ROBERTS R9969 - Manuals

ROBERTS R9969 – Manual in PDF format online.

Manuals:

Manual

Manual ROBERTS R9969

Summary

Page 2 - Contents

2 Contents ............................................................................ 2 Controls .......................................................................... 3-6 Installing the batteries ...................................................... 7 Switching on and setting the clock ........

Page 3 - CONTROLS; to 9 Numerical buttons

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 3 1 8 10 9 11 12 CONTROLS Controls - Front 1. Light 2. Tune/SSB LED 3. 1 to 9 Numerical buttons 4. Display 5. Band selection 6. Memo AM/PM 7. Mode 8. On/Off Sleep 9. Display button 10. SW Page Clock 1/2 ...

Page 4 - SW External Antenna

4 Controls Right side 20. SSB Fine Tuning 21. SSB On/Off 22. Tone (low/high) 23. Volume Left side 24. SW External Antenna 25. FM/SW DX./Local 26. FM St./FM 27. Headphone socket 28. DC 6 V socket for mains adapter (not supplied) 20 21 22 23 24 25 26 27 28

Page 6 - Map of world time zones

6 Controls Back 31. Map of world time zones 32. Frequency scale 33. Battery compartment 33 32 31

Page 7 - Installing the batteries; Close the battery compartment cover.

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 7 Installing the batteries 4 x 1.5V, LR6 (AA size) type batteries are required. 1. Open the battery compartment on the back of your receiver bypressing the marking and opening the lid. 2. Insert the batt...

Page 8 - Display button

Switching on and setting the clock Before setting the clock make sure that the local time zone is known.There are 24 time zones based on a standard time zone called the UTC(Universal Time Co-ordinated), previously known as GMT (GreenwichMean Time), as shown in the diagram on the back of the receiver...

Page 9 - Setting local time 2; SW Page Clock 1/2 button

Setting local time 2 1. Press the SW Page Clock 1/2 button . The display flashes for local time '2' . 2. To set the display to local time '2' press the Freq./Clock button . 3. Press down and hold the Freq./Clock button until the display indicates the time can be set. The digital display will show '-...

Page 10 - Setting and storing radio stations; Band button; Tuning radio stations directly

10 Setting and storing radio stations 1. Switch on the radio by pressing the On/Off Sleep button . 2. Press the Band button to select the required waveband (FM, SW, MW or LW). There are various ways to set radio stations and store them at presetpositions. 3. If short wave is selected, the frequency ...

Page 12 - Saving radio stations at preset positions; SW

12 Saving radio stations at preset positions You can store up to 45 radio stations; 18 on two memory levels for shortwave frequencies, and nine each on FM, MW and LW frequencies. 1. Select the frequency band and the radio station. 2. Press the Memo AM/PM button . 3. Press the Freq./Clock button to s...

Page 13 - Automatic station search; Arrow buttons; Deleting preset stations; C Memo Del button

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 13 Automatic station search This function allows an automatic search and store of nine stations ineach of the FM, MW and LW bands (not SW). The search starts at thelowest frequency in the selected wave b...

Page 14 - Calling up stored radio stations; Page Clock 1/2 button; Checking stored radio stations; Memo Scan button

14 1 Calling up stored radio stations 1. Select the station using the numerical buttons '1...0' for the preset number. 2. To call up preset numbers 10 to 18 in the SW band, press the SW Page Clock 1/2 button to switch to the second memory level. Note: For FM reception, pull out the telescopic antenn...

Page 15 - Volume; Adjusting the tone

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Changing preset positions 1. Enter the preset station you want to change using the numericalbuttons '1...0'. 2. Press the Memo AM/PM button and the selected preset position flashes. 3. Enter the new p...

Page 16 - Listening with Headphones; Headphone Socket; Switching between stereo and mono reception; FM; Setting the reception sensitivity; Local

16 Listening with Headphones 1. A Headphone Socket (3.5mm) located on left side of the receiver is provided for use with either headphones or an earpiece. Insertinga plug automatically mutes the internal loudspeaker. Switching between stereo and mono reception FM stereo reception is only available w...

Page 17 - Insert the plug of the antenna cable into the; SW External Antenna; socket on the left hand side of the receiver.

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Special features of SW reception Short wave reception Your radio can receive signals in a number of frequency bands. It is easyto get used to tuning to stations in the FM, MW and LW bands, since theya...

Page 18 - SSB reception (for example for radio hams and shipping); Fine Tuning Dial

18 SSB reception (for example for radio hams and shipping) Some short wave stations broadcast Morse code for shipping usingcontinuous waves (CW). Voice signals, for example amateur radio, isnormally broadcast on the single side band (SSB). 1. Select the SW waveband using the Band button. 2. Select t...

Page 19 - Alarm with signal tone; Alarm button

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 19 Alarm mode Displaying the alarm time 1. Press the appropriate Alarm button (signal tone or radio). The last setting will be displayed or the radio symbol will flash. Note: The display will return to t...

Page 20 - Alarm with radio station; On/Off Sleep button

20 Alarm with radio station 1. Press the On/Off Sleep button to switch on the receiver. 2. Select the frequency band and the radio station. 3. Adjust the alarm volume using the Volume dial. 4. Press the Display button to switch the display to the clock. 5. Press the Alarm button (radio station). The...

Page 21 - Sleep timer mode; button

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 21 Cancelling the alarm for the day 1. Press the On/Off Sleep button while the alarm is sounding. The alarm (signal tone or radio) stops, but the alarm function remainsactivated for the next day at the s...

Page 22 - Deactivating the sleep timer; Additional functions

22 Deactivating the sleep timer 1. To deactivate the sleep timer, press the On/Off Sleep button to switch off the radio. Additional functions Displaying local time 1 or 2 If two local times are set, local time '1' is normally displayed. 1. To temporarily change from local time '1' to local time '2' ...

Page 23 - Setting various function modes; C o d e Function; Mode button

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 23 Setting various function modes Using the Mode button and a two-digit code, which you enter using the numerical buttons '1---0', you can change various functions: C o d e Function C o d e Function MODE...

Page 24 - Switching on the back lighting for the display; Light button; Disabling and enabling the buttons; Lock button; Disabling and enabling the fine tuning dial; Tuning Lock button

24 Switching on the back lighting for the display 1. Press the Light button to switch on the display lighting for 7 seconds. 2. Press the Light button to switch off the display lighting. Disabling and enabling the buttons 1. To disable the buttons, move the Lock button to the red dot. 2. To enable t...

Page 25 - Deleting all settings; Press the

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 25 Deleting all settings The receiver can be reset to its original state. All settings are lost whenyou do this. 1. Press the Reset button on the bottom of the device using a suitable implement such as a...

Page 26 - Specifications; Power supply

26 Specifications Power supply Battery operation 4 x 1.5V LR6 (AA size) Mains operation 6V (200 mA) mains adapter, DC Output 300 mW 10% THD A n t e n n a s Telescopic antenna FM and SW Ferrite rod antenna MW and LW S o c k e t s DC socket Dia. 4.0 mm, 6V (200 mA) centre pin negative Headphone jack D...

Page 27 - Guarantee; The guarantee does not cover:

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 27 Guarantee This receiver is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or componentbreakdown, subject to the procedure stated...

Page 28 - ROBERTS RADIO TECHNICAL SERVICES; Isleworth Middlesex; Issue 1

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1