ROBERTS R9974 - Manuals

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 7 Setting the clock 1. The clock will start running when the batteries are installed or when the radio is connected to the mains supply. The display will show " -:--" together with the real time ...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 9 Manual tuning 1. Press the Power button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial and set it a...

10 Search tuning 1. Press the Power button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial and set it at an angle of 45 degrees. 3. Press and hold down either the Tuning up or Tuning down buttons for...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 11 Storing stations in preset memories There are 5 memory presets for each waveband. 1. Press the Power button to turn on the radio. 2. Tune to the required station using one of the methods previously de...

12 Recalling preset stations 1. Press the Power button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band but- ton. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display. 1 2 3

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 13 Setting the radio alarm When the radio alarm is selected the radio will turn on and play the station selected during the alarm set up. The radio alarm will sound for one hour unless turned off by pres...

14 Setting the HWS (Humane Wake System) buzzer alarm A beep tone will sound when using the HWS alarm. The alarm beep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle. The HWS alarm will sound for one hour unless turned off by pressing...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Snooze function 1. W h i l s t t h e a l a r m i s s o u n d i n g p r e s s i n g a n y b u t t o n ( e x c e p t t h e P o w e r b u t t o n ) w i l l a c t i v a t e t h e s n o o z e f u n c t i o...

16 Tuning step size In Europe and other parts of the world MW tuning steps are 9kHz, in America the MW tuning step size is 10kHz. On FM tuning steps can be set to either 50 or 100kHz. 1. Ensure that your radio is switched off. 2. Press and hold down the Step/Band button for 2 sec. The display will s...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Display backlight 1. The display backlight will be switched on for approximately 15 seconds when any button is pressed, during station scanning and when the alarm is operating. Headphone socket 1. A 3...

18 Circuit Features Loudspeaker 75mm 4ohm full range Output Power 800mW Headphone socket 3.5mm dia Aerial System FM Telescopic aerial MW/LW Ferrite Rod Specifi cations Power Requirements Mains (via AC adaptor) AC 230 volts, 50Hz only/DC 6V 400mA Batteries 4 x LR20 (D size) Battery Life Approx. 170 ho...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 19 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure sta...

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during offi ce hours) Website: http://www.robertsradio.co.uk Issue 2