RCA RLDED3950A - Manuals

RCA RLDED3950A – Manual in PDF format online.

Manuals:

Manual

Manual RCA RLDED3950A

Summary

Page 3 - Introduction; carefully and keep it handy for future reference.; INSTALLATION; lighting is recommended for comfortable viewing.

2 Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION ① Locate the receiver in the room where direct light does ...

Page 4 - Warning

3 Warning This symbol is intended to alert the user to avoid the risk of electric shock. This equipment may only be disassembled by qualified service personnel. This symbol is intended to alert the user to the presence of important operation and maintenance instructions in the literature accompanyin...

Page 5 - Caution; To prevent fire or electrical shock hazard, do not expose; do not place objects; Caution

4 Caution Caution High voltages are used in the operation of this product. - Do not open the product's casing. Refer servicing to qualified service personnel . Caution To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture ， do not place objects filled with liqui...

Page 7 - Television Antenna Connection Protection; Important Information; External Television Antenna Grounding

6 Television Antenna Connection Protection Important Information External Television Antenna Grounding If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static ...

Page 8 - Attacthing or Removing the Stand; the bottom of the stand. Screw in the 5 screws to secure the stand.

7 Attacthing or Removing the Stand 1. To attach the base place the display unit flat on a table. Afterwards attach the stand onto the bottom of the stand. Screw in the 5 screws to secure the stand.

Page 9 - Installing Batteries to the Remote Control; Only use AAA batteries.

8 2. To remove the stand, remove the 4 screws in the area and the stand will come off. Installing Batteries to the Remote Control Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery...

Page 10 - Identifying Front and Rear Panel; INDICATOR LIGHT

9 Front View Rear View Mounting Pattern Identifying Front and Rear Panel INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns blue when the TV is turned on. Because of the LED in the panel, the TV might take 10 – 12 seconds to power on. REMOTE SENS...

Page 11 - If You Have Digital Cable without Cable Box or Antenna...; Connection Suggestions; Make sure the power of HDTV is turned off.

10 If You Have Digital Cable without Cable Box or Antenna… Connection Suggestions 1. Make sure the power of HDTV is turned off. 2. Connect the RF cable from your antenna or digital cable to the TV port on the back of your HDTV. 3. Turn on the HDTV. 4. Follow the first time on screen instructions.  ...

Page 12 - This source shares audio jacks with composite video.

11 Connecting DVD Player with Component YPbPr… 1. Make sure the power of HDTV and your DVD player is turned off. 2. Obtain a Component Cable. Connect the green color connector to both your DVD player and YPbPr’s green connector port on the back of your HDTV. 3. Connect the blue color connector to bo...

Page 13 - This source shares audio jacks with YPbPr.

12 Connecting Wii™ with Composite… 1. Make sure the power of HDTV and your Wii™ is turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ and AV’s Yellow Video connector port on the back side of your HDTV. 3. Obtain a RCA Audio Cable. Connect the white color...

Page 17 - Audio input terminal for Component and Video; Only be used to upgrade

16 Main unit description Control Panel Button Function TV Terminal Connections 1. Coaxial out terminal. 2. RF antenna. 3. VGA input terminal of simulation signal of PC. 4. PC AUDIO input terminal. 5. Video input terminal. 6. AUDIO input terminal （ Audio input terminal for Component and Video ） . 7. ...

Page 18 - Remote control; Switch the program digit.; EPG; This button is not available.; INFO

17 Remote control POWER : Power on/off button, press once to turn the TV on and press again to turn the TV off. MUTE: Press this button to mute or restore sound. MTS/AUDIO : When stereo program is received, press this key to switch sound system between mono and stereo. When SAP program is received, ...

Page 19 - Installation Guide; MENU; PICTURE; Picture Settings; ns as following can be adjusted.

18 Installation Guide Press MENU button to display the MAIN OSD MENU ; Press ◄ / ► button to select the MENU you want; Press ENTER button to enter the sub menu; Press ▼ / ▲ button to select the option and then press ◄ / ► to adjust the value in the sub menu; You can press MENU button to go back to t...

Page 20 - Screen Size

19 Press ▼ / ▲ button to select Brightness , then press ◄ / ► button to adjust. . Press ▼ / ▲ button to select Contrast , then press ◄ / ► button to adjust. . Press ▼ / ▲ button to select Color , then press ◄ / ► button to adjust. . Press ▼ / ▲ button to select Tint , then press ◄ / ► button to adju...

Page 21 - Dynamic Contrast

20 Press ▼ / ▲ button to select Auto Adjust , then press ENTER button to start auto adjusting. Press ▼ / ▲ button to select Horizontal Position , then press ◄ / ► button to adjust. Press ▼ / ▲ button to select Vertical Position , then press ◄ / ► button to adjust. Press ▼ / ▲ button to select Clock ...

Page 22 - SOUND; Sound Settings; Bass; Press; Balance

1 2 SOUND Sound Settings Press ENTER when the Sound Settings item is highlighted. Then you will go to the sub-menu as following. Press ▼ / ▲ to select the desired menu item. Press ENTER to proceed if necessary. Press  /  to adjust the item the desired level. When you have changed the settings, you...

Page 23 - AVL; Analog Sound; Digital Audio output; Equalizer Settings; Settings

2 2 AVL Press ▼ / ▲ button to select the item AVL, then press ENTER button to adjust. Analog Sound Press ▼ / ▲ button to select the item Preferred Analog Sound, then press ◄ / ► button to select the prefer audio Digital Sound Press ▼ / ▲ button to select the item Preferred Digital Sound, then press ...

Page 24 - Channel List; Favorite List; Channel Setting; CHANNEL MENU; Note: This menu is only shown when the input source is TV.

23 Channel List Press ▼ / ▲ button to select Channel List, then press enter scan the Channel List. If you select the press enter button to option “In Channel List” On, the channel label will display in the list. Favorite List Press ▼ / ▲ button to select Favorite List, then press ENTER button to sca...

Page 26 - PARENTAL CONTROL; Input password to enter, default password is “0000”.

25 PARENTAL CONTROL Input password to enter, default password is “0000”. V-CHIP Press ▼ / ▲ button to select V-CHIP, then press ENTER button to adjust. A Sub Menu Will appear as below.

Page 27 - ENTER; button to adjust. A Sub; Movie Rating

26 US V-CHIP Press ▼ / ▲ button to select US V-CHIP , then press ENTER button to adjust. A Sub Menu Will appear as below. Movie Rating Press ▼ / ▲ button to select Movie Rating , then press ENTER button to adjust. A Sub Menu Will appear as below. Press ▼ / ▲ button to select Rating, then press ENTER...

Page 28 - A Sub Menu Will; Block Unrated Show; Downloadable Rating

27 CANADA V-CHIP Press ▼ / ▲ button to select CANADA V-CHIP , then press ENTER button to adjust. A Sub Menu Will appear as below. The operation of CANADA V-CHIP is the same as the operation of US V-CHIP. Block Unrated Show Press ▼ / ▲ button to select Block Unrated Show , then press ENTER button to ...

Page 29 - Clear Downloadable Data; CHANGE PASSWORD; Source Lock

28 Clear Downloadable Data Press ▼ / ▲ button to select Clear Downloadable Data , then press ENTER button to set the rating. Note : The above two operation only valid when playing the downloadable data stream. The operations are the same as US V-CHIP. CHANGE PASSWORD Press ▼ / ▲ button to select Cha...

Page 30 - Setup Menu; Closed Caption

29 Setup Menu Closed Caption Press ▼ / ▲ button to select the item Closed Caption, then press ◄ / ► button to adjust.

Page 31 - Caption Display

30 Caption Display Press ▼ / ▲ button to select Caption Display , then press ◄ / ► button to select ON or OFF. Analog Caption Type Press ▼ / ▲ button to select Analog Caption Type, then press ◄ / ► button to select the type. Digital Caption Type Press ▼ / ▲ button to select Digital Caption Type, the...

Page 32 - Daylight Saving Time

31 CC Opacity Press ▼ / ▲ button to select CC Opacity , then press ◄ / ► button to select the Opacity. Text Color Press ▼ / ▲ button to select Text Color , then press ◄ / ► button to select the color. CC Background Opacity Press ▼ / ▲ button to select CC Background Opacity, then press ◄ / ► button t...

Page 33 - OTHERS MENU; Blue Back

32 OTHERS MENU Blue Back Press ▼ / ▲ button to select Blue Background, then press ENTER button to select when there is no signal, whether set the background in blue or not. No Signal Power Off Press ▼ / ▲ button to select No Signal Power Off, then press ENTER button to select it On or Off. When set ...

Page 34 - How do I Clean the TV?; IMPORTANT; with clean water and wipe again. Wipe the; Cleaning the Screen

33 How do I Clean the TV? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the TV. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the LED glass. Cleaning the bezel and remote control 1....

Page 35 - Troubleshooting

34 Troubleshooting Problems Solutions NO PICTURE Connect power cord correctly. Turn on power. Connect video cable correctly. Select the input signal source with proper cable connection with the source button. ABNORMAL COLORS Match the colors on the cables to the ports off the back of the television....

Page 38 - Specifications

7 3 Display panel Item Illustration Active Area / Screen Size Diagonal 39 inches 1 n e e r c s e d i W o i t a R t c e p s A 6:9 Pixel Pitch 0.176 (H) x RGB x 0.530 (V) um per one triad Max. of Pixels (Resolution) FHD (1920 x 1080 pixels) resolution Brightness 280 nits (Typical) Contrast 1500:1 (Typ...

Page 40 - FCC Compliance Statement; Reorient or relocate the receiving antenna.

39 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undesired operation. Please Note: T...