Riccar R10D - Manuals - manualsarea.com

Page 3 - Contents; Getting Started

1 Contents Getting Started Important Safety Instructions 2 Polarization Instructions 3 State of California Proposition 65 Warnings 3 Description of the Vacuum 4 Assembling the Vacuum 5 Operation Reclining the Handle 6 On/Off Switch 6 Edge Cleaning 6 Automatic Carpet Height Adjustment 6 Bare Floor Cl...

Page 4 - IMPoRtAnt sAFetY InstRUCtIons; READ ALL INSTRUCTIONS BEFORE; To reduce the risk of fire, electric shock or injury:; sAVe tHese InstRUCtIons.

2 IMPoRtAnt sAFetY InstRUCtIons When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE The manufacturer cannot accept responsibility for damage caused when the appliance is not used according to the ...

Page 5 - PolARIzAtIon InstRUCtIons; State of California Proposition 65 Warnings:; cause birth defects or other reproductive harm.

3 PolARIzAtIon InstRUCtIons Power Cord, 2-Wire Polarized Cord To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature....

Page 6 - DesCRIPtIon oF tHe VACUUM

4 DesCRIPtIon oF tHe VACUUM 1 Ergonomic Handle 2 On/Off Power Switch 3 Bag Compartment 4 Vacuum Nozzle 5 Headlight 6 Furniture Guard 7 Brushroll Jam Indicator (models R10P and R10SAND only) 8 Circuit Breaker Reset Button (models R10S and R10D only) 9 Handle Release Pedal 10 Quick Release Cord Hook 1...

Page 7 - AsseMblIng tHe VACUUM; Attaching the Handle to the Vacuum

5 AsseMblIng tHe VACUUM Attaching the Handle to the Vacuum NOTE: Do not plug in the vacuum until it is completely assembled. The vacuum cleaner and the handle are packed separately and require assembly. • Thread the cord through the lower and upper cord guides on the back of the vacuum bag (Fig. 1)....

Page 8 - oPeRAtIon; Reclining the Handle; • Press the handle release pedal located on the; Edge Cleaning

6 oPeRAtIon Reclining the Handle • Press the handle release pedal located on the back of the vacuum with your foot to recline the handle (Fig. 1). On/Off Switch • The power switch located on the vacuum handle, is a three-way switch (Fig. 2). The middle position is the “Off” setting, the rear positio...

Page 9 - MAIntenAnCe AnD CARe

7 Fig. 2 Power Cord Care • If the cord or plug has any apparent damage, refrain from using the vacuum. Please visit an Authorized Riccar Retailer for a new cord or plug. • When the vacuum is in use, hold the cord to keep from running over it. • Avoid obstructions and do not pull the cord around shar...

Page 10 - Replacing the Vacuum Bag; • Unzip the bag compartment.

8 Replacing the Vacuum Bag NOTE: Unplug the vacuum cleaner from the electrical outlet before changing the bag. • Unzip the bag compartment. • Remove the used vacuum bag by pulling the green bag collar tab away from the vacuum (Fig. 1). Slide the used bag out of the bag holder which automatically sea...

Page 11 - Removing and Reinstalling the

9 MAIntenAnCe AnD CARe MATERIAL DRAWN ISSUED SCALE FINISH DATE DATE DO NOT SCALE UNLESS OTHERWISE SPECIFIED DESCRIPTION DRAWING SIZE:D PART NUMBER SHEET 1 OF 1 X.X ± .02 IN RADII X.X ± .02 X.XX ± .01 IN X,XX ± .01 X.XXX ± .005 IN MACHINE SURFACE X.XXXX ± .0005 IN BREAK SHARP CORNERS TO .010 MAX ± 0 ...

Page 12 - Replacing the Agitator Belt; To Reduce the Risk of Electrical; Lifetime Belt Protection Warranty

10 Fig. 1 Fig. 2 MAIntenAnCe AnD CARe Replacing the Agitator Belt (Models R10S and R10D only) WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. NOTE: To ensure maximum cleaning efficiency, the belt should be checked regularly to be sure...

Page 13 - Brushroll Jam Indicator; • Turn off the vacuum and remove the cause of

11 Brushroll Jam Indicator (Models R10P and R10SAND only) If an object, such as a throw rug or article of clothing is ever picked up into your vacuum, the vacuum will sense this “jammed brushroll” condition and turn off the brushroll. When this happens, the Brushroll Jam Indicator light on the top o...

Page 14 - Resetting the Circuit Breaker; Replacing the Squeegee

12 Resetting the Circuit Breaker (Models R10S and R10D only) WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. Your vacuum features a circuit breaker to protect the machine against damage due to a surge in the electrical current. Electr...

Page 15 - PRobleM solVIng gUIDe; PROBLEM; Troubleshooting; • Genuine HEPA Media Vacuum Bags:; For Best Performance

13 PRobleM solVIng gUIDe PROBLEM Vacuum won’t turn on Vacuum won’t pick up or low suction Dust escaping from vacuum POSSIBLE REASON • Power cord not firmly plugged in • Blown fuse or tripped breaker • Needs service • Vacuum bag full • Broken belt • Worn brushroll • Vacuum bag not installed properly ...

Page 16 - WARRAntY; How Long Coverage Lasts:; misuse or improper maintenance.; How State Law Applies:; Register your warranty online at

14 WARRAntY What is Covered: This warranty covers any defects in material and workmanship in your new Riccar vacuum and applies exclusively to the original purchaser. How Long Coverage Lasts: Warranty coverage for R10S and R10D lasts four years. R10P and R10SAND lasts 5 years. Household models used ...

Page 17 - oWneR’s WARRAntY InFoRMAtIon; keep this for your records...

15 oWneR’s WARRAntY InFoRMAtIon keep this for your records… Date of purchase Serial number Model number Purchased from: Store name Address City, State, Zip Telephone

Page 18 - notes