out your Camera’s IP address within your Network. You can start up the IPWizard II program by double click on this icon. - Three...

Internet Camera RXS-3323/RXS-4324 User Manual z Click on View Network Computers and devices z Once opened, you should see the Rosewill Camera model under the Other Device . z Please double click this to start the web browser for management. 3. Type in the IP address provided by the IPWizard II into ...

Internet Camera RXS-3323/RXS-4324 User Manual - Entering into Camera’s Management page via IE 1. You may be asking to enter the username and password when entering into the web browser on the computer. 2. If you are prompt to ask entering the username and password. Please type in “ admin ” and leave...

Internet Camera RXS-3323/RXS-4324 User Manual Management Page: When you first entering into the management page, you should see your IE as below: 1. Video Profile RXS-3323 and RXS-4323 provide 13 Video Profiles. The default Profile is H.264 / VGA (640 x 480). Please refer to Appendix for more detail...

Internet Camera RXS-3323/RXS-4324 User Manual Chapter 4. Managing the Device There are many functions of the Camera can help to make you rlife easier! However, they also require a careful setting to meet your needs. Please see the following section as we will introduce in detail on what these setups...

Internet Camera RXS-3323/RXS-4324 User Manual 1. MAC address: Displays the Ethernet MAC address of the device. Note that user can not change it. 2. Obtain IP address automatically (DHCP): DHCP: Dynamic Host Configuration Protocol. Enable this checked box when a DHCP server is installed on the networ...

Internet Camera RXS-3323/RXS-4324 User Manual could assign the second port number of http protocol, and the WAN users should follow the port number to login. If the http port is not assigned as 80, users have to add the port number in back of IP address. For example: http://192.168.0.100:8080 . Ther...

Internet Camera RXS-3323/RXS-4324 User Manual 6. SSID: This is the name of the wireless network the device is configured for. The field accepts up to 32 alphanumeric characters. The name must be exactly the same as that used in the wireless access point, or the connection will not be established. Le...

Internet Camera RXS-3323/RXS-4324 User Manual DDNS: DDNS: Stands for Dynamic Domain Name Server Your Internet Service Provider (ISP) provides you at least one IP address which you use to connect to the Internet. The address you get may be static, meaning it never changes, or dynamic, meaning it’s li...

Internet Camera RXS-3323/RXS-4324 User Manual 1. RTSP Port: Choose the RTSP port. The RTSP protocol allows a connecting client to start a video stream. Enter the RTSP port number to use. The default value is 554. 2. RTP Port: Specify the range of transmission port number of video stream. The default...

Internet Camera RXS-3323/RXS-4324 User Manual 1. UPnP: To enable or disable the UPnP service here. 2. Friendly Name: Shows the friendly name of this device here. 3. UPnP NAT Traversal: When enabled, the device will attempt to configure port mapping in a NAT router on your network, using UPnP™. Note ...

Internet Camera RXS-3323/RXS-4324 User Manual IP Notification: In case the IP address is changed, system is able to send out an email to alert someone if the function is enabled. 1. SMTP Notification (e-mail): If enable this function, then the “ Send to “ and “ Subject ” fields need to be filled. Yo...

Internet Camera RXS-3323/RXS-4324 User Manual 4. TCP Notification: If enable this function, then the “ TCP Server “, “ TCP Port ”, and “ Message ” fields need to be filled. 5. TCP Server: Type the server name or the IP address of the TCP server. 6. TCP Port: Set port number of TCP server. 7. Message...

Internet Camera RXS-3323/RXS-4324 User Manual reference to set LED ON/OFF Threshold. 10. De-Noise: De-Noise can remove or lower unwanted noise and preserve fine details and edges. Preset Setting: This page provides the edit tool to modify or delete the Preset points where you set under Advanced PTZ ...

Internet Camera RXS-3323/RXS-4324 User Manual 1. Tour Name: The group name of the sequence of camera tour. The maximum number of camera tour is 16. 2. Running: Enable or disable this camera tour. 3. Preset: Set the sequence of the tour. Maximum 16 points can be assigned. The selected preset position...

Internet Camera RXS-3323/RXS-4324 User Manual 1. Enable DIPS function of the device 2. Check your Device ID from this page. This is a unique number for each device. 3. If your device is behind a NAT router, please configure your device properly. You could refer to section “Install the Camera behind ...

Internet Camera RXS-3323/RXS-4324 User Manual 4. NTP Server: Type the host name or IP address or domain name of the NTP server. 5. NTP Sync. Interval: Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server 6. Time zone: Set the time difference...

Internet Camera RXS-3323/RXS-4324 User Manual 5. Firmware Upgrade procedure: The device supports new firmware upgrade (the software that controls the operation in the device). Please contact your dealer for the latest version if necessary. Download the latest firmware file from our website or your d...

Internet Camera RXS-3323/RXS-4324 User Manual - Video This device provides 2 modes of video profile. The first one is Mega-pixel mode which supports video resolution up to Mega-pixel. However the maximum frame rate of this mode is up to 15fps only. The second one is VGA mode which supports video res...

Internet Camera RXS-3323/RXS-4324 User Manual fps, then the image will be updated for 15 frames per second as possible. User need to set reasonable max frame rate versus video quality under the limited bandwidth. 4. GOP Control: This defines the Intra/Inter-frame (I/P) ratio of this profile. For exa...

Internet Camera RXS-3323/RXS-4324 User Manual Once set ROI, you can select ROI in the Video Profile ; you can then see the focus image of the ROI area: ROI 0 : The area size of ROI 0 is H.264 / VGA, 640 x 480. ROI 1 : The area size of ROI 1 is H.264 / QVGA, 320 x 240. 46

Internet Camera RXS-3323/RXS-4324 User Manual - Audio 1. Audio: To enable or disable audio function 2. Audio Mode: To select Simplex or Full duplex (2-way audio) mode 3. Input Gain: To adjust gain of input audio 4. Output Gain: To adjust gain of output audio - User Use this menu to add, update, or r...

Internet Camera RXS-3323/RXS-4324 User Manual 3. Add, update, and remove of Users account: Manage the user’s account of viewer user. - E-Mail You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users want to send the alarm message out, it will need to configure par...

Internet Camera RXS-3323/RXS-4324 User Manual Authentication: Disable : if no authentication is required when an e-mail is sent. Enable : if authentication is required when an e-mail is sent. 5. Authentication User name: Type the user name for the SMTP server if Authentication is Enable . 6. Authent...

Internet Camera RXS-3323/RXS-4324 User Manual objects trigger motion detection. The lower object size will even small objects trigger motion detection too. Generally speaking, the smaller size will be easier to trigger event. 5. Sensitivity: Defines the sensitivity value of motion detection. The hig...

Internet Camera RXS-3323/RXS-4324 User Manual 1. Name: User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. 2. TCP Server: Type the server name or the IP address of the TCP server. 3. TCP Port: Set port number of TCP server. HTTP Server ...

Internet Camera RXS-3323/RXS-4324 User Manual Example 2: Send file to E-Mail server by motion triggered from Friday 18:00 to Saturday 06:00 1. Select event trigger. 2. Enable time: start from Friday 18:00 and keep work in 12 hous, so it will stop on Saturday 06:00. 3. Trigger by: Motion Area (Added ...

Internet Camera RXS-3323/RXS-4324 User Manual Advance PTZ Advance PTZ allows you to set the Camera movement and speed. You can also set Preset points and enable Tour (combine by different Preset Points) here. 1. Live View: Returns to the main viewing page 2. PTZ Control camera up/down/left/right and...

Internet Camera RXS-3323/RXS-4324 User Manual 2. Please right click on it and select “ Temporarily Allow Scripted Windows ” 3. Click the arrow until your desired area appear, then click “ Add ”. You will be asking to enter the name of the Preset point you want to call. Please enter your desired name...

Internet Camera RXS-3323/RXS-4324 User Manual 4. Whenever you move your camera to, you can always return to your Preset point by selecting it and then click “ Go ”. - Selecting Tour: 1. You will need to set Tour under Setting -> Camera -> Tour Setting . 2. You will also need to set at least On...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix A: Restore Factory Default Settings There is a button hidden in the pinhole near to the RJ-45 connector. This button is used to restore the all factory default settings. Sometimes restarting the device will make the system back to a normal state...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix B: Troubleshooting & FAQ Question Answer Features The video and audio codec is adopted in the device. The device utilizes H.264, MPEG4 and JPEG triple compression to providing high quality images. Where H.264 and MPEG4 are standards for vide...

Internet Camera RXS-3323/RXS-4324 User Manual the device. IPWizard II program cannot find the device. • Re-power the device if cannot find the unit within 1 minutes. • Do not connect device over a router. IPWizard II program cannot detect device over a router. • If IP address is not assigned to the ...

Internet Camera RXS-3323/RXS-4324 User Manual Network Camera’s private IP address. • The port number assigned in your Network Camera might not be available via Internet. Check your ISP for available port. • The proxy server may prevent you from connecting directly to the Network Camera, set up not t...

Internet Camera RXS-3323/RXS-4324 User Manual changed in order for the device to be accessible outside your LAN. • Make sure that the device isn’t conflicting with any other web server running on your LAN. • Check the configuration of the router settings allow the device to be accessed outside your ...

Internet Camera RXS-3323/RXS-4324 User Manual •The configuration on the device image display is incorrect. You need to adjust the image related parameters such as brightness, contrast, hue and sharpness properly. Image flickers. • Wrong power line frequency makes images flicker. Make sure the 50 or ...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix C: Ping IP Address The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm th...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix D: Bandwidth Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, codec type, and quality setting of server. Here is a guideline to help you roughly estimate ...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix E: Specifications Camera Specifications Camera Image Device 1.3 Mega-pixel image sensor Max Resolution 1280 x 1024 pixels Lens f:4.3mm / F:1.8 Sensitivity 1.0V/lux-sec (550nm) Video / Image / Audio Video Format H.264, MPEG4 and Motion JPEG simul...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix F: Configure Port Forwarding Manually If you want to access the Camera over the internet, you will need to use it together with a router / wireless router. The Camera’s IP address needs to be setup as fixed IP address. You will also need to set ...

Internet Camera RXS-3323/RXS-4324 User Manual Your WAN IP will be listed here Note : Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and wil...

Internet Camera RXS-3323/RXS-4324 User Manual Port section, click Apply. z Scheduling should be set to Always so that the camera images can be accessed at any time. A check mark appearing before the entry name will indicate that the ports are enabled. Important: Some ISPs block access to port 80. Be...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix G: DDNS Configuration If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP Service. Get your own domain like www.yourname.com, www.yourname.org etc. Your domain name's dynamic IP address is aut...

Internet Camera RXS-3323/RXS-4324 User Manual (3). After the columns show up at the left side, click “ Create Account”. (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and f...

Internet Camera RXS-3323/RXS-4324 User Manual (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. 74

Internet Camera RXS-3323/RXS-4324 User Manual (6). Enter the web page http://www.dyndns.org/ again. Input your username and password that you just applied to login administration interface of DDNS server. (7). If the correct username and password are input, you can see the following picture at the t...

Internet Camera RXS-3323/RXS-4324 User Manual (10). Click the “ Get Started ”. (11). We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is easy to remember. (Pink No.2) The 3 rd step is to click “Offline Hostname” from...

Internet Camera RXS-3323/RXS-4324 User Manual Appendix H: 3GPP and iPhone To use the 3GPP function, in addition to previous section, you might need more information or configuration to make this function work. Note: that to use the 3GPP function, it strongly recommends to install the Networked Devic...