RELIABLE 125IS - Manuals

RECOMMENDATIONS DO’S 1. Check that the main voltage stated on the rating plate corresponds to the localelectricity supply. 2. Unwind and straighten the power cord and supply cord before use. 3. Place the appliance on a firm and steady surface. 4. The iron must be used and rested on a stable surface ...

CAUTION DONT’S 1. Do not allow children to touch the appliance when ironing. 2. Do not leave the appliance unattended when it is connected to a main supply outlet. 3. Do not use an extension power cord set unless it corresponds with your local manu-facturing standards. 4. Do not add perfume, vinegar...

1. Function Button 7. Steam Trigger 2. Control Panel 8. Steam Hose 3. Anti-scale Cartridge 9. Soleplate 4. Carry Lock 10. Power Cord 5. Water Inlet Cover 11. Iron Unit 6. Water Tank 12. Base MAVEN 125IS KEY FEATURES 08

During first time use, it may take 10-30 seconds for steam to start. This may take longer if cartridge is not completely soaked. Your unit may make “chugging” noises upon initial use. This is normal. It is simply the water drawing into the unit. As noted above, this chugging may take 10-30 seconds w...

11 FILLING THE WATER TANK 1. Disconnect the power cord from the electric outlet. 2. Pull out the water tank (Figure 2). 3. Open the water inlet cover and fill tank with water until the maximum level(Figure 3). 4. Put the water tank back and make sure that it is firmly positioned in place(Figure 4). ...

12 PROGRAMMED TEMPERATURE Auto Mode The appliance is equipped with a programmed temperature feature which allows it to iron all ironable fabrics without adjusting the temperature of the iron. It is the default mode of this appliance. The ECO indicator will light up when the lowest temperature is bei...

13 TEMPERATURE CONTROL SETTINGS Acetate Elastane Polyamide Polyester Silk Viscose Wool Cotton Linen If you are not sure about the fabric is made of, use the auto mode or start ironing at a low temperature. AUTO STEAM FUNCTION The appliance will automatically adjust the steam output to the selected t...

15 VERTICAL STEAMING You can remove wrinkles from garments, curtains and fabrics in hanging positions. 1. Select your desired steam temperature setting. 2. Hold the iron in a vertical position (Figure 7) 15 to 30 centimeters away from the garment. 3. Press the steam trigger. Warning: Do not apply st...

17 FIGURE 16 Note: If the anti-scale cartridge is not installed, or installed incorrectly, you will not be able to use the appliance. SELF CLEANING This function removes the scale and mineral build-up from the steam chamber. The appliance will remain in the best condi-tion if this function is perfor...

18 CLEANING AND MAINTENANCE 1. Disconnect the power cord from the main power supply. 2. Use a damp cloth to remove deposits from the soleplate and exterior parts of the iron. 3. Never use sharp or rough objects to remove deposits from the sole plate. STORAGE 1. Make sure the water is completely drai...

19 TROUBLESHOOTING If your steam station does not work well, check the following points: PROBLEM CAUSE SOLUTION The unit does not work There is not enough heat Wait for unit to heat up It is not plugged in Plug unit in The anti-scale cartridge is not installed/installed improperly Install the scale ...