Page 2 - Contents; IMPORTANT SAFETY INSTRUCTIONS
Contents IMPORTANT SAFETY INSTRUCTIONS Polarization instructions Thermal fuse protection 4 Description of the vacuum 5 Assembly & Operation Attaching the handle 6 On/Off switch 7 Handle adjustments 7 Replacing vacuum bag 8 Replacing secondary and post filters 9 Removing and reinstalling bottom p...
Page 3 - READ ALL INSTRUCTIONS BEFORE; SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE The manufacturer cannot accept responsibility for damage caused when the appliance is not used according to the in...
Page 4 - Polarization instructions; Grounding Instructions; WARNING; – Improper connection of
Polarization instructions Grounding Instructions Model R800C Only This vacuum cleaner must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This vacuum cleaner is equipped with a cord having ...
Page 5 - To reset the thermal fuse:; the main body (roughly one inch to the right of the left wheel); Thermal fuse protection
4 Your Riccar vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal protector is designed to protect your vacuum cleaner from overheating due to a restriction in airflow (i.e. clogged hose, operating the vacuum without a bag). Should this situation occur, the thermal...
Page 6 - Description of the vacuum; Xenon
5 Description of the vacuum Handle grip Headlight Self-adjusting nozzle Furniture guard Bag compartment cover Carrying handle On/Off switch(Models R600, R700, R800, R800C) Cord clip Cord storage hooks Foot pedal release Telescopic wand Power cord Stretch hose On/Off switch(Model R500) Crevice tool U...
Page 7 - Operation; Attaching the handle; . On the bottom of the handle are two “T-shaped”
6 Operation Attaching the handle The vacuum cleaner and the handle are packed separately. 1. After first removing the handle screw [Fig. 1], position the handle behind the vacuum cleaner and level with the top of the unit. Hold the power cord down and away from the vacuum while the handle is being a...
Page 8 - . Turn the vacuum cleaner off before unplugging; Handle adjustments; Upright Position: Handle locks in this position
7 Operation On/Off switch 1. To start the vacuum cleaner, flip the ON/OFF switch (located on the handle on Models R600, R700, R800 and R800C or on the side of bag compartment on Model R500) to the ON position as indicated by “|” on the switch [Figs. 5 and 6]. . To stop the vacuum cleaner, flip the O...
Page 9 - Replacing vacuum bag; Remove the used vacuum bag by pulling bag
8 Operation Replacing vacuum bag Genuine Riccar vacuum bags should be used for best performance and air filtration. Always operate the vacuum cleaner with a vacuum bag installed. NOTE: If secondary or post filters need to be replaced, see page 9 before replacing the vacuum bag. 1. Remove the used va...
Page 10 - Replacing secondary filter; . Remove secondary filter from bottom of bag; Replacing post filter; Remove bag compartment cover and locate the
9 Operation Replacing secondary filter The secondary filter protects the motor from dust and dirt. Before installing a new vacuum bag, check the filter. Accumulated dirt in the bag compartment will be collected on this filter and may restrict motor performance when the filter becomes dirty. 1. Remov...
Page 11 - Removing and reinstalling bottom plate; the vacuum cleaner in the low position.
10 Operation Removing and reinstalling bottom plate CAUTION: Disconnect the vacuum cleaner from the electrical outlet before removing the bottom plate. 1. Depress handle release pedal twice and place the vacuum cleaner in the low position. . Turn vacuum cleaner over, exposing the underside [Fig. 15]...
Page 12 - Replacing headlight bulb; Remove bottom plate (See “Removing and; Replacing agitator belt; Remove bottom plate (See “Removing and reinstalling
11 Operation Replacing headlight bulb CAUTION: Disconnect the vacuum cleaner from the electrical outlet before replacing bulb. 1. Remove bottom plate (See “Removing and reinstalling bottom plate”). . Remove the headlight bracket by pulling upward on bracket [Fig. 19]. To remove the light bulb, pull ...
Page 13 - Unclogging nozzle and hose; Pull out and turn the lid of the cleaning
1 Operation Unclogging nozzle and hose CAUTION: Disconnect the vacuum cleaner from the electrical outlet before cleaning nozzle housing. The nozzle hose, located on the back of the vacuum, carries the dirt from the nozzle to the vacuum bag. The hose also functions as the attachment cleaning hose. Fi...
Page 14 - Full bag indicator light
1 Operation Full bag indicator light Models R700, R800 and R800C The warning light is located on top of the bag compartment (see Fig. 6). The light will trigger if the vacuum bag is full or if there is a clog in the vacuum cleaner. If the light indicator turns on, check the vacuum bag. If it is not ...
Page 15 - Tools; FastTaskTM cleaning tools; Remove the telescopic wand from the body of the
14 Tools FastTask™ cleaning tools (Models R500, R600, R800 and R800C) Select models are equipped with FastTask™ cleaning tools which include a combination upholstery/dusting tool, crevice tool and stretch hose. 1. Remove the telescopic wand from the body of the vacuum [Fig. 7]. Unlock wand collar (l...
Page 16 - Pull out and open the suction control dial by
15 Tools 1. How to connect the hose assembly to the vacuum cleaner: Pull out and open the suction control dial by turning the lid located on the back of the vacuum cleaner. Insert the soft, rubber end of the hose assembly into the cleaning attachment opening. Push in while twisting the hose end to e...
Page 17 - For Best Performance; for future reference.; Owner’s information
16 The model and serial number of this product may be found on the back side of the unit. You should note the model and serial number of your unit in the spaces provided below, and retain this book as a permanent record of your purchase. Date of purchase _____________________________________________...
Page 18 - Warranty; How Long Coverage Lasts:; • Damage to the vacuum which occurs from neglect, abuse, alterations,; How State Law Applies:
17 Warranty What is Covered: This warranty covers any defects in material and workmanship in your new Riccar vacuum. How Long Coverage Lasts: Warranty coverage for Riccar R-Series household model vacuums lasts three years and one year for R-Series commercial model vacuums. Household models used comm...