ROBERTS Classic DAB - Manuals

Using the AC adaptor 1. Place your radio on a fl at surface and plug the mains adaptor into the DC input socket located on the left hand side of your radio (marked 'DC') ensuring that the plug is pushed fully into the socket. 2. Plug the other end of the mains adaptor into a standard 13A mains socke...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 6 Operating your radio - DAB 1. Carefully extend the telescopic aerial. 2. Press the On/Off button to switch on your radio, the display will show 'WELCOME' for a few seconds. After each use the radio will...

7 Selecting a station - DAB 1. Press the On/Off button to switch on your radio. If your radio is currently in DAB mode proceed to step 3. (DAB icon is displayed in DAB mode.) 2. If you are listening in FM mode press the Station/Menu button and then rotate the Tuning/Select control until 'TO DAB' sho...

9 Finding new stations - DAB As time passes new stations may become available or you may have moved to a different part of the country. In this case you may need to cause your radio to scan for new stations.1. Press and release the Auto Tune button . Your radio will perform a scan of the Band III DA...

13 Operating your radio - FM 1. Carefully extend the telescopic aerial. 2. Press the On/Off button to switch on your radio. If your radio is currently in FM mode proceed to step 4. (FM icon is displayed in FM mode.) 3. If you were listening in DAB mode press the Station/Menu button and then rotate t...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 16 Scan sensitivity setting - FM Your radio will normally scan for FM broadcasts which are strong enough to give good reception. However, you may wish the Auto-scan function to also be able to fi nd weake...

17 Presetting stations You may store your preferred DAB and FM radio stations to the preset station memories. There are 20 memory presets in your radio, 10 for DAB and 10 for FM. Presets are remembered by your radio in the event of a power failure. The procedure for setting presets and using them to...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 18 Recalling a preset station 1. Press the On/Off button to switch on the radio. 2. Select the required waveband as previously described. 3. Press and release the Preset button. The display will show, for...

19 Software version The software display cannot be altered and is just for your reference. 1. Press the On/Off button to switch on the radio. 2. Press and release the Station/Menu button and then rotate the Tuning/ Select control until 'SYSTEM' appears on the display. 3. Press the Tuning/Select cont...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 20 System reset If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure. 1. Press the On/Off button to switch on the radio. 2. P...

21 Headphone socket A 3.5mm Headphone Socket located on the right hand side of your radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker. IMPORTANT: Excessive sound pressure from earphones and headphones can cause hearing loss...

If you need any further advice, please call our Technical Helpline on :-020 8758 0338 (Mon-Fri) 22 Circuit Features Loudspeaker 76mm Headphone socket 3.5mm dia Output Power 700mW Aerial System FM Telescopic aerial DAB Telescopic aerial Speci fi cations Power Requirements Mains AC 230 volts, 50Hz onl...

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during of fi ce hours) Website: http://www.robertsradio.co.uk © 2010 Roberts Radio Limited Issue 1 Guarantee This instrument is guaranteed for twelve months from the date of de...