Roland JV-1010 - Manuals

7 How to Read This Owner’s Manual This owner’s manual is organized as follows. Quick Start This section is intended for those using the JV-1010 for the first time, and explains how to use various functions in a simple way. Please read Quick Start and follow along by actually operating the JV- 1010. ...

8 Contents Main Features ........................................................................................10 Front and Rear Panel ............................................................................11 Quick Start ........................................................ 13 Getting Read...

10 Main Features ■ Incorporates the JV-1080 Sound Module The JV-1010 is a 16-part multitimbral internal sound generator that can generate up to 64 voices simultaneously, and is equipped with a multi-effects processor (EFX) offering a total of 40 different effects.The Preset patches are compatible no...

11 Front and Rear Panel Front Panel fig.0-01 1. PHONES Jack This is the jack for connecting headphones (sold separately). * Use headphones with an impedance of 8 to 150 Ohms. 2. VOLUME Knob This adjusts the volume level for the OUTPUT jack and the PHONES jack. You can also check out a sound using th...

12 Front and Rear Panel Rear Panel fig.0-02 1. AC Adaptor Jack Accepts connection of the supplied AC adapter. 2. Cord Hook To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack, anchor the p...

14 Getting Ready to Play Attaching the Rubber Feet If you will not be using the separately available RAD-50 rack-mount adaptor, attach the rubber feet that were supplied with the JV-1010, as shown in the figure. Use the small holes on the bottom as a guide for positioning the rubber feet when attach...

15 Getting Ready to Play Quick Start Installing a Wave Expansion Board One Wave Expansion Board (SR-JV80 series; sold separately) can be installed in the JV-1010.Waveform data, patches and rhythm sets are stored on the Wave Expansion Board, so you can increase the number of available sounds by insta...

16 Getting Ready to Play Follow the steps below to install the Wave Expansion Board. 1 Before installing the Wave Expansion Board, switch off the power to the JV-1010 and any connected equipment. 2 Detach the cover on the upper portion of the JV-1010. Loosen the four screws on the upper portion of t...

17 Getting Ready to Play Quick Start 5 Use the tool supplied with the Wave Expansion Board to rotate the board holders to LOCK, securing the Wave Expansion Board in place. fig.1-03d.e 6 Use the (specified) screws you removed in step 2 to reattach the cover. This completes the installation of the Wav...

18 Getting Ready to Play Making the Connections The JV-1010 does not have a built-in amp or speakers. In order to produce sound, you need to hook up audio equipment such as a monitor speaker or a stereo set, or use headphones. fig.1-06.e Monitor speakers (powered) Stereo set etc. Power amp Mixer etc...

20 Getting Ready to Play Switching the Power On and Off ■ Switching On the Power 1 Before you switch on the power, check the following. • Are peripheral devices connected correctly?• Is the volume level on the JV-1010 and the connected external equipment turned down all the way? 2 Press the POWER sw...

21 Quick Start Reset to Default Factory Settings (Factory Reset) When using the JV-1010 for the first time, start by returning the settings to their factory defaults so that the JV-1010 operates as described in the procedures in the owner’s manual.This returns all settings stored in memory in the JV...

22 Listening to Demo Songs (Demo Play) The JV-1010 comes with four demonstration songs.Here’s how to start Demo Play, and listen to the outstanding sounds of the JV-1010. Song Name Composer/Copyright All In Good Time Scott Wilkie © 1999 Scott Wilkie Media (ASCAP) Guitars Forever Gundy Keller © 1999 ...

23 Listening to Demo Songs (Demo Play) Quick Start ■ Composer Profiles Scott Wilkie Scott Wilkie is a contemporary jazz recording artist, based in southern California. He tours frequently with his own band, and also appears as an artist for Roland in the U.S., Japan, Europe and South America. His de...

24 Choosing and Playing Patches The JV-1010 comes with a large number of onboard sounds. On the JV-1010, the sounds used for an ordinary performance are called Patches . With the JV-1010, you can use seven groups—User, Preset A through E, and Session—and when a Wave Expansion Board (separately avail...

26 Choosing and Playing Patches Playing Notes from a MIDI Keyboard The JV-1010 receives and plays MIDI data from other instruments. When doing this, the transmitting instrument (the MIDI keyboard or the like) and the JV-1010 must be set to the same MIDI channel. Here we’ll play sounds with both chan...

27 Choosing and Playing Patches Quick Start Choosing Patches When you’ve selected the Patch mode or the Performance mode, after changing the Category and Bank with the CATEGORY/BANK knob, you can choose a patch by turning the VALUE knob.You can use either of two methods to choose a patch: choosing b...

28 Choosing and Playing Patches ■ Choosing Patches by Category Here, let’s choose No. 008 Bright Piano from PIANO (the Piano category). fig.1-17 1 Press the VALUE knob to choose the Patch mode ( PATCH ). Pressing the VALUE knob makes the mode change sequentially. Press the knob several times, until ...

29 Choosing and Playing Patches Quick Start Playing Percussion Sounds The JV-1010 has Rhythm Sets that contain a variety of percussion instruments and special effects sounds.With the JV-1010, you can use seven groups—User, Preset A through E, and Session—and when a Wave Expansion Board (separately a...

30 Choosing and Playing Patches To play rhythm sets using a MIDI keyboard, set the MIDI transmit channel for the MIDI keyboard to 10 . Here’s how you can play percussion instruments using rhythm sets: fig.1-19 1 Set the transmit channel for the MIDI keyboard (the transmitting instrument) to 10 . For...

31 Quick Start Using the JV-1010 as the GM Sound Module The JV-1010 features a GM mode —a convenient way to play back or create GM score data (music files for GM sound module). You’re able to play back commercial GM score data releases and even modify various parameter settings for enhanced musical ...

32 Changing Sounds from an External MIDI Device You can change patches, performances, and rhythm sets by transmitting Bank Select messages (Controller numbers 0 and 32) and Program Change messages to the JV-1010 from an external MIDI device. That is, selecting sounds on an external MIDI keyboard tra...

34 Changing Sounds from an External MIDI Device Changing a Performance When changing a performance, set the transmit channel of the external MIDI device and the Performance Control Channel (Perform Ctrl CH) of the JV-1010 to the same channel, then transmit the Bank Select and Program Change messages...

36 Changing Sounds from an External MIDI Device Changing a Rhythm Set When changing a rhythm set, set the transmit channel of the external MIDI device and the receive channel of part 10 of the performance on the JV-1010 to the same channel, then transmit the Bank Select and Program Change messages. ...

38 Trying Out Desktop Music If you are running music software on your computer, you can use the computer to control the operation of the JV-1010. Of course, this allows you to play back and create song data, switch sounds automatically, and create sounds from the screen. This type of system is know ...

39 Trying Out Desktop Music Quick Start 2 Set the COMPUTER switch on the JV-1010’s rear panel to match the type of computer to be connected as described below. For Apple Macintosh computers: Mac For PCs: PC-2 fig.1-24.e The connection method described in the following step varies according to the ty...

41 Trying Out Desktop Music Quick Start ■ Connecting with MIDI Connectors If you have a MIDI interface (such as Roland’s Super MPU64) connected to your computer or are connecting to a MIDI interface adaptor, you can then connect using the MIDI connectors. 1 Switch off the power to the JV-1010, the c...

42 Trying Out Desktop Music Performing Multiple Parts (Performance Mode) A group of sixteen parts to which fifteen patches and one rhythm set are assigned (fixed at Part 10) is collectively referred to as a Performance . fig.1-28.e In a performance, you can assign each patch and rhythm set to a part...

43 Trying Out Desktop Music Quick Start 1 Press the VALUE knob to choose the Performance mode ( PERFORM ). Pressing the VALUE knob makes the mode change sequentially. Press the knob several times, until the PERFORM indicator lights up. 2 Turn the PART knob and choose 2 . 3 Set the transmit channel o...

44 Editing Using Only the JV-1010 Making Part Settings (PART) fig.1-30 Now try changing the level setting ( Level ) for PART 2 in Performance mode. fig.1-30a 1 Press the VALUE knob to choose the Performance mode ( PERFORM ). Pressing the VALUE knob makes the mode change sequentially. Press the knob ...

45 Editing Using Only the JV-1010 Quick Start 5 Turn the VALUE knob to change the level. This can be set in the range 000 – 127 . Pan , Coarse Tune , and other parameters can be set in the same way. For more detailed information about each parameter and its settings, refer to the Reference Manual th...

46 Editing Using Only the JV-1010 ■ Initializing GM Mode (GM Initialize) Using a computer or sequencer connected to the JV-1010 to play music data bearing the GM logo requires the system be initialized for GM. Carrying out this initialization restores the basic GM settings. fig.1-32 1 Press the VALU...

47 Editing Using Only the JV-1010 Quick Start ■ Initializing the Settings (Initialize) This restores the currently selected performance and rhythm set to standard settings. fig.1-33 1 Press the VALUE knob and choose the Performance mode ( PERFORM ) or the Rhythm Set mode ( RHYTHM ). Pressing the VAL...

49 Editing Using Only the JV-1010 Quick Start Making System Settings (SYSTEM) This sets the tuning and other parameters of the JV-1010’s operating environment. fig.1-35 ■ Selecting the Receive Channel (Perform Ctrl CH) This selects the receive channel when MIDI messages are used to switch performanc...

52 Troubleshooting If no sound is produced, or if operation otherwise seems wrong, first check the following points. If after trying the following remedies, the unit still does not operate correctly, please contact your Roland dealer or the nearest Roland Service Center. * Refer to the “Error Messag...

53 Appendices Error Messages An error message appears in the display when an error in operation occurs, or if an operation cannot be processed correctly. When this occurs, continue by following the instructions indicated in the error message. coE (MIDI Communication Error) fig.coE Situation: There i...

54 Patch List USER (User Group) PR-A (Preset A Group) No. Name Voice Key Assign 001 Tremendously 4 POLY 002 St.Concert 4 POLY 003 CyberTrance2 4 POLY 004 SessionNyln2 3 POLY 005 ViennaStrgs3 4 POLY 006 R&R Brass 3 POLY 007 Velo Power 4 POLY 008 Super Tenor 3 POLY 009 Breathy Humz 2 POLY 010 Ow B...

58 Patch Category List PIANO KEY&ORGAN (Piano Group) (Keyboard & Organ Group) PNO (AC.PIANO)Acoustic Piano No. Name Voice Preset No. 001 St.Concert 4 XP-A:001 002 9ft.Grand 1 4 XP-A:002 003 9ft.Grand 2 4 XP-A:003 004 Euro Classic 2 XP-A:004 005 DEMO Piano1 4 XP-A:231 006 DEMO Piano2 4 XP-A:2...

64 Rhythm Set List 35 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 Note No. 89 91 93 95 90 92 94 96 98 97 C7 USER (User) PR-A (Preset A Group) PR-B (Preset B Group) 001 Ho...

67 Appendices Performance List USER (User Group) PR-A (Preset A Group) PR-B (Preset B Group) No. Name Key Mode 01 EasternSplit LAYER 02 Opening Orch LAYER 03 Feedback EP LAYER 04 Humming Vox LAYER 05 Tekno Loop 1 LAYER 06 Fr.Horn Sect LAYER 07 SpaceCarrier LAYER 08 Orchestral LAYER 09 Nebular Vox LA...

68 MIDI Implementation Model: JV-1010 (64 Voice Synthesizer Module) Version: 1.00 Date: Jan. 28 1999 1. Data Reception ■ Channel Voice Messages ● Note Off status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H n=MIDI channel number: 0H - FH (ch.1 - ch.16) kk=note number: 00H - 7FH (0 - 127) vv=Note Off ve...

88 Function... BasicChannel Mode NoteNumber : Velocity AfterTouch Pitch Bend ControlChange ProgramChange System Exclusive SystemCommon SystemReal Time AuxMessages Notes Transmitted Recognized Remarks DefaultChanged DefaultMessagesAltered True Voice Note OnNote Off Key'sChannel's 0, 32 1245 6, 38 78 ...

89 Appendices Specifications JV-1010: 64 Voice Synthesizer Module (Conforms to General MIDI System) ● Number of Parts 16 (Part 10 is Rhythm Part) ● Maximum Polyphony 64 voices ● Effects EFX: 40 setsReverb: 1 set (8 types)Chorus: 1 set ● Preset Memory Patches: 895 (640 same as the JV-2080 + 255 from ...

90 Computer Cable Wiring Diagrams 6 7 8 3 4 5 1 2 6 7 8 3 4 5 1 2 6 7 8 3 4 5 1 2 mini DIN, 8-pin, male mini DIN, 8-pin, male mini DIN, 8-pin, male D-sub, 25-pin, female mini DIN, 8-pin, male mini DIN, 8-pin, male 1 HSKo2 HSKi3 TXD-4 GND5 RXD-6 TXD+7 GPi8 RXD+ HSKo 1HSKi 2TXD- 3GND 4RXD- 5TXD+ 6GPi ...

91 Index A AC adaptor jack ........................................................ 12, 19 C CATEGORY/BANK knob ............................................ 11Computer cable .............................................................. 40COMPUTER connector ..................................... 12, ...

93 For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in...

94 Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of January 1, 2002 (Roland) ARGENTINA Instrumentos Musicales S.A. Av.Santa Fe 2055 (1123) Buenos AiresARGENTINATEL: (011) 4508-2700 BRAZIL Roland B...