Rosewill 5600 - Manuals - manualsarea.com

Page 2 - Contents; Configuration; Installing Motherboard; Information

CASE 5600 series User Manual 1 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill Contents Conﬁguration Features Descriptions Installation 1. Opening Chassis 2. Installing Motherboard 3. Installing 3.5" HDD 4. Installing 5.25" Device 5. Installing Add on Card 6. Installing Floppy 7. C...

Page 3 - Confi guration; Slots

CASE 5600 series User Manual 2 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill Conﬁ guration Dimension ( W x H x D ) M / B Size Drive Bay Expansion Slots Thermal Solution Air Filter I /O Por t Bracket Megal Material 7.9" x 17.3" x 19.4" AT X, Micro AT X External : 4 x 5.25"...

Page 4 - Features Descriptions

CASE 5600 series User Manual 3 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill Features Descriptions Front 120mm Fan Rear 120mm Fan Sliding Rails for 5.25" device Sliding Rails for 3.5" HDD Screw-less Add-on Card assembly Door opening up to 270 Degree Easy-clean ﬁ lter (in left sid...

Page 6 - Installation

CASE 5600 series User Manual 5 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill Installation 1.Opening Chassis 1.1Take off the thumb screws on the back plane1.2Push the Key-button 1.3Roll the side cover anticlockwise to open 1.4Push hooks marked in red circle to detach the front panel from ...

Page 8 - Micro ATX Motherboard

CASE 5600 series User Manual 7 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill Micro ATX Motherboard 2.1Locate and align the screw holes on the motherboard and chasis; place the motherboard at the correct position,and then screw copper motherboard stand-offs brass studs onto chassis's meta...

Page 11 - Installing Add on Card

CASE 5600 series User Manual 10 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill 5.Installing Add on Card 5.1Push out to loosen add on card kit 5.2Insert your add on card into the right slot 5.3Push down add on card kit to fasten the addon card

Page 15 - GND

CASE 5600 series User Manual 14 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill 9.USB Port NOTE : 1.Make sure that your motherboard offers USB interface. NOT every motherboard offers it.2.NEVER connect a IEEE1394 connector to the USB pins. It will damage the motherboard. 9.1 Read your moth...

Page 18 - System Control Connectors

CASE 5600 series User Manual 17 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill 12.System Control Connectors 1. Read your motherboard’s user manual to find the pins for these system control connectors. 2. Refer to your motherboard’s user manual to connect these connectors correctly. PLED+ ...

Page 19 - Thank you for purchasing a High-Quality Rosewill Product.

CASE 5600 series User Manual 18 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill Thank you for purchasing a High-Quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product. If you have any question while...