ROBERTS CR9937 - Manuals

Display backlight During automatic setup and radio text, the display backlight will remainon. The display back light will be switched on for 10 seconds wheneverany button is pressed. The display backlight can also be set to remain on at 3 different levels,dim, bright and off. 1. Press the Light butt...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 8 Automatic Plug and Play setup When your Clock Radio is first connected to the mains supply, or aftera power failure (when backup battery is not installed), the Auto setupwill proceed as follows:- • Your...

Setting the Clock Automatically The clock time and day of week can be set automatically when recievingan RDS radio station that transmits clock time (CT). The CT informationis transmitted once every minute. If the signal has sufficient signalstrength the clock will set within one to two minutes. 1. ...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) Setting the clock/day of week manually 1. Ensure that the radio is switched off (press StandBy). 2. Press and hold down the Time button until the hour digit flashes. 3. Press the Tuning Up/Down buttons to...

Setting the alarm times The alarms can be set to wake you by a buzzer, CD or the radio. YourCD clock radio has 2 separate alarms which can be set to activate atdifferent times. Setting the alarms to wake to buzzer 1. Ensure that the radio is switched off (press StandBy). 2. Press and hold down the A...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 12 Setting the alarms to wake to radio 1. Ensure that the radio is switched off (press StandBy). 2. Press and hold down the Alarm 1 or Alarm 2 button until the hour digit flashes. 3. Press the Tuning Up/D...

13 Setting the alarms to wake to CD 1. Ensure that the radio is switched off (press StandBy). 2. Press and hold down the Alarm 1 or Alarm 2 button until the hour digit flashes. 3. Press the Tuning Up/Down buttons to set the correct hour. 4. Press the applicable Alarm button (1 or 2) to confirm. The ...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) Displaying the alarm time and alarm mode 1. Press either the Alarm 1 or Alarm 2 buttons ; the alarm time and alarm mode will be displayed. Weekend alarm cancel Your clock radio can be set to automatically...

Snooze control 1. The radio, buzzer, or CD alarm, can be silenced for 5 minutes by pressing the Snooze button . This sequence can be repeated during the 90 minutes alarm period. Sleep timer CD or radio playback can be set to switch off automatically after a presettime has elapsed.1. Repeatedly press...

19 Recalling a preset station 1. Switch on your radio using the BAND button on the CD clock radio or the BAND button on the remote control. 2. Select the desired waveband using the BAND button on the CD clock radio or the BAND button on the remote control. 3. Press one of the up or down buttons on t...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) Radio Data System ( RDS ) The R adio D ata S ystem ( RDS ) is a system in which inaudible digital information is transmitted in addition to the normal FM radio programme. RDS offers several useful feature...

Operating your radio using RDS (Radio data system) 1. Switch on your radio and select the FM waveband.2. Tune into a station; the display will indicate frequency for two seconds and then change to show the station name. The symbol will appear in the display. 3. If the station does not carry RDS info...

Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CDat the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft, lint-free cloth in a stra...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 24 Inserting a CD 1. To switch on your CD clock radio, press the Play/Pause button on either the clock radio or the remote control. 2. To open the CD compartment, lift the CD door on the rear edge as s h ...

25 Playing a CD 1. Press the CD Play/Pause button to start playback. The display will show '01' and the elapsed playing time. 2. Whilst the CD is playing, press either the F.Skip or B.Skip buttons to change to the desired track, the track number appears in thedisplay. 3. You can also skip tracks whe...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) Selecting a track 1. Whilst the CD is playing, press either the F.Skip or B.Skip buttons to change to the desired track. You can also skip tracks when theplayer is in stop mode. Skip to the desired track ...

CD repeat mode 1. Whilst the CD is playing press the Intro/Repeat button once to repeat the current track. The indicator will appear in the display. 2. Press the Intro/Repeat button again to repeat all tracks on the CD. The indicator will appear in the display. 3. Press the Intro/Repeat button again...

Programmed play By programming the player you can play up to 24 tracks in any desiredorder.1. Whilst the CD is in STOP mode, press the Prog/Random button . The display will show ‘P 01’. 2. Select the first track using the F.Skip or B.Skip buttons . The track number will flash on the display. Store t...

Checking and Editing a programme 1. Whilst the CD is in STOP mode, press the Prog/Random button . The display will show ‘P 01’. Press either the F.Skip or B.Skip buttons , the display will show the programmed track. 2. The programme can be edited by pressing either the F.Skip or B.Skip buttons until...

Erasing a programme This can be done in one of three ways, as detailed below. 1. While programming, press the Stop button . 2. Whilst the programme is playing, press the StandBy button . 3. Whilst the programme is playing, press the BAND button on the CD clock radio or the BAND button on the remote ...

31 The Company reserves the right to amend the specification without notice. Specifications P o w e r R e q u i r e m e n t s Mains 230 volts, 50Hz AC only Back-up Batteries 2 x LR6 (AA size) Remote Batteries 2 x LR03 (AAA size) Frequency Coverage FM 87.5 - 108MHz MW 522 - 1620kHz Circuit Features L...

Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or componentbreakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or repl...

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1