Ricoh PPC-154 - Manuals

v Additional Information and Assistance Step 1. Visit the Advantech web site at www.advantech.com where you can find the latest information about the product. Step 2. Contact your distributor, sales representative, or Advantech's cus- tomer service center for technical support if you need additional...

PPC-154 User’s Manual vi Safety Instructions 1. Read these safety instructions carefully.2. Keep this User's Manual for later reference.3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the...

vii Wichtige Sicherheishinweise 1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.2. Heben Sie diese Anleitung für den späteren Gebrauch auf.3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch z...

ix |Contents Chapter 1 General Information ........................................2 1.1 Introduction ....................................................................... 2 1.2 Specifications .................................................................... 3 1.3 Dimensions ......................

CHAP T ER 1 General Information This chapter gives background information on the PPC-154 panel PC.Sections include: • Introduction• Specifications• Dimensions

PPC-154 User’s Manual 2 Chapter 1 General Information 1.1 Introduction Advantech PPC-154T is an Intel Pentium 4 processor–based Panel PC with 15” LCD display. The powerful Pentium 4 CPU and Intel 845GV chipset with a 15” LCD display brings the most dynamic applications to life without sacrifices to ...

3 Chapter 1 1.2 Specifications General • Dimensions (W x H x D): 420 x 323 x 130.5 mm (16.54" x 12.72" x 5.12") • Weight: 7 kg(15.4 lbs) • Power supply: AC model: 180 watts Input voltage: 100~240 VAC , 4 A max. @ 50 ~ 60 HzOutput voltage: [email protected], +5V@12A, +12V@[email protected], +5VSB@2A...

PPC-154 User’s Manual 4 • PCI bus expansion slot: Accepts one PCI bus card • Watchdog timer: 62-level, interval 1 ~ 62 seconds. Automatically gen- erates system reset or IRQ11 when the system stops due to a program error or EMI. Jumperless selection and software enabled/disabled • Battery: 3.0 V @ 1...

5 Chapter 1 • PCI bus interface: Complies with PCI Local Bus Specification 2.1, and supports the 32-bit Cardbus (Card-32) and the 16-bit PC card (Card-16) without external buffers • Hot insertion and removalTouchscreen (optional) Optional Modules • CPU: Intel Pentium 4 or Celeron processor up to 3.0...

PPC-154 User’s Manual 6 Environment • Temperature: 0 ~ 45° C (32 ~ 122° F) • Relative humidity: 10 ~ 95% @ 40° C (non-condensing) • Shock: 10 G peak acceleration (11 msec duration) • Power MTBF: 100,000 hrs • Certifications: EMC: CE, FCC, VCCI, BSMI approvedSafety: CE, CAS, UL, CB. 1.3 Dimensions Fi...

CHAP T ER 2 System Setup This chapter details system setup on the PPC-154 panel PC.Sections include: • A Quick Tour of the Panel PC• Preparing for First-time Use• Installation Procedures• Running the BIOS Setup Program• Installing System Software• Installing the Drivers

PPC-154 User’s Manual 12 Chapter 2 System Setup 2.1 A Quick Tour of the Panel PC Before you start to set up the panel PC, take a moment to become familiar with the locations and purposes of the controls, drives, connectors and ports, which are illustrated in the figures below. When you place the pan...

13 Chapter 2 When you look at the left side of the panel PC, you will see the floppy disk drive, CD-ROM drive and PCMCIA expansion sockets, as shown in Fig. 2-2. Figure 2.2: Left side view of the panel PC When you turn the panel PC around and look at its rear cover, you will find the PCI/ISA expansi...

PPC-154 User’s Manual 14 2.2 Preparing for First-time Use Before you start to set up the panel PC system, you should have at least the following items ready:• Power cord (in the accessory box)• Keyboard• Mouse (for system software installation) 2.3 Installation Procedures 2.3.1 Connecting the power ...

15 Chapter 2 2.4 Running the BIOS Setup Program Your panel PC is likely to have been properly set up and configured by your dealer prior to delivery. You may still find it necessary to use the panel PC's BIOS (Basic Input-Output System) setup program to change system configuration information, such ...

PPC-154 User’s Manual 16 2.5 Installing System Software Recent releases of operating systems from major vendors include setup programs which load automatically and guide you through hard disk preparation and operating system installation. The guidelines below will help you determine the steps necess...

17 Chapter 2 2.6 Installing the Drivers After installing your system software, you will be able to set up the Ether-net, SVGA, audio, PCMCIA and touchscreen functions. All the drivers except the CD-ROM drive driver are stored in a CD-ROM disc entitled "Drivers and Utilities." The CD-ROM driv...

CHAP T ER 3 Using the Panel PC This chapter details installing thePPC-154 panel PC hardware.Sections include: • Introduction• Floppy Drive• CD-ROM Drive• PCMCIA• PS/2 Mouse and Keyboard• PCI/ISA Bus Expansion• Parallel Port• Serial COM Ports• VGA Port• Game Port• USB Ports• Audio Interface• Ethernet...

PPC-154 User’s Manual 20 Chapter 3 Using the Panel PC 3.1 Introduction This chapter describes basic features and procedures for using the panel PC. Topics covered include the floppy drive, CD-ROM drive, I/O ports, touchscreen, and so on.. 3.2 Floppy drive To insert a floppy disk, hold it with your r...

PPC-154 User’s Manual 22 3.4 Multi-card Reader Memory Flash Cards are inserted and ejected in much the same way as diskettes.To insert a Flash Memory card, align the card with the socket and slide the card into the socket until it locks into place. Note that some Flash Memory cards must be prepared ...

23 Chapter 3 3.5 PS/2 Mouse and Keyboard If you wish to use a full-size desktop keyboard and PS/2 mouse with your panel PC, follow these instructions:1. Be sure the panel PC is turned off. 2. Attach the keyboard to the 5-pin port of the purple color. 3. Attach the PS/2 mouse to the green color port....

PPC-154 User’s Manual 24 3.7 Parallel port The panel PC supports the latest EPP and ECP parallel port protocols for improved performance and versatility with compatible printers or other devices.To connect the panel PC to a printer or other devices:1. Be sure both the panel PC and the printer/device...

25 Chapter 3 3.9 VGA Port An external VGA-compatible device may be connected to the system through the 15-pin external port located on the rear of the system unit. The panel PC simultaneously supports an external CRT monitor in addi-tion to its own LCD display.1. Be sure the panel PC is turned off. ...

PPC-154 User’s Manual 26 3.12 Audio Interface The audio interface includes three jacks: microphone in, line out and line in. (See Fig. 3-5.) Their functions are:Microphone in: Use an external microphone to record voice and sound.Line out: Output audio to external devices such as speakers or earphone...

PPC-154 User’s Manual 28 Chapter 4 Hardware Installation and Upgrade 4.1 Jumpers and Connectors The panel PC consists of a PC-based computer that is housed in a plastic rear panel and a metal shielding case. Your HDD, SDRAM, power sup-ply, CPU, and so on are all readily accessible by removing the re...

29 Chapter 4 4.2 Disassembling the Panel PC The following are standard procedures for disassembling the panel PC before you upgrade your system. All procedures are illustrated in Fig. 4-1, 4-2, 4-3 and 4-4.1. Unscrew the three screws that secure the plastic side cover, and then remove it. Figure 4.1...

PPC-154 User’s Manual 30 3. Lift the right side of the rear cover first to remove it. Figure 4.3: Opening the rear cover Figure 4.4: The PPC without the Rear Cover 4. Unscrew the four screws that secure the CPU cover. 5. Remove the floppy drive, HDD, and CD-ROM cables; then remove the side panel. 6....

31 Chapter 4 4.3 Installing the 2.5" Hard Disk Drive (HDD) You can attach one enhanced Integrated Device Electronics (IDE) hard disk drive to the panel PC's internal controller which uses a PCI local-bus interface. The advanced IDE controller supports faster data transfer and allows the IDE hard...

PPC-154 User’s Manual 32 Figure 4.7: Plug the EIDE cable into the HDD Figure 4.8: Screw the right side of the metal plate to fix it Figure 4.9: Screw the left side of the metal plate to fix it

33 Chapter 4 1. Detach and remove the plastic rear cover and side panel. 2. There is a metal plate which holds the HDD to the upper right-hand side of the metal shielding case. (See Fig. 4-2.) Remove the two screws on the metal plate. 3. Pull the metal plate toward the outside of the unit, and remov...

PPC-154 User’s Manual 34 1. Lift up the ZIF. 2. Place the CPU carefully into the socket. 3. Attach the heatsink and fan on top of the CPU, and fasten them with the retention bracket.

35 Chapter 4 4. Detach.the CPU’s fan power cable to the connector FAN1 4.5 Installing the DDR SDRAM Memory Module You can install from 64 MB to 2 GB of DDR SDRAM memory. The panel PC system provides two 184-pin DIMM (Dual Inline Memory Module) socket and supports 2.5 V DDR SDRAM. Figure 4.10: Placin...

PPC-154 User’s Manual 38 Chapter 5 Jumper Settings & Connectors 5.1 Jumpers and Connectors 5.1.1 Setting jumpers You can configure your panel PC to match the needs of your application by setting jumpers. A jumper is the simplest kind of electrical switch. It consists of two metal pins and a smal...

39 Chapter 5 5.1.2 Jumpers and switches The motherboard of the PPC-153 has a number of jumpers that allow you to configure your system to suit your applications. The table below lists the function of each of the board’s jumpers. 5.1.3 Jumper Locations Figure 5.1: Jumpers on the PPC-153 motherboard T...

PPC-154 User’s Manual 42 5.2 CPU Installation You can install an Intel® Pentium®4 or Celeron™ CPU without setting any frequency ratio or voltage. *Default setting 5.3 CMOS Clear for External RTC (JP3) This jumper is used to erase CMOS data and reset system BIOS informa-tion.The procedure for clearin...

PPC-154 User’s Manual 44 5.5 VGA interface The panel PC's AGP VGA interface can drive conventional CRT dis-plays. It is also capable of driving a wide range of flat panel displays, including electroluminescent (EL), gas plasma, passive LCD and active LCD displays. 5.5.1 LCD panel power setting The p...

CHAP T ER 6 Driver Installation This chapter provides information on how to install the drivers for PPC-154Sections include: • Introduction• Installation of PPC-154 driver for Windows 98/NT/2000/ME/XP • Further Information

PPC-154 User’s Manual 46 Chapter 6 Driver Installation 6.1 Introduction The PPC-154 uses the chipset 845GV from Intel., with built-in high per-formance 2D/3D Intel Extreme Graphics 2, flexible 100/133MHz system bus settings, support for DDR266 SDRAM and multiple power saving modes make the Intel 845...

47 Chapter 6 6.2.1 Installation of VGA driver Please follow the driver path and execute it .D:\PPC-154\VGA\winxxxx\setup.exe. 6.2.2 Installation of Audio D:\PPC-154\audio\winxxxxsetup.exe 6.2.3 Installation of ICH4 USB2.0 D:\ PPC-154\ ICH4 USB2.0\ 6.2.4 Installation of LAN D:\PPC-154\Intel LAN 6.2\s...

PPC-154 User’s Manual 50 Appendix A Pin Assignments A.1 ATX Power connector 1 (CN1) Table A.1: AT Power connector 1 (CN1) Pin Signal Pin Signal 1 3.3V 11 3.3V 2 3.3V 12 -12V 3 GND 13 GND 4 5V 14 PS-ON 5 GND 15 GND 6 5V 16 GND 7 GND 17 GND 8 PW-OK 18 -5V 9 5VSB 19 5V 10 12V 20 5V

PPC-154 User’s Manual 56 Appendix B Full Disassembly Procedure If you want to completely disassemble the panel PC, follow the step-by-step procedures below. Users should be aware that Advantech Co., Ltd. takes no responsibility whatsoever for any problems or damage caused by the user disassembly of ...

57 Appendix B 3. Lift the right side of the rear cover first to remove it 4. The PPC without the rear cover 5. Unscrew the board of the card reader

PPC-154 User’s Manual 58 6. Unscrew the screw of PCI extension bus card away from PCI slot 7. Lift out the metal plate of the I/O shield from the I/O 8. Lift out FPC cable from the FDD

59 Appendix B 9. Lift out the cable from the CD-ROM 10. Unscrew the two screws of the bottom side to loosen the metal plate of CD-ROM / FDD module 11. unscrew the otherside of the metal plate

PPC-154 User’s Manual 60 12. Unscrew the screws to loosen the CD-ROM and FDD from mod-ule. 13. Lift the FDD from the module. 14. Unscrew the screws from the side of the module to loosen the CD-ROM

61 Appendix B 15. Lift up the ATX 20 pins power connector. 16. Lift up the ATX 12V 4 pins power connector. 17. Lift up the EIDE cable from mainboard.

PPC-154 User’s Manual 62 18. Loosen the screws from the bottom for remove the power module 19. Loosen the screws to lift up the board