Ricoh WX4130n - Manuals

Manuals Provided with the Projector Manuals for the Projector Read this manual carefully before you use the projector.Refer to the manuals that are relevant to what you want to do with the projector. • The manuals are provided in various formats.• Adobe ® Acrobat ® Reader ® /Adobe Reader must be ins...

Viewing the PDF Manual on the CD-ROM This section describes how to view the PDF manual on the supplied manual CD-ROM. File path The manual is included in the following folder on the CD-ROM:Manual\(language) 1. Insert the CD-ROM in the CD-ROM drive of your computer. 2. Specify a language. The launche...

How to Read This Manual Symbols This manual uses the following symbols: Indicates points to pay attention to when using the projector. Indicates supplementary explanations of the projector’s functions, and instructions on resolving usererrors. [ ] Indicates the names of buttons on the control panel ...

1. Preparations for Using the Projector This chapter explains the names and functions of the different parts of the projector and remote control,and how to use them. It also explains how to position the projector and how to connect it to otherequipment. Main Functions The projector features the foll...

Checking the Accessories The projector is provided with the following accessories. Make sure that everything is included in thepackage.If anything is missing or damaged, contact your sales representative or service representative. Remote controlAAA battery LR03 (2 ea) RGB cable (3 m) Power cord Mous...

6. Arrow buttons Used to operate the menu screen. The [ ] and [ ] buttons are used to adjust the size of the projected image.The [ ] and [ ] buttons are used to adjust the volume. 7. Projection window Enlarges and projects the image (light). • The top of the projector is covered with a protective fi...

Rear and Right-Side View 9 8 7 6 5 4 3 2 1 CLB011 1. USB port For connecting a USB memory device or USB device cable. 2. HDMI port For connecting an HDMI (High-Definition Multimedia Interface) cable. 3. LAN port For connecting an Ethernet cable. 4. Computer In port (Y/Pb/Pr) For inputting RGB signal...

Remote Control Parts and Their Functions 6 1 2 8 7 13 19 18 12 4 5 10 11 9 3 21 22 23 24 25 15 16 17 20 14 CLB013 1. [Menu] button Displays the menu screen. Press it again to close the menu screen. 2. [Input] button Switches the signal input. The signal that is input changes each time the button is ...

How to Use the Remote Control You can use the remote control to turn the projector on and off, and to change the signal of the imagebeing input and projected. You can also enlarge or reduce the image and mute the audio.Note the following precautions when using the remote control: • Do not drop or hi...

Loading Batteries into the Remote Control • For safe operation, follow the warnings below regarding the batteries used in the remote control. If you use the batteries incorrectly, it may result in fire or injury due to batteries leakingor exploding. • Do not use batteries other than the ones specifi...

2. Insert the batteries. CLB016 Note the direction of the positive and negative terminals when inserting the batteries. 3. Close the battery cover. CLB017 • Replace the batteries if the remote control does not work or if the effective distance becomes too narrow. Inputting Text Use the keyboard that...

2. Press the [Enter] button. The selected character appears in the text area. 3. After inputting all the characters, select [OK]. 4. Press the [Enter] button. The text is input. • You can also use the number buttons on the remote control to input numbers. Operating a Computer with the Remote Control...

2. [Enter] button Left clicks. 3. [R-Click] button Right clicks. 4. [Page] button The [ ] and [ ] buttons change the pages in a PowerPoint presentation. 1. Connect the mouse remote control receiver to the computer. 2. Point the remote control at the mouse remote control receiver and press the button...

Positioning the Projector When positioning the projector, place it so that the projector's rear side faces the screen. Make sure theprojector and the screen are parallel to each other.Adjust the distance between the projector and the screen according to the size of the projected image.For details, s...

Connecting Equipment to the Projector • Do not place the power cord and connection cable in a way that might cause someone to trip and fall. The product might fall over and cause an injury. Various equipments can be connected to the projector.Turn off the power to any equipment before connecting it ...

Connecting AV Equipment Use a cable that supports the signal being input when connecting AV equipment.To connect a DVD recorder, connect a conversion adapter BNC-pin to the Computer In port of theprojector and to the Y/Pb/Pr output of the recorder.To connect a video recorder or a DVD player, connect...

Connecting the Power Cord • Do not use any power sources other than those that match the specifications shown. Doing so could result in fire or electric shock. • Do not use any frequencies other than those that match the specifications shown. Doing so could result in fire or electric shock. • The su...

2. Projecting an Image This chapter explains the procedure for projecting an image. Basic Operations • Do not look into the projection window or vent when the product is on. The bright light may damage your eyes. Be especially careful in an environment with children. • Do not place low heat resistan...

Turning On the Projector Make sure that the power plug is inserted into a power outlet. For details, see p.30 "Connecting thePower Cord". 1. Press the [Power] button. CLB030 The projector beeps and the indicator flashes blue.The start-up screen is displayed. • Make sure the projector is posi...

• The start menu is only displayed the first time the projector is used. However, the start menu is displayed when the projector is turned on after [Reset All] in [Default Settings] is executed. • The display language and lamp power level can also be changed in the menu screen. For details, see p.90...

When projecting the screen of a notebook computer When connecting a notebook computer to the projector, switch the computer's image output.In Windows operating systems, the image output can be switched with a function key. While pressingand holding the [Fn] key, press the key, the key, or the LCD/VG...

1. Lift the front of the projector and adjust the length of the adjustable feet. CLB031 Turn the adjustable feet to the left to make it longer. Turn the adjustable feet to the right to make itshorter. • Adjust the height of the right and left adjustable feet so the projector is level. If the project...

1. Press the [Zoom ] button to reduce the image. CLB037 The ratio decreases each time the [ ] button is pressed. You can confirm the current ratio on thevalue bar at the bottom of the screen. 2. Press the [Zoom ] button to enlarge the image. The ratio increases each time the [ ] button is pressed. T...

Adjusting for keystone distortion If the projector is placed at an angle, the projected image will be distorted. This is called keystonedistortion.If [Auto Keystone] in [Default Settings] is specified as [Off], manually adjust for keystone distortion. CLB033 1. Press the [Keystone ] and [Keystone ] ...

1. Press the [Auto set] button. CLB034 • Depending on the type of input signal, some images may not be displayed or correctly adjusted. If this happens, adjust the image with [Position] in [Image Adjustment]. For details about the types ofsignals that can be input to the projector, see p.127 "Li...

1. Press the [AV Mute] button. CLB038 The image blanks and the audio mutes. 2. To cancel this function, press the [AV Mute] button again. • An icon appears on the screen when mute is used.• The mute function is canceled automatically if any button on the control panel is pressed.• You can also use t...

• You can also change the aspect with [Display Settings]. For items that can be specified, see p.87 "Display Settings Menu". Switching the lamp mode Select eco mode if the image is too bright or when projecting images in a dark room. 1. Press the [Eco] button. CLB042 The mode changes each ti...

Connecting the USB Device Connect the USB memory device or digital camera to the projector.The USB device can be connected even if the projector is already on. 1. Connect the USB device to the USB port on the projector. Check the port orientation before connecting. CLB043 • If the projector does not...

1. Press the [USB] button. CLB044 The input signal switches to the USB, and the files within the root directory are displayed. 2. Use the [ ] and [ ] buttons to select the JPEG file or folder. 3. Press the [Enter] button. If you select a JPEG file, its image is projected. If you select a folder, the...

1. Press the [USB] button. CLB044 The input signal switches to the USB, and the files within the root directory are displayed. 2. Use the [ ] and [ ] buttons to select the MPEG file or folder. 3. Press the [Enter] button. If you select an MPEG file, the video plays. If you select a folder, the file ...

You can do presentations without a computer if you save converted JPEG files to a USB memory deviceand then display the slides using the projector.The converted files can also be transferred to a server. Operating Environment • Supported operating system Windows XP (32-bit version) Professional Edit...

How to use JPEG Conversion Tool JPEG Conversion Tool is included on the supplied CD-ROM. 1. Insert the CD-ROM in the CD-ROM drive of your computer. 2. Specify a language. The launcher screen appears. 3. Click [JPEG Conversion Tool Type A]. 4. Specify a destination to save the application. The "R...

3. Using the Projector via a Network This chapter explains the settings for using the projector via a network. This chapter also explains theoperations that use Network Utility. Connecting the Projector to a Network The projector can be connected to a network using a wireless LAN or an Ethernet cabl...

Connecting Using a Wireless LAN • Do not use a wireless LAN if there is electromagnetic interference from other equipment. Doing so may cause an accident due to the other equipment malfunctioning from the electromagneticinterference. The projector has a built-in wireless LAN board.Wireless uses radi...

Ad Hoc mode This mode communicates with the computer directly, and not via an access point. No other equipment isrequired, so this mode is suited for locations that have no network environment.If you use ad hoc mode, make the following settings: Settings Using Simple 1:1 Connection Action Method Ref...

Settings Using Simple Wireless LAN Setup Action Method Refer to Wireless LAN settings Simple Wireless LAN Setup p.59 "SimpleWireless LAN Setup" Image projection Network Connection (Network Utility) p.63 "NetworkConnection" Simple Wireless LAN Setup To use the projector via a wireless...

3. Select [Network Settings]. 4. Select [Wireless LAN]. 5. Select either [Connect by PIN] or [Connect by Push] in [Simple Wireless LAN Setup]. 6. If [Connect by PIN] is selected, enter the PIN code generated by the access point in theprojector, and then proceed to step 7. You must preconfigure the a...

Projecting Images Using Network Utility What Is Network Utility? Network Utility is a software application that connects the projector and a computer to project images.Images that can be projected are computer screens and still images.The main Network Utility functions are described below: Simple 1:...

1. Insert the CD-ROM in the CD-ROM drive of your computer. 2. Specify a language. The launcher screen appears. 3. Click [PJ Network Utility Type A]. 4. Specify a destination to save the application. The "RICOH PJ NetworkUtility Type A" folder is copied to the computer. 5. To create a shortcu...

4. Double-click the "Network Utility" icon on the computer. Network Utility starts. 5. Click the [Simple 1:1 Connection] tab. 6. Select the projection method. 7. If you select [Transmit Still Image File], specify the file to be projected. 8. Click [Start]. A number appears on both the projec...

5. Select the connected projector from [Select Projector(s) to Use (Up to 4 devices):]. If you want to manually enter the projector IP address, select [Connect by Manual Entry], and enterthe IP address. 6. Select the projection method. 7. If you select [Transmit Still Image File], specify the file t...

8. Press the [Network] button. CLB074 9. Insert the USB memory device into the USB port on the projector. The confirmation screen is displayed. 10. Select [OK]. The wireless LAN settings saved to the USB memory device are reflected in the projector. 11. Select [OK]. • If the conformation screen does...

Using the Projection Server Function The projector accesses the network server to project JPEG files saved on the server.You do not need to carry a storage device or computer that has the files to be used. Therefore, it is usefulto protect information.Accessing folders on the server can be controlle...

Registering a URL rewrite rule Using a URL rewrite module, register a rule to rewrite "original characters" to "rewritten characters": • Original characters: ^alias name of the virtual directory/(.*)• Rewritten characters: /alias name of the virtual directory/name of the folder manag...

4. Changing the Projector Settings This chapter explains the settings on the menu screen and how to change the settings. Viewing the Menu Screen CLB065 6 4 5 1 2 3 1. Image Adjustment menu tab Enables the image items to be adjusted and configured.For the Image Adjustment menu settings, see p.83 "...

• Inputting text Use the keyboard that is displayed on screen to input text. You can also use the numberbuttons on the remote control to input numbers. • The control panel on the projector can be used for operations, but numbers for settings cannot be inputted. • A confirmation screen appears before...

3. Select [Reset All], and then press the [Enter] button. 4. Select [OK] in the confirm screen, and then press the [Enter] button. • The following settings cannot be reset with this function: • [User Logo] in [Display Settings] To reset the registered user logo, select [Reset Logo] in [Display Setti...

List of Menu Items Image Adjustment menu Item Summary Picture Mode Select the picture mode. Contrast Adjust the image contrast. Brightness Adjust the image brightness. Color Saturation Adjust the color saturation of the image. Tint Adjust the tint of the image. Sharpness Adjust the sharpness of the ...

Item Summary Wall Color Correction Select the image hue according to the projectionsurface when the image is being projected onsomething other than a screen. Background on NoSignal Select the image display when there is no inputsignal. Display Help Select whether or not to display Help when there is...

Item Summary Power On Method Select whether or not to use the auto power onfunction. Standby Energy Saving Select the level of energy saving while on standby. Lamp Power Select the lamp power level. High Altitude Mode Select whether or not to increase the speed of thefan. Key Lock Select whether or ...

Item Summary PJLink Specify the PJLink settings. Security Specify the security settings. Projection Server Specify the projection server settings. Display Status Confirm the status of the network applicationsettings. Display Status Item Summary Input Displays the selected input signals. Resolution D...

Image Adjustment Menu Picture Mode Select the picture mode.This function is not available when you select [On] in [3D Projection] under [Default Settings].Default: [Standard] • Bright This image mode makes it easier to see the projection in bright locations. • Standard This is the standard image mod...

Display Settings Menu Keystone Adjust for image keystone distortion.This setting changes automatically depending on the angle of the projector position if you select[On] in [Auto Keystone] under [Default Settings].Default: 0 • -32 to +32 Aspect Select the screen size of the image.This function is no...

Default Settings Menu Auto Input Search Select whether or not to only select inputs with signals when switching input signals.Default: [On] • On• Off Auto Keystone Select whether or not to implement keystone correction automatically depending on the angle ofthe projector's position.Default: [On] • O...

Network/USB Settings Menu USB Settings You can specify how to project files from a USB device and confirm the status of the USB device. Settings • Auto Demo Select whether or not to start a slide show automatically when the projector is connected tothe USB device.Default: [Off] • On• Off • Repeat Se...

• Energy Saving IO Firmware Version Display the energy-saving IO firmware version. Network Settings Enables the wired LAN and wireless LAN settings, projector ID registration, and network status to beverified. Wired LAN Specify the wired LAN settings. • Wired LAN Settings • Transmission Speed Select...

• Subnet Mask Enter the subnet mask.Default: 0.0.0.0 • Default Gateway Enter the default gateway.Default: 0.0.0.0 Wireless LAN Specify the wireless LAN settings. • Simple Settings • Wireless Connection via USB Select whether or not to use the wireless LAN settings function using a USB memorydevice.D...

• 4 • Network Key Enter the WEP key when you select [WEP Shared Key] or [Open System] in[Authentication Method] and select [WEP] in [Encryption Method].When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5characters for ASCII. When using 128 bit WEP, up to 26 characters ...

Network Application Settings These settings enable the projection server, PJLink, etc., to be specified, and the network applicationstatus to be verified. PJLink Specify the authentication and passwords when accessing the projector using application softwarethat is compatible with PJLink. • PJLink A...

5. Troubleshooting This chapter explains the basic problems and troubleshooting methods when an indicator light is lit. Indicator Display List The projector uses the [Power] button, indicators, and beeps to notify you if a malfunction occurs. Checkthe indicator's status, and implement the following ...

Common Problems If you think a malfunction has occurred, check the following before contacting your servicerepresentative. Problem Solutions Power does not turn on. • Make sure the power plug or connector is connected correctly. • Make sure the lamp cover is mounted correctly. For details, see p.117...

6. Maintenance This chapter explains the operating precautions and maintenance for the projector. Operating Precautions Pay attention to the following points when using the projector: • If moving the projector under conditions including vibration and shock, use both the packing case and included car...

Cleaning the Projector • Do not remove any covers or screws that are not mentioned in this manual. There are high voltage components inside the product that may cause electric shock. Contact your servicerepresentative if any of the product's internal components require maintenance, adjustment, orrep...

Managing the Projector Using Projector Management Utility Projector Management Utility conforms to the PJLink class 1 standards, and is compatible with all class 1commands.A maximum of 100 projectors connected to the network can be managed using one computer.Projector Management Utility operating en...

Consumables • Lamp unit Replacement Lamp Type 3 • Contact your sales or service representative for information about consumables. Consumables 123

7. Appendix This chapter explains the projector's specifications and compatible signals. This chapter also explainswhere to inquire about the projector and related services. Specifications Specifications for the Projector Component Specifications Power consumption 300 W or less Weight Approx. 3.0 kg...

List of Compatible Signals Set the computer and AV equipment output signals so that they match the input signals compatible withthe projector.If resolutions or signal frequencies that are not compatible with the projector are input, the image mayflicker or become blurred. Further, the image may not ...

Specifications for Ports Computer In Port Pin assignment 5 1 10 15 11 6 CLB064 Pin No. Pin description During RGB input During Y/Pb/Pr input 1 Video signal (R) Color difference signal (Pr) 2 Video signal (G) Luminance signal (Y) 3 Video signal (B) Color difference signal (Pb) 4 N.C 5 GND 6 GND (R) G...

Input Signal • RGB input RGB signals: 0.7V (p-p), 75 Horizontal sync signal: TTL level (Pos/neg polarity)Vertical sync signal: TTL level (Pos/neg polarity) • Y/Pb/Pr input Y signal: 1.0V (p-p), 75 Pb/Pr signals: 0.7V (p-p), 75 Control Port Interface format Communication method RS-232C, 115,200bps, N...

Where to Inquire Contact your sales or service representative for further information about topics covered in this manualor to inquire about topics not covered in this manual. 7. Appendix 138