ROBERTS cr9980 - Manuals

8 Setting the time and date Note: When the unit is set to CD mode or radio you cannot set the timeand date. 1. Press and hold the Time Set button for 2 seconds. 2. The clock display will change to show the time setting icon andthe minutes will flash. 3. Press the Tuning Up and Tuning Down buttons to...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 9 8 9 9 10 Setting the time and date (continued) 8. Press the Time Set button a fourth time. The month will flash in theclock display. 9. Press the Tuning Up or Tuning Down buttons to increase ordecrease...

10 Listening to the Radio 1. Switch on your radio by pressing the Radio On button. 2. The backlight will change from green to orange. The radio icon andthe station frequency will show in the display. After approximately 10seconds the display will revert back to showing the time. 3. The current waveb...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 11 Storing stations in memory 1. Tune in the radio to the required station. 2. Press the Memory button. The Memory indicator will flash on thedisplay. 3. Select the required memory position by using the ...

12 Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CDat the edge and store it in its case after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft,lint-free cloth in a s...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 13 Inserting a CD 1. To open the CD compartment, lift the CD door on the edge marked'Open'. 2. Press the CD onto the spindle and close the CD door. 3. Press the Play/Pause button to enter the CD standby ...

14 Playing a CD 1. Press the Play/Pause button to start playback. The display will showthe time elapsed for the current track. The track number will show onthe right side of the display. After a few seconds the display will revert back to clock time. 2. Adjust the volume to the required level by rot...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Selecting a track Use this function to select a track on the CD. 1. Whilst the CD is playing, press either the F.skip/Mem. Up or B.skip/Mem. Down buttons to change to the desired track. You can alsosk...

16 CD repeat mode Use this function to repeat a single track or repeat the entire CD. 1. Whilst the CD is playing press the Repeat button once to repeat thecurrent track. The repeat track icon will appear and the selectedtrack will be repeated indefinitely. 2. Press the Repeat button again to repeat...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Programmed play Use this function to programme the player to play selected tracks on theCD in the order that you want to hear them played. A maximum of 21tracks can be programme. Note: You cannot prog...

18 1 1 Erasing a programme 1. Programmes are erased by pressing the Stop/Off button, orinterrupting the mains supply. Setting Alarm Times Your unit has three separate alarms (Alarm 1, Alarm 2 and Alarm 3) thatcan be set and used independently and can be set to wake you with theradio, the CD player o...

20 10 9 Setting alarm times (continued) 9. Press the Wake button as necessary to set the alarm day options.The display will show the applicable numbers as shown below for thesetting selected: 1 - 5 Monday through Friday 1 - 6 Monday through Saturday 1 - 7 Every day 6 - 7 Saturday and Sunday only 7 -...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 21 Setting alarm times (continued) 11. At the time that the alarm is set to go off: - The Radio will switch on and play for 60 minutes (if set to the Radiomode). - The CD will switch on and play for 60 m...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 23 Sleep timer 1. CD or radio playback can be set to switch off automatically after apreset time has elapsed. With the unit in either CD or radio mode,press the Sleep button. The display will show '90' m...

The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back up Batteries 2 x LR6 (AA Size) alkaline Frequency Coverage FM 87.5 - 108MHz MW 522 - 1629kHz Circuit Features Loudspeakers 8 ohms Output power 2 x 500 mW Aer...

26 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug(BS1363). If another type of plug is used a 5A fuse should be fitted in theplug, adaptor or distribution board. IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN. Back-up Battery (not necessary for the unit to function) Slide th...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 27 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or componentbreakdown, subject to the procedure stat...

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 2 cr9980 instruction book1.PMD 1/14/2005, 12:36 PM 28