ROBERTS CRD-33 - Manuals

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Operation modes Your radio has 4 operation modes, DAB, FM, Playlist mode and Auxiliary input. 1. Press the Band button to change the operation mode between DAB, FM, Playlist and Auxiliary input mode. • D...

Operating your radio - DAB 1. Place the wire antenna so that it is as straight as possible extending either above or below the radio. The FM/DAB wire antenna is beneath the removable cover plate. 2. Insert the adaptor plug into the DC socket located on the rear of your radio. 3. Plug the adaptor int...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Selecting a station - DAB 1. Place the wire antenna so that it is as straight as possible extending either above or below the radio. 2. Press the Standby button to switch on your radio. 3. During the ...

Presetting stations - DAB and FM There are 10 memory presets on each radio band, DAB and FM. 1. Press the Standby button to switch on the radio. 2. Tune to the required station as previously described. 3. Press and hold down the required Preset button until the display shows for example, "Preset...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Recalling a preset station - DAB and FM 1. Press the Standby button to switch on your radio. 2. Select the required waveband by pressing the Band button . 3. Momentarily press the required Preset butt...

Finding new stations - DAB As time passes new stations may become available. To fi nd new stations proceed as follows:- 1. Press and release the Auto Tune button , the display will show "Quick scan". Your radio will perform a scan of the UK DAB frequencies. As new stations are found the stati...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 14 Secondary services - DAB 1. Certain radio stations have one or more secondary services associ- ated with them. If a station has a secondary service associated with it the display will show ">&g...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Using your radio's PausePlus feature - DAB How many times has your favourite radio station been interrupted by that phone call from a double glazing fi rm or someone selling that must have item? Sound ...

17 PausePlus Rewind and Fastforward - DAB 1. Repeatedly press the Fastforward or Rewind buttons to scroll to the item you wish to listen to. Each press moves forwards or backwards 30 seconds. 2. When using your radio's feature the top line of display automatically switches to show the time that you ...

19 Station order setup - DAB Your radio has 3 station order settings from which you can choose. The station order settings are, favourite station, alphanumeric and active station. Note: Your radio default station order is alphanumeric. 1. Press and hold in the Info button until "Station order...

21 Operating your radio - Search tuning FM 1. Place the wire antenna so that it is as straight as possible extending either above or below the radio. 2. Press the Standby button to switch on your radio. 3. Press the Band button to select the FM band. 4. Press and immediately release the Auto tune bu...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 24 Using an SD memory card with your radio An SD card can be used in your radio for recording, playing back previously recorded radio programs, or playing back MP2 and MP3 fi les transferred from a PC. De...

25 3. Press the Preset 4/Stop button to stop recording. The recording will be saved on your SD card. If your radio is not recording correctly check the following: - The card is the correct format (reformat as described below). - The card has enough recording space available. (page 26) - The card has...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 26 3. Press and release the Select button . 4. Press the Tuning Up/Down button until "Format" appears on the lower line display. 5. Press and release the Select button "Confi rm format / No...

27 File playback The playlist mode displays the fi les on the current memory card. The display will show the current fi le details. 1. Ensure your SD card is inserted correctly. 2. Press the Band button until the Play list mode is selected. "Finding tracks" will be displayed then the current r...

29 Delete fi les 1. In DAB mode press and hold in the Info button and press the Tuning Up/Down button until "Memory Card" is shown on display. If in FM or Playlist mode simply press and hold the Info button and "Memory Card" will show on the display. 2. Press and release the Select bu...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 32 14. The alarm has now been set and the radio will revert to the previous time or radio display. Note: When the alarm is set to wake by radio, the last used station will be switched on at the alarm tim...

33 To cancel the alarm 1. Whilst an alarm is sounding it can be cancelled for 24 hours by pressing the Standby button . The alarm will then be rescheduled as needed according to its settings. Note: Pressing the Standby button once during a radio alarm cancels the alarm but allows the radio to contin...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 34 Sleep function Your clock radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted between 15 and 120 minutes. 1. To set the desired sleep time, press the Sleep ...

35 Nap timer The Nap timer facility allows you to set the radio to wake you after a pre-determined interval (up to 1 hours) without needing to set the alarms. 1. Press and hold the Nap button , the current nap time will fl ash. 2. Repeatedly press and release Tuning Up or Down buttons to choose the r...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) FM Stereo/Mono 1. If a station being received is weak some hiss may be audible. To re- duce the hiss press and release in the Select button until the display shows "Mono" your radio will switch t...

Signal strength display - DAB 1. Press and release the Info button until the lower line of the display shows the signal strength. 2. Position your radio and carefully angle the telescopic aerial for best reception using the signal strength display as a guide. Move your radio around and position to g...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) System reset If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure. 1. Switch on your radio. 2. Press and hold in the Info bu...

39 Setting the clock manually If you are unable to receive DAB broadcasts, the clock may be setmanually using the following procedure. Note that the radio may be onor in standby mode when setting the time manually. 1. Press and hold the Time Set/Sleep button . “< > or SELECT” will appear on th...

41 Auxiliary in socket 1. Connect a stereo or mono audio source (ie CD player, iPod, MP3 player) to the Auxiliary in socket . 2. Press the Band button to select AUX band. "AUX IN" will show on the display. 3. Adjust the Volume control for comfortable listening. Line out socket A 3.5mm Line o...

Backlight for clock and display When you fi rst plug it in your clock radio sets the clock and display back-light to maximum brightness. The backlight button can be used to switch between this and a lower level of illumination which is set using the small adjustment wheel on the underside of the radi...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) General Do not allow this radio to be exposed to water, steam or sand. Do not leave your radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up eve...

Specifi cations Power Requirements AC adaptor AC 230 volts, 50Hz only Frequency Coverage DAB 174.928 - 239.200MHz FM 87.50 - 108 MHz Circuit features Loudspeaker 10 x 7.5cm elliptical Output Power 800 mW Headphone socket 3.5mm dia Aux in socket 3.5mm dia Line out 3.5mm dia Aerial System DAB and FM Wi...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated...

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during offi ce hours) Website: http://www.robertsradio.co.uk Issue 1