Roland RD-700NX - Manuals

8 USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel . . . . . . . . . . . . . . . . ...

10 Panel Descriptions 1. [VOLUME] slider Adjusts the overall volume that is output from the rear panel OUTPUT jacks, PHONES jack, and BALANCED OUT jacks (p. 18). 2. [V-LINK] Button Switching this on lets you control external V-LINK compatible video equipment connected to the RD-700NX (p. 83). 3. EQU...

12 Panel Descriptions Rear Panel 12 13 14 15 16 17 18 19 20 21 12. [POWER ON] Switch This switch turns the power on/off (p. 17). 13. AC IN Connector Connect the included power cord to this connector (p. 14). 14. USB MEMORY Connector Connect separately sold USB memory or a CD-ROM drive here (p. 18).U...

13 Getting Ready Placing the RD-700NX on a Stand If you place the RD-700NX on a stand, you must use the KS-G8 (sold separately). When placing the RD-700NX on the KS-G8, place it in the position shown below. NOTE Using the RD-700NX with any other stand may produce an unstable situation, possibly caus...

14 Getting Ready Connecting the Power Cord Rear Panel 1. Before you begin making connections, confi rm the following . Is the volume level of the RD-700NX or connected amp turned all the way down?Is the power to the RD-700NX or connected amp turned off ? 2. Connect supplied power cord to the AC IN c...

15 Getting Ready Connecting the External Equipment to RD-700NX The RD-700NX is not equipped with an amplifi er or speakers. In order to produce sound, you need to hook up audio equipment such as a monitor speaker or a stereo set, or use headphones. * Audio cables, USB cables, MIDI cables, headphones...

16 Getting Ready 1. Before you begin making connections, confi rm the following . Is the volume level of the RD-700NX or connected amp turned all the way down?Is the power to the RD-700NX or connected amp turned off ? 2. Connect supplied power cord to the AC IN connector of the RD-700NX, and plug th...

17 Getting Ready Turning the Power On and Off NOTE Once the connections have been completed (p. 15), turn on power to your various devices in the order specifi ed. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. Turning On the Power...

18 Getting Ready Adjusting the Volume 1. Adjust the volume using the [VOLUME] slider . Move the slider up to increase the volume, or down to lower it.Also adjust the volume of the connected device to an appropriate level. Adjusting the Display Contrast The characters in the display may be diffi cult...

19 Getting Ready Connecting the CD Drive If you’re using a stand (KS-G8), you can use the screw holes on the bottom of the RD-700NX to attach a CD drive (sold separately). MEMO For information on turning on/off your CD drive and how to insert or remove a CD, refer to the owner’s manual that came wit...

20 RD-700NX Rewritable memory USB memory SONG Live Set Non-rewritable memory Preset memory Live Set 300 sets Rewritable memory User memory Live Set 100 sets System memory Temporary memory (Temporary area) Live Set Temporary memory Temporary area Data for the patch you select via the front panel butt...

21 Overview of the RD-700NX About Live Sets The RD-700NX lets you store the sounds that you create.A sound you create is called a “Live Set”; you can use the buttons to recall a Live Set and then play it.Live Sets are organized into a “preset bank” and a “user bank.” Live Set Controller Section Soun...

22 Overview of the RD-700NX Main Screens The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in t...

23 Overview of the RD-700NX Special Indications Indication Explanation When in the Live Set screen, this symbol will be shown in the upper-right part of the screen whenever you select a Live Set that has “TW-Organ 1–10” assigned to any of its layers. Pressing the Cursor [ ] button while this mark is...

24 Overview of the RD-700NX Editing a Value When changing settings values, you can use the [DEC] and [INC] buttons, VALUE dial, or the LIVE SET buttons (numeric keys). [DEC] Button, [INC] Button Pressing the [INC] button increases the value, and the [DEC] button decreases it. Purpose Panel operation...

26 Performance Piano Performances Now, try performing with the piano.The RD-700NX lets you call up the ideal settings for piano performance at any time simply by pressing a button. You can also select your preferred tones and settings and store them to the RD-700NX’s buttons. 1 2 1. Press the ONE TO...

27 Performance Performing with a Variety of Live Sets The RD-700NX comes with a many built-in Sounds.Each one of these individual sounds is called a “Live Set.”Live Sets are assigned to the LIVE SET buttons according to the tone category selected. Each category has several variations.Try selecting a...

28 Performance Playing Multiple Tones with the Keyboard The RD-700NX features four Internal layers (UPPER 1, UPPER 2, LOWER 1, and LOWER 2), and one tone can be assigned to each of these layers.You can perform using combinations of tones by turning each layer on or off . You can have multiple tones ...

29 Performance Playing Diff erent Tones in Two Diff erent Sections of the Keyboard Such a division of the keyboard into right- and left-hand sections is called a “ Split,” and the key where the division takes place is called the “Split Point.”While in Split mode, a sound played in the right side is ...

30 Performance Changing the Tone for a Layer 1 2 3 3 1. Press the [Layer EDIT] button to access the layer edit screen . 2. Use the Cursor [ ] [ ] buttons to select the layer whose tone you want to change . Layers that have their Layer switch turned off are dimmed in the screen. 3. Use the LIVE SET b...

31 Performance Adjusting the Volume Level for Individual Layers With the RD-700NX, each of the parts that is performed using the internal sound generator is referred to as a Layer.For each layer (UPPER 1, UPPER 2, LOWER 1, LOWER 2), you can use the Layer switch and Layer LEVEL slider to turn the sou...

32 Performance Transposing the Key of the Keyboard (TRANSPOSE) You can transpose performances without changing the keys you are playing, as well as change the pitch by an octave. This feature is called “ Transpose.”This is a convenient feature to use when you want to match the pitch of the keyboard ...

33 Performance Adding Reverberation to the Sound (REVERB) The RD-700NX can apply a reverb eff ect to the notes you play on the keyboard.Applying reverb adds pleasing reverberation to what you play, so it sounds almost as if you were playing in a concert hall. 1 2 1. Press the [REVERB] button . The r...

34 Performance Changing the Sound’s Pitch in Real Time While playing the keyboard, move the lever to the left to lower the pitch, or to the right to raise the pitch. This is known as Pitch Bend.You can also apply vibrato by manipulating the lever away from you. This is known as Modulation.If you mov...

35 Performance Adjusting the Levels of Each Frequency Range (EQUALIZER) The RD-700NX is equipped with a four-band equalizer.You can use the EQUALIZER [LOW] knob, [LOW MID] knob, [HIGH MID] knob, and [HIGH] knob to adjust the level of each frequency range.By holding down the [EXIT/SHIFT] button and t...

36 Performance Disabling the Button By engaging the Panel Lock function, you can disable panel functions. This prevents settings from being changed inadvertently on stage or in other such situations.However, you’ll still be able to operate the following buttons and knobs even while Panel Lock is in ...

37 Using the Convenient Functions in Performances Playing Rhythm The RD-700NX features internal drum patterns complementing Jazz, Rock, and other various musical genres. These drum patterns are referred to as “ Rhythms.” 1 3 2 1. Press the [SELECT] button to make the button indicator light . The SON...

38 Using the Convenient Functions in Performances Playing the Songs Here’s how to play back SMF music fi les, audio data, or songs from a CD. MEMO You can play songs that are saved on USB memory (sold separately). For details, refer to “Connecting the USB Memory” (p. 18).If you want to connect a sep...

39 Using the Convenient Functions in Performances Changing Song Tempos 1. In the SONG screen, press the Cursor [ ] button or [ ] button to move the cursor to the tempo indication in the top line of the screen . If an audio fi le is selected, the value will be indicated as a percentage. 2. Use the [D...

40 Using the Convenient Functions in Performances Recording Audio The RD-700NX lets you easily record your performance as an audio fi le.You can then play back the recording to evaluate your performance. 3 7 8 6 4 5 9 10 Getting ready to record NOTE You must not disconnect the USB memory. 1. Connect...

42 Using the Convenient Functions in Performances Simulating the Creation of Organ Tones When any of the “TW-Organ 1–10” Tones is selected for any of the layer, you can perform in “ Tone Wheel mode,” in which the creation of organ sounds is simulated.An organ features nine “harmonic bars” that can b...

43 Using the Convenient Functions in Performances Changing the Undulation of the Organ Tone (Rotary Effect) While the Tone Wheel screen is displayed, you can change the undulation rate of the Rotary effect with the Pitch Bend lever.The Rotary effect is an effect that recreates the sound of the rotat...

44 Using the Convenient Functions in Performances Selecting Stored Settings (Live Set ) The RD-700NX’s Layer (p. 56) and EXTERNAL Layer (p. 59) tone settings, eff ect settings, and other such settings are collectively referred to as a “ Live Set.”Once you’ve stored your preferred settings, and setti...

45 Using the Convenient Functions in Performances Storing Settings to Live Sets If you want to use the changed content as a new Live Set, use the following procedure to save the settings to user bank.You can store 100 Live Sets on the RD-700NX.You can also change the name of a Live Set. 1. Press the...

46 Making Detailed Settings for the Piano Tones You can make detailed settings to adjust the piano sound that’s used when you press the ONE TOUCH PIANO button (p. 26).These detailed settings can be saved for each variation. NOTE When you press one of the ONE TOUCH PIANO buttons, all settings other t...

48 Making Detailed Settings for the ONE TOUCH Tones Changing the Key Touch You can make advanced settings for the touch used for the keys.Changing this setting also changes the Key Touch setting in Edit Mode (p. 71). Parameter Value Description Key Touch SPR LIGHT An even lighter setting than LIGHT....

49 Making Detailed Settings for the ONE TOUCH Tones Parameter Value Description Peaking Gain -15–+15 dB Amount of boost/cut produced by the filter at the specified frequency region of the input sound Peaking Q 0.5, 1.0, 2.0, 4.0, 8.0 Width of the frequency region boosted/cut by the Peaking Gain para...

50 Making Detailed Settings for the ONE TOUCH Tones Making Detailed Settings for the E. Piano Tones The RD-700NX contains a SuperNATURAL E. Piano sound generator.The SuperNATURAL E. Piano sound generator is Roland’s completely new sound generator, which faithfully models the varieties and characteri...

53 Making Detailed Settings for the ONE TOUCH Tones WURLY This combines REED EP with a variation of it, reproducing a typical E. piano sound of the ‘60s. Parameter Value Description Treble -50–+50 Amount of boost/cut for the high-frequency range Bass -50–+50 Amount of boost/cut for the low-frequency...

54 Making Detailed Settings for Tones You can make more detailed settings to the tones assigned to each of the layer.In certain selected Tones, there may be parameters that cannot be changed. 1. In the Live Set screen, press the [TONE EDIT] button . The [TONE EDIT] button lit, and the TONE EDIT scre...

56 Making Detailed Settings for Tones Making Layer Settings The RD-700NX features four Parts (UPPER 1, UPPER 2, LOWER 1, and LOWER 2) that you can use for freely controlling the internal parts with the RD-700NX’s buttons and keyboard. These four parts that are used for controlling the internal parts...

58 Using the RD-700NX As a Master Keyboard By connecting an external MIDI device to the MIDI OUT connectors on the RD-700NX’s rear panel, you can then control the external MIDI device from the RD-700NX.Normally, the RD-700NX will transmit note messages from the MIDI OUT connector, but if you press t...

59 Using the RD-700NX As a Master Keyboard Adjusting the Volume of Each Layer Layer Switch Layer LEVEL Slider [MIDI] Button When the [MIDI] button is lit, you can use the Layer switch and Layer LEVEL sliders to control the EXTERNAL Layer in the same way as with the Layer (p. 21). Layer Switch This s...

60 Using the RD-700NX As a Master Keyboard Setting the MIDI Transmit Channel When you have fi nished connecting the external MIDI device, match the keyboard’s Transmit channel and the Receive channel for each of the external MIDI sound generator’s Parts. Sounds is produced when the MIDI channels for...

61 Using the RD-700NX As a Master Keyboard Selecting Sounds on an External MIDI Device To switch the tones of an external MIDI device, the program number and the MSB/LSB of the Bank Select message are entered as numerical values on the RD-700NX. 1 2 1. Press the [MIDI] button so the “MIDI” indicator...

62 Using the RD-700NX As a Master Keyboard Adjusting the Volume and Pan (Volume/Pan) Sets the volume and the panning (localizes sound image) for each of the Tones.The Volume setting is mainly used when multiple tones are playing to obtain the desired balance in volume between each layer.The Pan sett...

63 Using the RD-700NX As a Master Keyboard Changing the Range That Plays in Response to the Velocity (Velocity Range) This specifies the lower limit (LWR) and upper limit (UPR) of the range in which the tone is played according to how strongly the keys are played (velocity). Make this setting when y...

64 Using the RD-700NX As a Master Keyboard Setting the Range for the Change in Pitch with the Pitch Bend Lever (Bend Range) This sets the amount of pitch change that will occur when you move the Pitch Bend lever (4 octaves). Parameter RPN Value B .R (Bend Range) 00H/00H - - - (OFF), 0–48 (semitone) ...

65 Detailed Settings for Each Function The MENU button can be used to make a variety of settings. Setting Parameters To setting screen Leaving setting screen Change the value You can input the value using the LIVE SET buttons, and press the [ENTER] button to set the value . (The number of Edit scree...

66 Detailed Settings for Each Function Menu Parameter Page 4 . Compressor Type p. 76 Split Frequency L p. 76 Split Frequency H p. 76 Depth p. 76 Level p. 76 Attack Time p. 76 Release Time p. 76 Threshold p. 76 Ratio p. 76 5 . File Live Set Save p. 77 Live Set Load p. 78 Live Set Delete p. 78 Live Se...

67 Detailed Settings for Each Function Tuning to Other Instruments’ Pitches (Master Tune) For a cleaner ensemble sound while performing with one or more other instruments, ensure that each instrument’s basic pitch is in tune with that of the other instruments. In general, the tuning of an instrument...

68 Detailed Settings for Each Function Parameter Value Function/Parameter Setting Changed FC1 FC2 145: Live Set UP Switches the Live Sets in ascending order. 146: Live Set DOWN Switches the Live Sets in descending order. Retaining the Current Tone Even When Tones are Switched (Tone Remain) This sett...

70 Detailed Settings for Each Function Setting the Tuning Method (Temperament/Key) This sets the tuning and keynote (tonic).Most modern songs are composed and played with the assumption that equal temperament will be used, but when classical music was composed, there were a wide variety of other tun...

71 Detailed Settings for Each Function Changing the Key Touch (Key Touch) The setting below allows you to adjust the response you get from the keyboard when you finger the keys. Parameter Value Description Key Touch SPR LIGHT An even lighter setting than LIGHT. LIGHT This sets the keyboard to a ligh...

72 Detailed Settings for Each Function Pedal/[S1] [S2] Buttons Assignments Here’s how to change the functions that are assigned to the pedals, the [S1] [S2] buttons, and the sliders. 1. Press the [MENU] button, getting the indicator to light . The Menu screen appears. 2. Press the Cursor [ ] [ ] but...

73 Detailed Settings for Each Function Assigning Functions to the [S1] [S2] Buttons (S1/S2 Assign) This setting determines the function of the [S1] and [S2] buttons. Parameter Value Function/ Parameter Setting Changed S1/S2 00: OFF No control 01: COUPLE +1OCT Playing a key will also sound an additio...

74 Detailed Settings for Each Function Reverb/Chorus Settings Here you can edit the reverb and chorus settings. NOTE Making abrupt changes in the settings values may cause the sound to become distorted or overly loud. Carefully monitor volume levels while making the settings. 1. Press the [MENU] but...

75 Detailed Settings for Each Function Setting Chorus and Delay Chorus adds depth and spaciousness to the sound. You can select whether to use this as a chorus effect or a delay effect.You can set the amount of Chorus applied separately for each individual tone (p. 56). Chorus Type You can select th...

76 Detailed Settings for Each Function Making the Compressor Settings This is a stereo compressor (limiter) that is applied to the final output.With separate settings for the high-frequency range, midrange, and low-frequency range, this reduces inconsistencies in volume levels by compressing the sou...

77 Detailed Settings for Each Function File Management Saving a Live Set File (LIVE SET Save) A single, individual file containing a collection of 100 Live Sets registered to the RD-700NX is called a “Live Set file.”This Live Set file can be saved in the RD-700NX’s internal memory or on USB memory (...

78 Detailed Settings for Each Function Calling Up Live Set Files (LIVE SET Load) Here’s how to load a previously saved Live Set file. NOTE The current settings are erased when a Live Set file is called up. Be sure to save you would like to keep first before calling up (p. 77). 1. Press the [MENU] bu...

82 Detailed Settings for Each Function Making the Rhythm Settings The RD-700NX features internal drum patterns complementing Jazz, Rock, and other various musical genres. This kind of drum pattern is called a “Rhythm.” 1. Press the [MENU] button, getting the indicator to light . The Menu screen appe...

83 Detailed Settings for Each Function About V-LINK V-LINK ( ) is a function that provides for the play of music and visual material. By using V-LINK-compatible video equipment, visual eff ects can be easily linked to, and made part of the expressive elements of a performance.For example, if you use...

84 Detailed Settings for Each Function Changing Settings Related to Song Playback You can change a variety of settings related to song playback. 1. Press the [MENU] button, getting the indicator to light . The Menu screen appears. 2. Press the Cursor [ ] [ ] buttons to select “8 .Utility,” and press...

85 Detailed Settings for Each Function Restoring the Settings to the Factory Condition The settings stored in the RD-700NX can be returned to their factory settings. NOTE • Executing “Factory Reset All” results in deletion of the Live Sets (p. 44). If you want to keep the recorded content, save the ...

86 Connecting External MIDI Devices Recording RD-700NX Performances to an External MIDI Sequencer Now, try using an external sequencer to record your music onto multiple tracks, and then play back the recorded performance. Connecting to an External Sequencer NOTE To prevent malfunction and/or damage...

87 Connecting External MIDI Devices 3. Set the Rec Setting and Local Control . Use the procedure described in the previous section “Settings for Recording” to make the following settings. Parameter Value Rec Mode ON Local Switch OFF 4. Begin recording with the external sequencer . 5. Perform on the ...

88 Connecting External MIDI Devices Playing the RD-700NX’s Internal Sound Generator from an External MIDI Device Try Playing the RD-700NX from an external MIDI Device. Making Connections NOTE To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off...

89 Connecting to a Computer via the USB MIDI Connector If you use a USB cable (commercially available) to connect the USB MIDI connector located on the RD-700NX’s rear panel to the USB connector of your computer, you’ll be able to do the following things. • Use the RD-700NX to play SMF music fi les ...

90 Connecting to Your Computer Switching USB Drivers The USB driver to be used when a computer is connected to the USB connector is determined as follows: 1. Press the [MENU] button . 2. Press the Cursor [ ] [ ] buttons to select “0 .SYSTEM,” and then press the [ENTER] button . 3. Press the Cursor [...

91 Material Troubleshooting If the RD-700NX does not function in the way you expect, first check the following points. If this does not resolve the problem, consult your dealer or a nearby Roland Service Station. * If certain messages appear in the display during operation, please refer to “Error Me...

94 Material Problem Check/Solution Page The sound of the higher notes suddenly changes from a certain key On an acoustic piano, the approximately one and a half octaves of notes at the top of the keyboard will continue sounding regardless of the damper pedal. These notes also have a somewhat differe...

95 Material Indication Situation Action Error 30The internal memory capacity of the RD-700NX is full . The internal memory capacity of the RD-700NX is full. – Error 40The instrument can’t deal with the excessive MIDI data . The RD-700NX cannot deal with the excessive MIDI data sent from the external...

96 Material Effect List MFX 00: THRU 01: EQUALIZER 02: SPECTRUM 03: ISOLATOR 04: LOW BOOST 05: SUPER FILTR 06: STEP FILTER 07: ENHANCER 08: AUTO WAH 09: HUMANIZER 10: SP.SIMULATR 11: PHASER 12: STEP PHASER 13: MULT PHASER 14: INF PHASER 15: RING MODLTR 16: STEP R.MOD 17: TREMOLO 18: AUTO PAN 19: STE...

97 About the Ivory Feel Keyboard Features of an Ivory Feel keyboard Traditional piano keys are made from the best materials-ivory (for white keys) and ebony (for black keys). The Ivory Feel keyboard uses the latest in technology to reproduce the touch and feel of these materials.An Ivory Feel keyboa...

98 Main Specifications RD-700NX: Digital Piano (Conforms to General MIDI 2 System) [Keyboard Section] 88 keys (PHA III Ivory Feel Keyboard with Escapement) [Sound Generator Section]Maximum Polyphony 128 voices Parts Live Set (4 layers) +16 parts Sound Generator SuperNATURAL PianoSuperNATURAL E. Pian...

99 A AC Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ATK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Attack Time (Offset) . . . . . . . . . . . ....

102 Purpose-Oriented Index This index lists the main setting items relevant to play of the RD-700NX’s keyboard. Volume Setting Changing the Volume for the entire RD-700NX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [VOLUME] slider (p. 18) . . . . . . . ....

For the USA DECLARATION OF CONFORMITY Compliance Information Statement Model Name : Type of Equipment : Responsible Party : Address : Telephone : RD-700NX Digital Piano Roland Corporation U.S. 5100 S. Eastern Avenue, Los Angeles, CA 90040-2938 (323) 890-3700 Model Name : Type of Equipment : Responsi...

Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. AFRICA EGYPT 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-417-1828 REUNION MARCEL FO-YAM Sarl 25 Rue Jules Her...