Page 2 - Included in the Kit; Dual Output Drive Power Supply; Cable Adapter Features
User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter Included in the Kit The USB to SATA/IDE Cable Adapter Complete Kit includes the items listed below. 1. USB to SATA/IDE Cable Adapter The ...
Page 3 - Connecting SATA 3.5” Hard Drives
2 User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 Many Operating Systems immediately indicate that the USB Cable Adapter and drive have been recognized and if the drive is already formatted and partitioned in a compatible file structure the drive will autom...
Page 4 - Connecting IDE 2.5” Hard Drives; Formatting & Partitioning
3 User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 DATA while the smaller, 4 pin connector is for Drive Power. Plug in the Drive Power connector. This connector has cut corners and must be installed with the correct orientation. Make sure the power switches ...
Page 5 - Specifications
4 User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 After your finish this initialization process the drives will then be ready to use. Again, every system is slightly different especially when it comes to RAID and RAID levels. Read the documentation carefull...
Page 6 - Package Contents
5 User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 Package Contents RCW-608 X User manual X Power cord X Power adapter X SATA cable X Driver disc X Silicon protection case for 2.5” hard drive X Silicon protection case for 3.5” hard drive X Installation . Plu...
Page 7 - ATAPI device
6 User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 c. 3.5" SATA hard drive d. 5.25" ATAPI device 2. Connect the power adapter set. ATAPI device SATA cable
Page 9 - Notification
8 User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 4. Plug the power adapter to power source and turn on the power (Please make sure the voltage is between 00~240V) 5. Plug the USB2.0 cable to PC and wait for PC auto-detection. Driver is needed only in old s...
Page 10 - Trouble shooting; A: The reason of the problems could be:; Connect it to PC after the Windows complete boot up.; Thank you for purchasing a quality Rosewill Product.
9 User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 Trouble shooting i. Q: I completed the installation by following the menu but MS Windows can’t detect any hard drive. A: The reason of the problems could be: . Hard drive has not completed the format or F-di...