RCA RCR860 - Manuals - manualsarea.com

Page 2 - Table of Contents; Eight-Component Universal Remote; Battery Saver

Table of Contents 2 Component keys. ( SAT·CBL, VCR, DVD, TV, AUX-1,AUDIO, DVR, AUX-2 ) CHAN and VOL keys INPUT key – Toggles through all the videosources connected toyour TV, when the remoteis in TV mode. When theremote is in VCR mode, it toggles between VCRand TV input. Dedicated MENU key for DVD d...

Page 3 - Brand Code Search and Entry; Programming the Remote; Direct Code Entry

1. Manually turn on the component you want the remote to control. 2. Locate the Brand Codes in the Code Lists. 3. Press and hold the component key you wish to program. The illuminated component name turns onand remains on. 4. While holding the component key down, press and hold the ON·OFF key. The i...

Page 4 - Programming the AUX Keys

Code Entry, the illuminated component name blinksfour times when the component key is released andturns off. This is an indication that a programmingerror has occurred. Repeat the Direct Code Entryprocess from step 3 and try the next code listed. Programming Methods (continued) (NAME BLINKS) Through...

Page 5 - Auto Code Search and Entry; Code Retrieval

4. Repeat the Manual Code Search and Entry Method. Each time a code turns the component on or off, you have found a code that operates the remote and needsto be tested for maximum functionality. Continue through the code lists, cyclingthrough the codes you have already tried, until you find one that...

Page 6 - Programming the Sleep Timer; Troubleshooting

Because this remote controls more than one component, you must first “tell” theremote which component you wish to operate. That means, if you wish to operateyour TV, you must first press the TV key to put the remote in the TV Mode. The remote stays in the chosen mode until you change it. If your rem...

Page 7 - Limited Lifetime Warranty; Contenido

• You may have pressed an invalid key for the mode the remote is in. • If you’re trying to turn on an RCA, GE or PROSCAN component, press the component key instead of the ON·OFF key. • If you’re trying to change channels, try pressing the OK key after entering the channel number as this is a require...

Page 8 - Control Remoto Universal para Ocho Componentes; Búsqueda y Entrada de Códigos de Marcas

Instalación e Información sobre las Pilas Su control remoto universal requiere dos pilas AA alcalinas (las pilas podrían o no estarincluidas, dependiendo del modelo). Para instalar las pilas: Su control remoto universal ahorra la potencia de las pilas al apagarse automáticamente si se oprime cualqui...

Page 9 - Entrada Directa de Códigos; Cómo Programar las Teclas AUX; Búsqueda y Entrada Manual de Códigos

1. Encienda manualmente el componente que desea manejar con el control remoto. 2. Ubique los Códigos de Marcas en las Listas de Códigos. 3. Oprima y sostenga la tecla del componente que desea programar. El nombre del componente iluminado seenciende y permanece encendido. 4. Mientras oprime la tecla ...

Page 10 - Búsqueda y Entrada Automática de Códigos

Para salir sin guardar en ningún punto de la BúsquedaManual de Códigos, oprima y suelte la tecla CLEAR . 1. Encienda manualmente el componente que desea manejar con el control remoto. 2. Oprima y sostenga la tecla del componente que desea programar. El nombre del componente iluminado seenciende y pe...

Page 12 - Cómo Programar el Reloj de Apagado; Resolución de Problemas

22 Cómo Programar el Reloj de Apagado 1. Oprima y suelte la tecla TV . 2. Oprima y sostenga la tecla SLEEP durante tres segundos. El nombre del componente iluminado se encenderá. 3. Suelte la tecla SLEEP . 4. Con las teclas numéricas, ingrese el tiempo deseado en minutos (desde 1 hasta 99 minutos). ...