ROBERTS CR9923 - Manuals - manualsarea.com

Page 2 - SNOOZE

TIME SLEEP ALARM / OFF Minute Hour SNOOZE 1 1. Alarm set/off button. 2. Sleep button. 3. Minute button. 4. Hour button. 5. Time set button. 6. Snooze. Controls (top) 1 2 3 5 4 6

Page 4 - Battery compartment

9 10 9. Function switch. 10. Dimmer switch. 11. Waveband switch. 12. Volume control. 13. Battery compartment Controls (left and right side) 3 Low High OnOff Radio Buzz DIMMER MW FM VOLUME 11 12 13

Page 5 - TIME

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) Switching on 1. Place your clock radio on a flat surface. Plug the power cord into the wall socket and switch on. The clock display will flash 12.00. Setting the time 1. Press and hold down the TIME butto...

Page 6 - Listening to the Radio

5 Listening to the Radio 1. Switch on the radio by sliding the Function switch to the 'On' position. 2. Select the required waveband using the Waveband selector switch . 3. Tune in to the desired station by rotating the Tuning control . The Wire aerial located on the rear of your clock radio is for ...

Page 7 - Setting alarm time; Checking the alarm time; button

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 6 Setting alarm time 1. Press and hold down the ALARM/OFF button . 2. Whilst holding down the ALARM/OFF button press the Hour or Minute buttons to set the time. Release the buttons when the correct alarm ...

Page 8 - Setting the alarm to wake to buzzer; Setting the alarm to wake to radio; Set the alarm time as previously described. Set the

7 Setting the alarm to wake to buzzer 1. Set the alarm time as previously described. Set the Function switch to the 'Buzz' position. The Alarm indicator will light. The alarm will sound every day at the preset time for 1 hour 59minutes. To switch off the alarm until the next day press the ALARM/ OFF...

Page 9 - SLEEP

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 8 Snooze control 1. The radio or buzzer alarm can be silenced for 9 minutes by pressing the SNOOZE button. This sequence can be repeated whilst the alarm is sounding. Sleep timer The radio can be set to t...

Page 10 - Dimmer Switch; DIMMER switch; Specifications; Power Requirements; Circuit Features; ROBERTS RADIO LIMITED; MEXBOROUGH

9 Dimmer Switch The DIMMER switch located on the left side of your clock radio will allow you to adjust the intensity of the clock display to suit roombrightness. Low High DIMMER Specifications Power Requirements Mains : AC 230 volts, 50Hz only Back-up Battery : IEC size 6LR61 (6F22, PP3) Frequency ...

Page 11 - Fuse; Brown; General

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 10 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug(BS1363). If another type of plug is used a 5A fuse should be fitted in theplug, adaptor or distribution board. IF IN DOUBT - CO...

Page 12 - ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT; Isleworth Middlesex; The guarantee does not cover:; Guarantee; These statements do not affect the statutory rights of a consumer.

Issue 1 ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) This clock radio is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmansh...